Re: nodedev-dumpxml doesn't refresh supported offload NIC capabilities

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/16/2015 10:12 AM, Moshe Levi wrote:

Hi,

 

I was playing with the nodedev-dumpxml to see the supported offload NIC capabilities, and

It seem that if I disable one of offloading capabilities using ethtool command nodedev-dumpxml it still return

the feature as enabled. To get the correct offloading capabilities I have to restart libvirtd.

I was wandering if that is an expected behavior in lbivirt .


the nodedevice driver caches all the information it gets from udev, and tries to rely on udev generating events when something changes. In general this is a bad idea, and has led to at least 2 bug reports I can think of. The function update_caps() in the nodedev driver is intended to be filled in with code to update those attributes of a device that don't get properly updated via udev event responses. It looks like all that would be required in your situation would be to add a call to virNetDevGetFeatures() to the VIR_NODE_DEV_CAP_NET case of the switch in that function. It's complicated a bit by the fact that virNetDevGetFeatures() leaks any existing bitmap of features when it's called. I'm sending a short patch that should fix your problem, which should show up on the list in a few minutes.

 

Please see example below with the rx capabilities disabled.

 

virsh # nodedev-dumpxml net_enp4s0_f4_52_14_11_73_81

<device>                                           

  <name>net_enp4s0_f4_52_14_11_73_81</name>        

  <path>/sys/devices/pci0000:00/0000:00:02.0/0000:04:00.0/net/enp4s0</path>

  <parent>pci_0000_04_00_0</parent>                                        

  <capability type='net'>                                                 

    <interface>enp4s0</interface>                                         

    <address>f4:52:14:11:73:81</address>                                  

    <link speed='40000' state='up'/>                                      

    <feature name='rx'/>                                                  

    <feature name='tx'/>                                                  

    <feature name='sg'/>                                                   

    <feature name='tso'/>                                                 

    <feature name='gso'/>                                                 

    <feature name='gro'/>                                                 

    <feature name='rxvlan'/>                                              

    <feature name='txvlan'/>                                              

    <feature name='rxhash'/>                                                                                   

    <capability type='80203'/>                                            

  </capability>                                                            

</device>            

ethtool -K enp4s0 rx off

virsh # nodedev-dumpxml net_enp4s0_f4_52_14_11_73_81

<device>                                           

  <name>net_enp4s0_f4_52_14_11_73_81</name>        

  <path>/sys/devices/pci0000:00/0000:00:02.0/0000:04:00.0/net/enp4s0</path>

  <parent>pci_0000_04_00_0</parent>                                       

  <capability type='net'>                                                 

    <interface>enp4s0</interface>                                          

    <address>f4:52:14:11:73:81</address>                                  

    <link speed='40000' state='up'/>                                      

    <feature name='rx'/>                                                  

    <feature name='tx'/>                                                  

    <feature name='sg'/>                                                  

    <feature name='tso'/>                                                 

    <feature name='gso'/>                                                  

    <feature name='gro'/>                                                 

    <feature name='rxvlan'/>                                              

    <feature name='txvlan'/>                                               

    <feature name='rxhash'/>                                                                                         

    <capability type='80203'/>                                            

  </capability>                                                           

</device>

 

 

virsh #

[root@r-ae-host05 bin]# ps -ef | grep libvirt

root     16743 23086  0 16:43 pts/2    00:00:00 ../sbin/libvirtd

root     17440 23086  0 16:47 pts/2    00:00:00 grep --color=auto libvirt

[root@r-ae-host05 bin]# kill 16743

[root@r-ae-host05 bin]# ../sbin/libvirtd &

[2] 17489

[1]   Done                    ../sbin/libvirtd

[root@r-ae-host05 bin]#

[root@r-ae-host05 bin]#

[root@r-ae-host05 bin]# ./virsh

 

virsh # nodedev-dumpxml net_enp4s0_f4_52_14_11_73_81

<device>

  <name>net_enp4s0_f4_52_14_11_73_81</name>

  <path>/sys/devices/pci0000:00/0000:00:02.0/0000:04:00.0/net/enp4s0</path>

  <parent>pci_0000_04_00_0</parent>

  <capability type='net'>

    <interface>enp4s0</interface>

    <address>f4:52:14:11:73:81</address>

    <link speed='40000' state='up'/>

    <feature name='tx'/>

    <feature name='sg'/>

    <feature name='tso'/>

    <feature name='gso'/>

    <feature name='gro'/>

    <feature name='rxvlan'/>

    <feature name='txvlan'/>

    <feature name='rxhash'/>

    <feature name='rdma'/>

    <capability type='80203'/>

  </capability>

</device>

 

 

Thanks,

                Moshe Levi.

 



--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list

[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]