On 11/11/2014 11:34 AM, Pavel Hrdina wrote:
> On 11/11/2014 04:13 PM, John Ferlan wrote:
>>
>>
>> On 11/05/2014 09:02 AM, Pavel Hrdina wrote:
>>> Commit 6e5c79a1 tried to fix deadlock between nwfilter{Define,Undefine}
>>> and starting of guest, but this same deadlock is also for
>>> updating/attaching network device to domain.
>>
>> The referenced commit has a roadmap of sorts of what the lock is -
>> perhaps you could add similar details here for before and after.
>
> In that case I can do copy&paste of that roadmap as it's the same and
> this patch only extend the referenced one.
>
>>
>> While more of a pain logistically - separating out the patches into
>> single changes may make it easier to list the bad locking order followed
>> by the order the commit changes.
>>
>> The ones that are most odd are the places where you take out the lock in
>> the middle of a function. That seems to go against the original commit
>> which takes them out right after the flags check. In particular that's
>> the qemuDomainRestoreFlags and qemuMigrationPrepareAny changes.
>
> The order of the nwfilter lock and flags could be the same in all
> functions, that's a good point. My intention was to lock the
> nwfilterRead right before the vm is locked because the deadlock is
> between the vm and nwfilter objects.
>
> However I don't quiet understand why you would like to split the patch
> into a series. All the paths leads to the same nwfilter call
> "virDomainConfNWFilterInstantiate" and that's the only function callable
> outside of nwfilter that could cause the deadlock.
>
If the bad locking order is the same for each, then I suppose it's not
necessary to copy commit message and make separate patches. It was
mostly a suggestion considering you're changing 6 API's.
Also it wasn't perfectly clear about the order especially for the
Restore/Migration changes where the lock is taken out in the middle of
each function. Furthermore for those cases, we can get to the cleanup
without the lock and do an unlock, which perhaps doesn't do anything,
but it's been a while since I've thought about the guts of thread mutex
lock/unlock. May not occur in these paths, but I seem to remember if
your thread has the read lock and attempts to acquire the read lock
again, then the thread code does a refcount++ type operation. The unlock
would normally refcount-- for each and free the lock when zero. Now in
the case where you're jumping to cleanup, you could decr a refcount
which would be unexpected. My disclaimer is this was a different OS
(hp-ux) in a prior job where there was a mix of mutex locks and file
locks that caused all sorts of issues...
John
>>
>>>
>>> The deadlock was introduced by removing global QEMU driver lock because
>>> nwfilter was counting on this lock and ensure that all driver locks are
>>> locked inside of nwfilter{Define,Undefine}.
>>>
>>> This patch extends usage of virNWFilterReadLockFilterUpdates to prevent
>>> the deadlock for all possible paths in QEMU driver. LXC and UML drivers
>>> still have global lock.
>>>
>>> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143780
>>>
>>> Signed-off-by: Pavel Hrdina <phrdina@xxxxxxxxxx>
>>> ---
>>>
>>> This is temporary fix for the deadlock issue as I'm planning to create global
>>> libvirt jobs (similar to QEMU domain jobs) and use it for other drivers and
>>> for example for nwfilters too.
>>>
>>> src/qemu/qemu_driver.c | 12 ++++++++++++
>>> src/qemu/qemu_migration.c | 3 +++
>>> src/qemu/qemu_process.c | 4 ++++
>>> 3 files changed, 19 insertions(+)
>>>
>>> diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
>>> index 6acaea8..9e6f505 100644
>>
>> [1] Usage around virQEMUDriverGetConfig() calls isn't consistent. In
>> particular qemuDomainAttachDeviceFlags() will lock/unlock in different
>> order.
>>
>>> --- a/src/qemu/qemu_driver.c
>>> +++ b/src/qemu/qemu_driver.c
>>> @@ -5937,6 +5937,8 @@ qemuDomainRestoreFlags(virConnectPtr conn,
>>> def = tmp;
>>> }
>>>
>>> + virNWFilterReadLockFilterUpdates();
>>> +
>>
>> So no other locks up to this point are taken? And no need perhaps to
>> lock earlier to play follow the leader (eg, the original commit) where
>> the lock was taken after the various flags checks.
>>
>>> if (!(vm = virDomainObjListAdd(driver->domains, def,
>>> driver->xmlopt,
>>> VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
>>> @@ -5978,6 +5980,7 @@ qemuDomainRestoreFlags(virConnectPtr conn,
>>> virFileWrapperFdFree(wrapperFd);
>>> if (vm)
>>> virObjectUnlock(vm);
>>> + virNWFilterUnlockFilterUpdates();
>>
>> So this could get called without ever having set the lock - is that
>> correct? We can get to cleanup without calling the ReadLock - probably
>> not a good thing since it's indeterminate what happens according to the
>> man page.
>>
>>> return ret;
>>> }
>>>
>>> @@ -7502,6 +7505,8 @@ static int qemuDomainAttachDeviceFlags(virDomainPtr dom, const char *xml,
>>>
>>> affect = flags & (VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG);
>>>
>>> + virNWFilterReadLockFilterUpdates();
>>> +
>>
>> [1] This one is done after the GetConfig
>>
>>> if (!(caps = virQEMUDriverGetCapabilities(driver, false)))
>>> goto cleanup;
>>>
>>> @@ -7614,6 +7619,7 @@ static int qemuDomainAttachDeviceFlags(virDomainPtr dom, const char *xml,
>>> virObjectUnlock(vm);
>>> virObjectUnref(caps);
>>> virObjectUnref(cfg);
>>
>> [1] But the release is done after the cfg unref
>>
>>> + virNWFilterUnlockFilterUpdates();
>>
>>> return ret;
>>> }
>>>
>>> @@ -7644,6 +7650,8 @@ static int qemuDomainUpdateDeviceFlags(virDomainPtr dom,
>>> VIR_DOMAIN_AFFECT_CONFIG |
>>> VIR_DOMAIN_DEVICE_MODIFY_FORCE, -1);
>>>
>>> + virNWFilterReadLockFilterUpdates();
>>> +
>>
>> [1] This one is done before the GetConfig
>>
>>> cfg = virQEMUDriverGetConfig(driver);
>>>
>>> affect = flags & (VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG);
>>> @@ -7760,6 +7768,7 @@ static int qemuDomainUpdateDeviceFlags(virDomainPtr dom,
>>> virObjectUnlock(vm);
>>> virObjectUnref(caps);
>>> virObjectUnref(cfg);
>>> + virNWFilterUnlockFilterUpdates();
>>
>> [1] Release done after cfg unref
>>
>>> return ret;
>>> }
>>>
>>> @@ -14510,6 +14519,8 @@ qemuDomainRevertToSnapshot(virDomainSnapshotPtr snapshot,
>>> * and use of FORCE can cause multiple transitions.
>>> */
>>>
>>> + virNWFilterReadLockFilterUpdates();
>>> +
>>
>> [1] This one is done before GetConfig
>>
>>> if (!(vm = qemuDomObjFromSnapshot(snapshot)))
>>> return -1;
>>>
>>> @@ -14831,6 +14842,7 @@ qemuDomainRevertToSnapshot(virDomainSnapshotPtr snapshot,
>>> virObjectUnlock(vm);
>>> virObjectUnref(caps);
>>> virObjectUnref(cfg);
>>> + virNWFilterUnlockFilterUpdates();
>>
>> [1] Release done after cfg unref
>>
>>>
>>> return ret;
>>> }
>>> diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
>>> index 94a4cf6..18242ae 100644
>>> --- a/src/qemu/qemu_migration.c
>>> +++ b/src/qemu/qemu_migration.c
>>> @@ -2666,6 +2666,8 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver,
>>> goto cleanup;
>>> }
>>>
>>> + virNWFilterReadLockFilterUpdates();
>>> +
>>
>> Lots of code before we get here - what's the locking
>>
>>> if (!(vm = virDomainObjListAdd(driver->domains, *def,
>>> driver->xmlopt,
>>> VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
>>> @@ -2825,6 +2827,7 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver,
>>> qemuDomainEventQueue(driver, event);
>>> qemuMigrationCookieFree(mig);
>>> virObjectUnref(caps);
>>> + virNWFilterUnlockFilterUpdates();
>>
>> Yet another case where we could reach the cleanup without having ever
>> obtained the ReadLock
>>
>>> return ret;
>>>
>>> stop:
>>> diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
>>> index 26d4948..409a672 100644
>>> --- a/src/qemu/qemu_process.c
>>> +++ b/src/qemu/qemu_process.c
>>
>> This one seems OK - although I think I'd make it a separate patch and of
>> course explain the lock ordering change
>>
>>
>> John
>>> @@ -3422,6 +3422,8 @@ qemuProcessReconnect(void *opaque)
>>>
>>> VIR_FREE(data);
>>>
>>> + virNWFilterReadLockFilterUpdates();
>>> +
>>> virObjectLock(obj);
>>>
>>> cfg = virQEMUDriverGetConfig(driver);
>>> @@ -3573,6 +3575,7 @@ qemuProcessReconnect(void *opaque)
>>>
>>> virObjectUnref(conn);
>>> virObjectUnref(cfg);
>>> + virNWFilterUnlockFilterUpdates();
>>>
>>> return;
>>>
>>> @@ -3608,6 +3611,7 @@ qemuProcessReconnect(void *opaque)
>>> }
>>> virObjectUnref(conn);
>>> virObjectUnref(cfg);
>>> + virNWFilterUnlockFilterUpdates();
>>> }
>>>
>>> static int
>>>
>
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list