I have, in the past, replaced “loader”
in the initrd with a newer version when we needed newer drivers but wanted to
keep our existing kickstart tree. I would guess that you probably couldn’t
use the loader from RHEL 5 in a RHEL 4 initrd, but I guess you could try.
From:
kickstart-list-bounces@xxxxxxxxxx [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Al Alder
Sent: Friday, March 13, 2009 1:26
PM
To: Discussion
list about Kickstart
Subject: Re: USB devices not being
seen in anaconda during RHEL4 kickstart
Yep, I understand you
have to stay with 4.7.
In addition to Chip's solution, you might want to
use the 5.3 initrd image on your USB stick and
you would have to modify the 5.3 initrd image to
specify your kickstart image instead of the 5.3 one.
Just something you might want to consider if you
have problems with Chip's solution.
Whatever you do that works, please post what you
did.
On Fri, Mar 13, 2009 at 1:55 PM, Ben <bda20@xxxxxxxxx> wrote:
On Fri, 13 Mar 2009, Al
Alder wrote:
Had a very similar problem with some HP servers and RHEL 4. RHEL
4 did not recognize the disk controller in the newer HP machines. Our
solution was to go to RHEL 4.6 which had the driver for the newer disk
controllers. So you are running into a similar problem with your USB stick.
RHEL5.3 works because its initrd image has the driver for the USB.
You can
1) rebuild your initrd image with the USB driver
2) just use RHEL 5.3
I investigated number 1, but couldn't find any documentation that explained how
to that for the initial install boot initrd. Am sure I could have
monkeyed with it and gotten it to work if I had had the time.
I'm not sure I want to get into rolling my own special initrd, but needs must
and all that.
We went with our option 2 and had to upgrade everything to RHEL 4.6.
I can't use RHEL5.x I'm afraid. The software that goes on top of the OS
is currently only certified for RHEL4. And as it is I'm using RHEL4
update 7, so theoretically I've got the most up-to-date support for devices
that the RHEL4 stream offers.
I wonder what's different about this USB controller Vs all USB controllers
before it...
My current plan on Monday is to try Chip Shabazian's suggestion of wrapping the
ks.cfg up in the initrd.img and seeing if that works. I'm still listening
out for suggestions and experience of other people with RHEL4 and Sun x4X40
servers. In case it matters x4100M2, x4200M2 and x4600M2 servers work
perfectly well with USB kickstarted RHEL4 (-:
Ben
--
Unix Support, MISD, University of
Cambridge, England
Plugger of wire, typer of keyboard, imparter of Clue
Life Is Short.
It's All Good.
_______________________________________________
Kickstart-list mailing list
Kickstart-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/kickstart-list
--
Later,
Al Alder
