Hi,
I am following the below link to install a Fedora19 guest on Fedora19 Host.
Version :
libvirtd (libvirt) 1.0.5.1,
QEMU emulator version 1.4.2, Copyright (c) 2003-2008 Fabrice Bellard
I have the iso which I loop mounted and created a http repo using python module "python -m SimpleHTTPServer". This repo is properly accessible and the guest is able to pull the initrd.img and vmlinuz but further it fails.
Please find the attached xml and console messages and let me know how to proceed further.
Thanks,
Chandrashekar
+ tree=http://192.168.122.1:8000 + virt-install --connect=qemu:///system --network=network:default --initrd-inject=fed-minimal.ks '--extra-args=ks=file:/fed-minimal.ks console=tty0 console=ttyS0,115200' --name=f15testbox --disk /var/lib/libvirt/images/f15testbox.img,size=20 --ram 2048 --vcpus=2 --check-cpu --accelerate --hvm --location=http://192.168.122.1:8000 --nographics Starting install... Retrieving file .treeinfo... | 2.2 kB 00:00:00 !!! Retrieving file vmlinuz... | 9.6 MB 00:00:00 !!! Retrieving file initrd.img... | 63 MB 00:00:00 !!! Creating domain... | 0 B 00:00:00 Connected to domain f15testbox Escape character is ^] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.9.5-301.fc19.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.8.1 20130603 (Red Hat 4.8.1-1) (GCC) ) #1 SMP Tue Jun 11 19:39:38 UTC 2013 [ 0.000000] Command line: method=http://192.168.122.1:8000 ks=file:/fed-minimal.ks console=tty0 console=ttyS0,115200 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fffe000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] Hypervisor detected: KVM [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7fffe max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000fdad0-0x000fdadf] mapped at [ffff8800000fdad0] [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x7de00000-0x7dffffff] [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ddfffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff] [ 0.000000] init_memory_mapping: [mem 0x7e000000-0x7fffdfff] [ 0.000000] RAMDISK: [mem 0x7e0a0000-0x7ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd940 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000007fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000007fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000007fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000007fffff40 00040 [ 0.000000] ACPI: SSDT 000000007ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000007ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000007ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffdfff] [ 0.000000] NODE_DATA [mem 0x7e08c000-0x7e09ffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:7fffc001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7fffdfff] [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007de00000 s85120 r8192 d21376 u1048576 [ 0.000000] kvm-clock: cpu 0, msr 0:7fffc001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 7de0de80 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515975 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: method=http://192.168.122.1:8000 ks=file:/fed-minimal.ks console=tty0 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 2015260k/2097144k available (6473k kernel code, 392k absent, 81492k reserved, 6764k data, 1352k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:8448 nr_irqs:512 16 [ 0.000000] Console: colour *CGA 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Detected 2100.040 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004000] Calibrating delay loop (skipped) preset value.. 4200.08 BogoMIPS (lpj=2100040) [ 0.005005] pid_max: default: 32768 minimum: 301 [ 0.006044] Security Framework initialized [ 0.007015] SELinux: Initializing. [ 0.009021] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011574] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.012356] Mount-cache hash table entries: 256 [ 0.014190] Initializing cgroup subsys cpuacct [ 0.015006] Initializing cgroup subsys memory [ 0.016016] Initializing cgroup subsys devices [ 0.017004] Initializing cgroup subsys freezer [ 0.018004] Initializing cgroup subsys net_cls [ 0.019004] Initializing cgroup subsys blkio [ 0.020004] Initializing cgroup subsys perf_event [ 0.021104] mce: CPU supports 10 MCE banks [ 0.022073] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.022073] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.022073] tlb_flushall_shift: -1 [ 0.023210] Freeing SMP alternatives: 24k freed [ 0.029155] ACPI: Core revision 20130117 [ 0.031085] ACPI: All ACPI Tables successfully acquired [ 0.032142] ftrace: allocating 24409 entries in 96 pages [ 0.045229] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.046002] smpboot: CPU0: AMD QEMU Virtual CPU version 1.4.2 (fam: 06, model: 02, stepping: 03) [ 0.051000] Performance Events: Broken PMU hardware detected, using software events only. [ 0.052002] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff) [ 0.055803] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.057043] smpboot: Booting Node 0, Processors #1 OK [ 0.004000] kvm-clock: cpu 1, msr 0:7fffc041, secondary cpu clock [ 0.073818] Brought up 2 CPUs [ 0.073800] KVM setup async PF for cpu 1 [ 0.073800] kvm-stealtime: cpu 1, msr 7df0de80 [ 0.074003] smpboot: Total of 2 processors activated (8400.16 BogoMIPS) [ 0.076249] devtmpfs: initialized [ 0.079122] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.080094] RTC time: 18:13:26, date: 02/19/15 [ 0.081066] NET: Registered protocol family 16 [ 0.083036] ACPI: bus type PCI registered [ 0.084023] PCI: Using configuration type 1 for base access [ 0.086108] bio: create slab <bio-0> at 0 [ 0.087078] ACPI: Added _OSI(Module Device) [ 0.088003] ACPI: Added _OSI(Processor Device) [ 0.089002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.090002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.093474] ACPI: Interpreter enabled [ 0.094008] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.096003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.098019] ACPI: (supports S0 S3 S4 S5) [ 0.099002] ACPI: Using IOAPIC for interrupt routing [ 0.100013] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.104816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.106010] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.107033] PCI host bridge to bus 0000:00 [ 0.107880] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.108000] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.108000] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.108000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.108000] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.127027] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.128015] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.152000] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.152000] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.153220] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.154655] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.156298] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.157638] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.159494] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.160637] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.161363] ACPI: No dock devices found. [ 0.162065] vgaarb: loaded [ 0.163090] SCSI subsystem initialized [ 0.164003] ACPI: bus type ATA registered [ 0.165085] ACPI: bus type USB registered [ 0.166022] usbcore: registered new interface driver usbfs [ 0.167015] usbcore: registered new interface driver hub [ 0.168071] usbcore: registered new device driver usb [ 0.169078] PCI: Using ACPI for IRQ routing [ 0.170281] NetLabel: Initializing [ 0.171002] NetLabel: domain hash size = 128 [ 0.172001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.173015] NetLabel: unlabeled traffic allowed by default [ 0.174051] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.175024] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.176109] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.183037] Switching to clocksource kvm-clock [ 0.192152] pnp: PnP ACPI init [ 0.192881] ACPI: bus type PNP registered [ 0.194426] pnp: PnP ACPI: found 6 devices [ 0.195379] ACPI: bus type PNP unregistered [ 0.211605] NET: Registered protocol family 2 [ 0.212800] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.214402] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.215810] TCP: Hash tables configured (established 16384 bind 16384) [ 0.217208] TCP: reno registered [ 0.217940] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.219171] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.220589] NET: Registered protocol family 1 [ 0.221504] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.222706] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.223883] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.225442] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.227518] Unpacking initramfs... [ 4.654542] Freeing initrd memory: 32064k freed [ 4.674395] Initialise system trusted keyring [ 4.675454] audit: initializing netlink socket (disabled) [ 4.676568] type=2000 audit(1424369610.676:1): initialized [ 4.705092] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.708678] VFS: Disk quotas dquot_6.5.2 [ 4.709590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.711500] msgmni has been set to 3998 [ 4.714869] alg: No test for stdrng (krng) [ 4.717256] NET: Registered protocol family 38 [ 4.718226] Key type asymmetric registered [ 4.719070] Asymmetric key parser 'x509' registered [ 4.720176] Asymmetric key parser 'pefile' registered [ 4.721284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.722937] io scheduler noop registered [ 4.723765] io scheduler deadline registered [ 4.724654] io scheduler cfq registered (default) [ 4.725780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.727002] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 4.728331] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 4.729662] acpiphp: Slot [2] registered [ 4.730503] acpiphp: Slot [3] registered [ 4.731336] acpiphp: Slot [4] registered [ 4.732184] acpiphp: Slot [5] registered [ 4.733014] acpiphp: Slot [6] registered [ 4.733826] acpiphp: Slot [7] registered [ 4.734656] acpiphp: Slot [8] registered [ 4.735487] acpiphp: Slot [9] registered [ 4.736318] acpiphp: Slot [10] registered [ 4.737162] acpiphp: Slot [11] registered [ 4.737982] acpiphp: Slot [12] registered [ 4.738831] acpiphp: Slot [13] registered [ 4.739678] acpiphp: Slot [14] registered [ 4.740524] acpiphp: Slot [15] registered [ 4.741385] acpiphp: Slot [16] registered [ 4.742227] acpiphp: Slot [17] registered [ 4.743082] acpiphp: Slot [18] registered [ 4.743908] acpiphp: Slot [19] registered [ 4.744765] acpiphp: Slot [20] registered [ 4.745615] acpiphp: Slot [21] registered [ 4.746461] acpiphp: Slot [22] registered [ 4.747310] acpiphp: Slot [23] registered [ 4.748170] acpiphp: Slot [24] registered [ 4.748994] acpiphp: Slot [25] registered [ 4.749850] acpiphp: Slot [26] registered [ 4.750715] acpiphp: Slot [27] registered [ 4.751556] acpiphp: Slot [28] registered [ 4.752409] acpiphp: Slot [29] registered [ 4.753255] acpiphp: Slot [30] registered [ 4.754097] acpiphp: Slot [31] registered [ 4.755154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 4.756636] ACPI: Power Button [PWRF] [ 4.758567] GHES: HEST is not enabled! [ 4.759821] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 4.764273] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 4.766843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.792401] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.795083] Non-volatile memory driver v1.3 [ 4.795958] Linux agpgart interface v0.103 [ 4.798770] loop: module loaded [ 4.801629] scsi0 : ata_piix [ 4.802529] scsi1 : ata_piix [ 4.803262] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 [ 4.804606] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 [ 4.806043] libphy: Fixed MDIO Bus: probed [ 4.807828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.811338] ehci-pci: EHCI PCI platform driver [ 4.813696] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.816953] uhci_hcd: USB Universal Host Controller Interface driver [ 4.822286] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 4.823933] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 4.825564] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040 [ 4.826810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.828407] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.830111] usb usb1: Product: UHCI Host Controller [ 4.831244] usb usb1: Manufacturer: Linux 3.9.5-301.fc19.x86_64 uhci_hcd [ 4.832782] usb usb1: SerialNumber: 0000:00:01.2 [ 4.834263] hub 1-0:1.0: USB hub found [ 4.835245] hub 1-0:1.0: 2 ports detected [ 4.836421] usbcore: registered new interface driver usbserial [ 4.837952] usbcore: registered new interface driver usbserial_generic [ 4.839470] usbserial: USB Serial support registered for generic [ 4.840888] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.844419] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.847450] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.850830] mousedev: PS/2 mouse device common for all mice [ 4.854950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 4.861162] rtc_cmos 00:00: RTC can wake from S4 [ 4.870104] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 4.874441] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 4.879476] device-mapper: uevent: version 1.0.3 [ 4.882406] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx [ 4.887427] cpuidle: using governor ladder [ 4.890450] cpuidle: using governor menu [ 4.892968] EFI Variables Facility v0.08 2004-May-17 [ 4.896104] hidraw: raw HID events driver (C) Jiri Kosina [ 4.899603] usbcore: registered new interface driver usbhid [ 4.903233] usbhid: USB HID core driver [ 4.905620] drop_monitor: Initializing network drop monitor service [ 4.909795] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.913188] TCP: cubic registered [ 4.915306] Initializing XFRM netlink socket [ 4.918193] NET: Registered protocol family 10 [ 4.921378] mip6: Mobile IPv6 [ 4.923305] NET: Registered protocol family 17 [ 4.926650] Loading compiled-in X.509 certificates [ 4.933183] Loaded X.509 cert 'Fedora kernel signing key: 78fb4a79e920e6faab7a0c9f59d1d38942b01496' [ 4.938673] registered taskstats version 1 [ 4.942645] Magic number: 3:480:241 [ 4.945612] rtc_cmos 00:00: setting system clock to 2015-02-19 18:13:31 UTC (1424369611) [ 4.978469] Freeing unused kernel memory: 1352k freed [ 4.982555] Write protecting the kernel read-only data: 12288k [ 4.999944] Freeing unused kernel memory: 1708k freed [ 5.014316] Freeing unused kernel memory: 1332k freed [ 5.024373] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 5.027521] systemd[1]: Detected virtualization 'kvm'. [ 5.028760] systemd[1]: Running in initial RAM disk. Welcome to Fedora 19 (Schrödinger’s Cat) dracut-029-1.fc19 (Initramfs)! [ 5.031654] systemd[1]: No hostname configured. [ 5.037891] systemd[1]: Set hostname to <localhost>. [ 5.041267] systemd[1]: Initializing machine ID from KVM UUID. [ 5.063425] systemd[1]: Starting Timers. [ OK ] Reached target Timers. [ 5.069170] systemd[1]: Reached target Timers. [ 5.072736] systemd[1]: Starting Encrypted Volumes. [ OK ] Reached target Encrypted Volumes. [ 5.080559] systemd[1]: Reached target Encrypted Volumes. [ 5.084157] systemd[1]: Starting Journal Socket. [ OK ] Listening on Journal Socket. [ 5.092722] systemd[1]: Listening on Journal Socket. [ 5.096755] systemd[1]: Starting dracut cmdline hook... Starting dracut cmdline hook... [ 5.105702] systemd[1]: Started Load Kernel Modules. [ 5.109066] systemd[1]: Starting Journal Service... Starting Journal Service... [ OK ] Started Journal Service. [ 5.120446] systemd[1]: Started Journal Service. [ 5.127477] systemd[1]: Starting udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.134622] systemd[1]: Listening on udev Kernel Socket. [ 5.139093] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 5.140357] systemd[1]: Starting udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.149926] systemd[1]: Listening on udev Control Socket. [ 5.153536] systemd[1]: Starting Sockets. [ OK ] Reached target Sockets. [ 5.159392] systemd[1]: Reached target Sockets. [ 5.162484] systemd[1]: Starting Device-Mapper Multipath Device Controller... Starting Device-Mapper Multipath Device Controller... [ 5.174354] systemd[1]: Starting Swap. [ OK ] Reached target Swap. [ 5.179870] systemd[1]: Reached target Swap. [ 5.185152] systemd[1]: Starting Local File Systems. [ OK ] Reached target Local File Systems. [ 5.192219] systemd[1]: Reached target Local File Systems. [ 5.193954] device-mapper: multipath: version 1.5.1 loaded [ OK ] Started Device-Mapper Multipath Device Controller. [ 5.301202] usb 1-1: New USB device found, idVendor=0627, idProduct=0001 [ 5.305639] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5 [ 5.310098] usb 1-1: Product: QEMU USB Tablet [ 5.312925] usb 1-1: Manufacturer: QEMU [ 5.315629] usb 1-1: SerialNumber: 42 [ 5.318249] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 5.329730] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2 [ 5.336656] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 dracut-cmdline[52]: Warning: 'method=' is deprecated. Using 'repo=http://192.168.122.1:8000' instead. [ 5.728749] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ OK ] Started dracut cmdline hook. Starting Setup Virtual Console... Starting dracut pre-udev hook... [ OK ] Started Setup Virtual Console. [ 6.689692] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 6.696595] Loading iSCSI transport class v2.0-870. [ 6.705637] iscsi: registered transport (tcp) [ 6.715569] alua: device handler registered [ 6.726797] emc: device handler registered [ 6.737693] hp_sw: device handler registered [ 6.748943] rdac: device handler registered [ 6.777812] FDC 0 is a S82078B [ 6.797501] No iBFT detected. [ 6.808455] md: raid0 personality registered for level 0 [ 6.821798] md: raid1 personality registered for level 1 [ 6.833813] async_tx: api initialized (async) [ 6.841716] xor: measuring software checksum speed [ 6.854052] prefetch64-sse: 3140.000 MB/sec [ 6.866034] generic_sse: 2964.000 MB/sec [ 6.868737] xor: using function: prefetch64-sse (3140.000 MB/sec) [ 6.901108] raid6: sse2x1 1113 MB/s [ 6.920089] raid6: sse2x2 1679 MB/s [ 6.939088] raid6: sse2x4 2058 MB/s [ 6.941668] raid6: using algorithm sse2x4 (2058 MB/s) [ 6.945005] raid6: using intx1 recovery algorithm [ 6.970212] md: raid6 personality registered for level 6 [ 6.973666] md: raid5 personality registered for level 5 [ 6.976968] md: raid4 personality registered for level 4 [ 6.998377] md: raid10 personality registered for level 10 [ 7.010660] md: linear personality registered for level -1 [ 7.035858] device-mapper: multipath round-robin: version 1.0.0 loaded [ 7.082199] RPC: Registered named UNIX socket transport module. [ 7.083894] RPC: Registered udp transport module. [ 7.085065] RPC: Registered tcp transport module. [ 7.086314] RPC: Registered tcp NFSv4.1 backchannel transport module. [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ 7.281023] systemd-udevd[262]: starting version 204 [ OK ] Started udev Kernel Device Manager. Starting dracut pre-trigger hook... [ 7.544396] vda: unknown partition table [ OK ] Started dracut pre-trigger hook. Starting udev Coldplug all Devices... [ OK ] Started udev Coldplug all Devices. Starting dracut initqueue hook... Starting Show Plymouth Boot Screen... [ OK ] Reached target System Initialization. [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. dracut-initqueue[338]: % Total % Received % Xferd Average Speed Time Time Time Current dracut-initqueue[338]: Dload Upload Total Spent Left Speed dracut-initqueue[338]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed connect to 192.168.122.1:8000; No route to host dracut-initqueue[338]: Warning: Downloading 'http://192.168.122.1:8000/.treeinfo' failed! dracut-initqueue[338]: Warning: can't find installer mainimage path in .treeinfo dracut-initqueue[338]: % Total % Received % Xferd Average Speed Time Time Time Current dracut-initqueue[338]: Dload Upload Total Spent Left Speed dracut-initqueue[338]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed connect to 192.168.122.1:8000; No route to host dracut-initqueue[338]: Warning: Downloading 'http://192.168.122.1:8000/LiveOS/squashfs.img' failed! [ 8.544208] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready dracut-initqueue[338]: % Total % Received % Xferd Average Speed Time Time Time Current dracut-initqueue[338]: Dload Upload Total Spent Left Speed dracut-initqueue[338]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed connect to 192.168.122.1:8000; No route to host dracut-initqueue[338]: Warning: Downloading 'http://192.168.122.1:8000/.treeinfo' failed! dracut-initqueue[338]: Warning: can't find installer mainimage path in .treeinfo dracut-initqueue[338]: % Total % Received % Xferd Average Speed Time Time Time Current dracut-initqueue[338]: Dload Upload Total Spent Left Speed dracut-initqueue[338]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed connect to 192.168.122.1:8000; No route to host dracut-initqueue[338]: Warning: Downloading 'http://192.168.122.1:8000/LiveOS/squashfs.img' failed!
#!/bin/bash set -x # Note: Replace this with your local Fedora tree if you have one. tree='http://192.168.122.1:8000' virt-install --connect=qemu:///system \ --network=network:default \ --initrd-inject=fed-minimal.ks \ --extra-args="ks=file:/fed-minimal.ks \ console=tty0 console=ttyS0,115200" \ --name=f15testbox \ --disk /var/lib/libvirt/images/f15testbox.img,size=20 \ --ram 2048 \ --vcpus=2 \ --check-cpu \ --accelerate \ --hvm \ --location=$tree \ --nographics Kickstart file : # Kickstart file automatically generated by anaconda. #version=DEVEL #url --url http://mirrors.kernel.org/fedora/releases/7/Fedora/i386/os #ks=http://127.0.0.1/ks.cfg #ks=http://localhost/ks.cfg #url --url http://ftp.usf.edu/pub/fedora/linux/releases/14/Fedora/i386/os url --url http://192.168.122.1:8000 install cdrom lang en_US.UTF-8 keyboard us #network --onboot yes --device eth0 --bootproto dhcp --noipv6 network --onboot yes --device eth0 --bootproto static --ip 192.168.122.100 --netmask 255.255.255.0 --gateway 192.168.122.1 --noipv6 timezone --utc America/New_York rootpw --iscrypted $6$s9i1bQbmW4oSWMJc$0oHfSz0b/d90EvHx7cy70RJGIHrP1awzAgL9A3x2tbkyh72P3kN41vssaI3/SJf4Y4qSo6zxc2gZ3srzc4ACX1 selinux --permissive authconfig --enableshadow --passalgo=sha512 --enablefingerprint firewall --service=ssh # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work #I am deleting the old partitions with this clearpart --all --drives=sda #I am creating partitions here #I will create the lvm stuff farther down part /boot --fstype=ext4 --size=500 --ondisk=sda --asprimary part pv.5xwrsR-ldgG-FEmM-2Zu5-Jn3O-sx9T-unQUOe --grow --size=500 --ondisk=sda --asprimary #Very important to have the two part lines before the lvm stuff volgroup VG --pesize=32768 pv.5xwrsR-ldgG-FEmM-2Zu5-Jn3O-sx9T-unQUOe logvol / --fstype=ext4 --name=lv_root --vgname=VG --size=40960 logvol /home --fstype=ext4 --name=lv_home --vgname=VG --size=25600 logvol swap --fstype swap --name=lv_swap --vgname=VG --size=4096 bootloader --location=mbr --driveorder=sda --append="rhgb quiet" %packages @admin-tools #@editors #@fonts @gnome-desktop #@games #@graphical-internet #@graphics @hardware-support @input-methods #@java #@office #@online-docs @printing @sound-and-video @text-internet @base-x xfsprogs mtools #gpgme #openoffice.org-opensymbol-fonts #gvfs-obexftp hdparm #gok #iok #vorbis-tools jack-audio-connection-kit #ncftp gdm %end # Reboot after installation reboot
-- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list