Hello! My Dom0 has the ip address 10.1.121.201/24 and is not connected to the network, because I do not want to be able to reach DHCP server as I will not have one in the production network. When I try to install a guest with kickstart, it tries to reach a DHCP server. Off course the dhcp timed out. I set the ip address 10.1.121.210/24 manually and I can see these messages in the console: DHCPv4 eth0 - TIMED OUT ethe0 is not a wireless adapter file location:fpt://10.1.121.201/guest.cfg trasnferring fpt://10.1.121.201/guest.cfg to a fd setting up kickstart results of url ks, url ftp:/10.1.121.201// setting language to en_US.UTF-8 need to set up networking going to pick interface going to do getNetConfig dnsservers is 10.1.3.1 ethe0 is not a wireless adapter It starts DHCPDISCOVER again. I can ping the muanually configured IP. Kickstart is configured to setup an static ip address to the guest, 10.1.121.202/24. network --device eth0 --bootproto static --ip 10.1.121.202 --netmask 255.255.255.0 --gateway 10.1.121.254 --nameserver 10.1.3.1 Any suggestion? Thanks in advance. Regards, -- Augusto Castelan Carlson _______________________________________________ Kickstart-list mailing list Kickstart-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/kickstart-list