Add virDomainPinIOThread to allow setting the CPU affinity for a specific
IOThread based on the output generated from virDomainGetIOThreadsInfo
The API supports updating both the --live domain and the --config data
Signed-off-by: John Ferlan <jferlan@xxxxxxxxxx>
---
include/libvirt/libvirt-domain.h | 5 +++
src/driver-hypervisor.h | 8 +++++
src/libvirt-domain.c | 76 ++++++++++++++++++++++++++++++++++++++++
src/libvirt_public.syms | 1 +
4 files changed, 90 insertions(+)
diff --git a/include/libvirt/libvirt-domain.h b/include/libvirt/libvirt-domain.h
index 9487b80..f2f7eb5 100644
--- a/include/libvirt/libvirt-domain.h
+++ b/include/libvirt/libvirt-domain.h
@@ -1609,6 +1609,11 @@ void virDomainIOThreadsInfoFree(virDomainIOThreadInfoPtr info);
int virDomainGetIOThreadsInfo(virDomainPtr domain,
virDomainIOThreadInfoPtr **info,
unsigned int flags);
+int virDomainPinIOThread(virDomainPtr domain,
+ unsigned int iothread_id,
+ unsigned char *cpumap,
+ int maplen,
+ unsigned int flags);
/**
* VIR_USE_CPU:
diff --git a/src/driver-hypervisor.h b/src/driver-hypervisor.h
index c2b4cd8..1617d0a 100644
--- a/src/driver-hypervisor.h
+++ b/src/driver-hypervisor.h
@@ -386,6 +386,13 @@ typedef int
unsigned int flags);
typedef int
+(*virDrvDomainPinIOThread)(virDomainPtr domain,
+ unsigned int iothread_id,
+ unsigned char *cpumap,
+ int maplen,
+ unsigned int flags);
+
+typedef int
(*virDrvDomainGetSecurityLabel)(virDomainPtr domain,
virSecurityLabelPtr seclabel);
@@ -1260,6 +1267,7 @@ struct _virHypervisorDriver {
virDrvDomainGetVcpus domainGetVcpus;
virDrvDomainGetMaxVcpus domainGetMaxVcpus;
virDrvDomainGetIOThreadsInfo domainGetIOThreadsInfo;
+ virDrvDomainPinIOThread domainPinIOThread;
virDrvDomainGetSecurityLabel domainGetSecurityLabel;
virDrvDomainGetSecurityLabelList domainGetSecurityLabelList;
virDrvNodeGetSecurityModel nodeGetSecurityModel;
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index c43c8f6..9297a2a 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -7967,6 +7967,82 @@ virDomainIOThreadsInfoFree(virDomainIOThreadInfoPtr info)
/**
+ * virDomainPinIOThread:
+ * @domain: a domain object
+ * @iothread_id: the IOThread ID to set the CPU affinity
+ * @cpumap: pointer to a bit map of real CPUs (in 8-bit bytes) (IN)
+ * Each bit set to 1 means that corresponding CPU is usable.
+ * Bytes are stored in little-endian order: CPU0-7, 8-15...
+ * In each byte, lowest CPU number is least significant bit.
+ * @maplen: number of bytes in cpumap, from 1 up to size of CPU map in
+ * underlying virtualization system (Xen...).
+ * If maplen < size, missing bytes are set to zero.
+ * If maplen > size, failure code is returned.
+ * @flags: bitwise-OR of virDomainModificationImpact
+ *
+ * Dynamically change the real CPUs which can be allocated to an IOThread.
+ * This function may require privileged access to the hypervisor.
+ *
+ * @flags may include VIR_DOMAIN_AFFECT_LIVE or VIR_DOMAIN_AFFECT_CONFIG.
+ * Both flags may be set.
+ * If VIR_DOMAIN_AFFECT_LIVE is set, the change affects a running domain
+ * and may fail if domain is not alive.
+ * If VIR_DOMAIN_AFFECT_CONFIG is set, the change affects persistent state,
+ * and will fail for transient domains. If neither flag is specified (that is,
+ * @flags is VIR_DOMAIN_AFFECT_CURRENT), then an inactive domain modifies
+ * persistent setup, while an active domain is hypervisor-dependent on whether
+ * just live or both live and persistent state is changed.
+ * Not all hypervisors can support all flag combinations.
+ *
+ * See also virDomainGetIOThreadsInfo for querying this information.
+ *
+ * Returns 0 in case of success, -1 in case of failure.
+ */
+int
+virDomainPinIOThread(virDomainPtr domain,
+ unsigned int iothread_id,
+ unsigned char *cpumap,
+ int maplen,
+ unsigned int flags)
+{
+ virConnectPtr conn;
+
+ VIR_DOMAIN_DEBUG(domain, "iothread_id=%u, cpumap=%p, maplen=%d",
+ iothread_id, cpumap, maplen);
+
+ virResetLastError();
+
+ virCheckDomainReturn(domain, -1);
+ conn = domain->conn;
+
+ virCheckReadOnlyGoto(conn->flags, error);
+ if ((unsigned short) iothread_id != iothread_id) {
+ virReportError(VIR_ERR_OVERFLOW, _("input too large: %u"),
+ iothread_id);
+ goto error;
+ }
+ virCheckPositiveArgGoto(iothread_id, error);
+ virCheckNonNullArgGoto(cpumap, error);
+ virCheckPositiveArgGoto(maplen, error);
+
+ if (conn->driver->domainPinIOThread) {
+ int ret;
+ ret = conn->driver->domainPinIOThread(domain, iothread_id,
+ cpumap, maplen, flags);
+ if (ret < 0)
+ goto error;
+ return ret;
+ }
+
+ virReportUnsupportedError();
+
+ error:
+ virDispatchError(domain->conn);
+ return -1;
+}
+
+
+/**
* virDomainGetSecurityLabel:
* @domain: a domain object
* @seclabel: pointer to a virSecurityLabel structure
diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms
index 34852c1..803d5a1 100644
--- a/src/libvirt_public.syms
+++ b/src/libvirt_public.syms
@@ -699,6 +699,7 @@ LIBVIRT_1.2.14 {
global:
virDomainIOThreadsInfoFree;
virDomainGetIOThreadsInfo;
+ virDomainPinIOThread;
} LIBVIRT_1.2.12;
# .... define new API here using predicted next version number ....
--
2.1.0
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list