On Thu, Nov 20, 2014 at 06:46:41PM -0800, Josh Stone wrote:
This adds a new "localOnly" attribute on the domain element of the network xml. With this set to "yes", DNS requests under that domain will only be resolved by libvirt's dnsmasq, never forwarded upstream. This was how it worked before commit f69a6b987d616, and I found that functionality useful. For example, I have my host's NetworkManager dnsmasq configured to forward that domain to libvirt's dnsmasq, so I can easily resolve guest names from outside. But if libvirt's dnsmasq doesn't know a name and forwards it to the host, I'd get an endless forwarding loop. Now I can set localOnly="yes" to prevent the loop.
I've found 2 things in this patch I'm not sure about: 1) According to the documentation about --local= parameter, it says: "Setting this flag does not suppress reading of /etc/resolv.conf, use -R to do that." Shouldn't "no-resolv" be added as the option you want in the config file? 2) If your answer to the previous question is "NO", which might very well be the case, for example if you don't want to forward that one particular domain only (and I misunderstood the commit message), I think you should just use the ",local" subparameter of the domain parameter (domain=example.com,local). If you want to use the local= parameter, you would have to parse the domain value as it can be multiple domains separated by a comma and for domains that are actually IP addresses, you'd need to add the reverse of that (e.g. 122.168.192.in-addr.arpa).
Signed-off-by: Josh Stone <jistone@xxxxxxxxxx>
Cc: Laine Stump <laine@xxxxxxxxx>
---
docs/formatnetwork.html.in | 12 +++++++++++-
docs/schemas/network.rng | 3 +++
src/conf/network_conf.c | 5 +++++
src/conf/network_conf.h | 1 +
src/network/bridge_driver.c | 5 +++++
.../networkxml2confdata/nat-network-dns-local-domain.conf | 14 ++++++++++++++
tests/networkxml2confdata/nat-network-dns-local-domain.xml | 9 +++++++++
tests/networkxml2conftest.c | 1 +
8 files changed, 49 insertions(+), 1 deletion(-)
create mode 100644 tests/networkxml2confdata/nat-network-dns-local-domain.conf
create mode 100644 tests/networkxml2confdata/nat-network-dns-local-domain.xml
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index dc438aee8622..defcdba00930 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -82,7 +82,7 @@
<pre>
...
<bridge name="virbr0" stp="on" delay="5"/>
- <domain name="example.com"/>
+ <domain name="example.com" localOnly="no"/>
<forward mode="nat" dev="eth0"/>
...</pre>
@@ -113,6 +113,16 @@
a <code><forward></code> mode of "nat" or "route" (or an
isolated network with no <code><forward></code>
element). <span class="since">Since 0.4.5</span>
+
+ <p>
+ If the optional <code>localOnly</code> attribute on the
+ <code>domain</code> element is "yes", then DNS requests under
+ this domain will only be resolved by the virtual network's own
+ DNS server - they will not be forwarded to the host's upstream
+ DNS server. If <code>localOnly</code> is "no", and by
+ default, unresolved requests <b>will</b> be forwarded.
+ <span class="since">Since 1.2.11</span>
+ </p>
</dd>
<dt><code>forward</code></dt>
<dd>Inclusion of the <code>forward</code> element indicates that
diff --git a/docs/schemas/network.rng b/docs/schemas/network.rng
index 4546f8037580..a1da28092375 100644
--- a/docs/schemas/network.rng
+++ b/docs/schemas/network.rng
@@ -225,6 +225,9 @@
<optional>
<element name="domain">
<attribute name="name"><ref name="dnsName"/></attribute>
+ <optional>
+ <attribute name="localOnly"><ref name="virYesNo"/></attribute>
+ </optional>
</element>
</optional>
diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c
index 067334e87cb0..61451c39805f 100644
--- a/src/conf/network_conf.c
+++ b/src/conf/network_conf.c
@@ -2083,6 +2083,11 @@ virNetworkDefParseXML(xmlXPathContextPtr ctxt)
/* Parse network domain information */
def->domain = virXPathString("string(./domain[1]/@name)", ctxt);
+ tmp = virXPathString("string(./domain[1]/@localOnly)", ctxt);
+ if (tmp) {
+ def->domain_local = STRCASEEQ(tmp, "yes");
+ VIR_FREE(tmp);
+ }
if ((bandwidthNode = virXPathNode("./bandwidth", ctxt)) != NULL &&
(def->bandwidth = virNetDevBandwidthParse(bandwidthNode, -1)) == NULL)
diff --git a/src/conf/network_conf.h b/src/conf/network_conf.h
index 660cd2d10cd1..6308a7dcfbf7 100644
--- a/src/conf/network_conf.h
+++ b/src/conf/network_conf.h
@@ -232,6 +232,7 @@ struct _virNetworkDef {
char *bridge; /* Name of bridge device */
char *domain;
+ bool domain_local; /* Choose not to forward dns for this domain */
unsigned long delay; /* Bridge forward delay (ms) */
bool stp; /* Spanning tree protocol */
virMacAddr mac; /* mac address of bridge device */
diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
index 6cb421c52850..dfa375d3aa72 100644
--- a/src/network/bridge_driver.c
+++ b/src/network/bridge_driver.c
@@ -912,6 +912,11 @@ networkDnsmasqConfContents(virNetworkObjPtr network,
}
if (network->def->domain) {
+ if (network->def->domain_local) {
+ virBufferAsprintf(&configbuf,
+ "local=/%s/\n",
+ network->def->domain);
+ }
virBufferAsprintf(&configbuf,
"domain=%s\n"
"expand-hosts\n",
diff --git a/tests/networkxml2confdata/nat-network-dns-local-domain.conf b/tests/networkxml2confdata/nat-network-dns-local-domain.conf
new file mode 100644
index 000000000000..5f41b9186cbc
--- /dev/null
+++ b/tests/networkxml2confdata/nat-network-dns-local-domain.conf
@@ -0,0 +1,14 @@
+##WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
+##OVERWRITTEN AND LOST. Changes to this configuration should be made using:
+## virsh net-edit default
+## or other application using the libvirt API.
+##
+## dnsmasq conf file created by libvirt
+strict-order
+local=/example.com/
+domain=example.com
+expand-hosts
+except-interface=lo
+bind-dynamic
+interface=virbr0
+addn-hosts=/var/lib/libvirt/dnsmasq/default.addnhosts
diff --git a/tests/networkxml2confdata/nat-network-dns-local-domain.xml b/tests/networkxml2confdata/nat-network-dns-local-domain.xml
new file mode 100644
index 000000000000..a92d71f1f2f6
--- /dev/null
+++ b/tests/networkxml2confdata/nat-network-dns-local-domain.xml
@@ -0,0 +1,9 @@
+<network>
+ <name>default</name>
+ <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9c</uuid>
+ <forward dev='eth0' mode='nat'/>
+ <bridge name='virbr0' stp='on' delay='0' />
+ <domain name='example.com' localOnly='yes'/>
+ <ip address='192.168.122.1' netmask='255.255.255.0'>
+ </ip>
+</network>
diff --git a/tests/networkxml2conftest.c b/tests/networkxml2conftest.c
index 4f1d9345ffe4..d2aa8c62cfcd 100644
--- a/tests/networkxml2conftest.c
+++ b/tests/networkxml2conftest.c
@@ -146,6 +146,7 @@ mymain(void)
DO_TEST("nat-network-dns-hosts", full);
DO_TEST("nat-network-dns-forward-plain", full);
DO_TEST("nat-network-dns-forwarders", full);
+ DO_TEST("nat-network-dns-local-domain", full);
DO_TEST("dhcp6-network", dhcpv6);
DO_TEST("dhcp6-nat-network", dhcpv6);
DO_TEST("dhcp6host-routed-network", dhcpv6);
--
2.1.0
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
Attachment:
signature.asc
Description: Digital signature
-- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list