Why do you create so much physical volumes instead of creating just one and several LV on it? ¿Why so much VG too? Regards Pablo El jue, 22-11-2007 a las 17:30 +0100, Rainer Duffner escribió: > Am Do, 22.11.2007, 16:54, schrieb Jan Wildeboer: > > On Thu, 2007-11-22 at 17:03 +0100, Rainer Duffner wrote: > > > >> Oh, I forgot to mention. > >> I use Workstation 6.0.2 build 59824 > > > > Any error messages on the VMWare level? > > Not really. > > Nov 22 15:20:41.598: vcpu-0| CPU reset: soft > Nov 22 15:20:41.749: vcpu-0| SVGA: Unregistering IOSpace at 0x1060 > Nov 22 15:20:41.750: vcpu-0| SVGA: Unregistering MemSpace at > 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) > Nov 22 15:20:41.871: vcpu-0| SVGA: Registering MemSpace at > 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) > Nov 22 15:20:41.882: vcpu-0| SVGA: Unregistering MemSpace at > 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) > Nov 22 15:20:41.921: vcpu-0| SVGA: Registering MemSpace at > 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) > Nov 22 15:20:41.935: vcpu-0| SVGA: Unregistering MemSpace at > 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) > Nov 22 15:20:41.938: vcpu-0| SVGA: Registering IOSpace at 0x1060 > Nov 22 15:20:41.938: vcpu-0| SVGA: Registering MemSpace at > 0xf0000000(0xf0000000) and 0xe8000000(0xe8000000) > Nov 22 15:20:42.072: mks| Ignoring update request in VGA_Expose (mode > change pending). > Nov 22 15:20:42.072: mks| Ignoring update request in VGA_Expose (mode > change pending). > Nov 22 15:20:42.200: vcpu-0| DISKUTIL: scsi0:0 : geometry=4699/255/63 > Nov 22 15:20:42.282: vcpu-0| BIOS-UUID is 56 4d c3 8c 59 de 63 5a-07 8a cc > e3 9a 64 e1 f2 > Nov 22 15:20:42.453: vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 0 > Nov 22 15:20:42.454: vcpu-0| DISKUTIL: Offline toolsVersion = 0 > Nov 22 15:20:50.129: mks| Ignoring update request in VGA_Expose (mode > change pending). > Nov 22 15:20:50.132: mks| Ignoring update request in VGA_Expose (mode > change pending). > Nov 22 15:20:51.720: mks| Ignoring update request in VGA_Expose (mode > change pending). > Nov 22 15:20:51.720: mks| Ignoring update request in VGA_Expose (mode > change pending). > Nov 22 15:20:59.928: vcpu-0| SVGA: Unregistering IOSpace at 0x1060 > Nov 22 15:20:59.928: vcpu-0| SVGA: Registering IOSpace at 0xfffffff0 > Nov 22 15:20:59.928: vcpu-0| SVGA: Unregistering IOSpace at 0xfffffff0 > Nov 22 15:20:59.928: vcpu-0| SVGA: Registering IOSpace at 0x1060 > Nov 22 15:21:08.795: vcpu-0| SCSI0: RESET BUS > Nov 22 15:21:08.808: vcpu-0| SCSI DEVICE (scsi0:0): MODE SENSE(6) for > unsupported page 0 > Nov 22 15:21:08.808: vcpu-0| SCSI DEVICE (scsi0:0): MODE SENSE(6) for > unsupported page 0x8 > Nov 22 15:21:08.809: vcpu-0| SCSI DEVICE (scsi0:0): MODE SENSE(6) for > unsupported page 0 > Nov 22 15:21:08.810: vcpu-0| SCSI DEVICE (scsi0:0): MODE SENSE(6) for > unsupported page 0x8 > Nov 22 15:22:12.674: vcpu-0| VLANCE: Ethernet1 skipped 2304 time(s) > Nov 22 15:22:12.674: vcpu-0| VLANCE: 981 549 534 56 48 23 34 34 20 12 8 4 > 0 0 0 1 > Nov 22 15:22:12.674: vcpu-0| VLANCE: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > Nov 22 15:22:12.749: vcpu-0| VLANCE: Ethernet1 skipped 2560 time(s) > Nov 22 15:22:12.749: vcpu-0| VLANCE: 1075 614 587 68 59 29 41 38 22 13 9 4 > 0 0 0 1 > Nov 22 15:22:12.749: vcpu-0| VLANCE: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > Nov 22 15:22:12.825: vcpu-0| VLANCE: Ethernet1 skipped 2816 time(s) > Nov 22 15:22:12.825: vcpu-0| VLANCE: 1164 668 655 82 71 36 47 41 22 15 9 4 > 1 0 0 1 > Nov 22 15:22:12.825: vcpu-0| VLANCE: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > Nov 22 15:22:12.895: vcpu-0| VLANCE: Ethernet1 skipped 3072 time(s) > Nov 22 15:22:12.896: vcpu-0| VLANCE: 1253 741 731 93 73 39 48 42 22 15 9 4 > 1 0 0 1 > Nov 22 15:22:12.896: vcpu-0| VLANCE: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > Nov 22 15:22:12.968: vcpu-0| VLANCE: Ethernet1 skipped 3328 time(s) > Nov 22 15:22:12.968: vcpu-0| VLANCE: 1346 806 800 104 78 43 53 42 25 16 9 > 4 1 0 0 1 > Nov 22 15:22:12.968: vcpu-0| VLANCE: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > Nov 22 15:22:29.347: vcpu-0| FLOPPY-MAIN : CMD Checking status for > non-existent Drive 0 > Nov 22 15:22:29.393: vcpu-0| SCSI DEVICE (scsi0:0): INQUIRY request with > EVPD set > Nov 22 15:22:29.393: vcpu-0| SCSI DEVICE (scsi0:0): INQUIRY request with > EVPD set > Nov 22 15:22:35.030: vcpu-0| FLOPPY-MAIN : CMD Checking status for > non-existent Drive 0 > > > I can send the whole ks.cfg file, if it is of any use. > We have been doing kickstart installs with RHEL4 for some time (with > LVMs), but my co-worker tells me that the syntax he used with RHEL4 has > stopped working with RHEL5. > > [root@vmrhel5 syslog]# cat > /var/www/cobbler/kickstarts_sys/rhel5-test-client/ks.cfg > > #platform=x86, AMD64, or Intel EM64T > # System authorization information > auth --useshadow --enablemd5 > # System bootloader configuration > bootloader --location=mbr > # Partition clearing information > clearpart --all --initlabel --drives=sda > # Use text mode install > text > key --skip > # Firewall configuration > firewall --enabled > # Run the Setup Agent on first boot > firstboot --disable > # System keyboard > keyboard us > # System language > lang en_US > # Use network installation > url --url=http://172.16.50.100/cblr/links/RHEL5-i386 > # If any cobbler repo definitions were referenced in the kickstart > profile, include them here. > # Network information > network --bootproto=static --device=eth0 --onboot=on --ip=172.16.50.56 > --netmask=255.255.255.0 --gateway=172.16.50.2 --nameserver=172.16.50.2 > # Reboot after installation > reboot > > #Root password > rootpw --iscrypted $1$yadayadayadayadayadayada. > # SELinux configuration > selinux --disabled > # Do not configure the X Window System > skipx > # System timezone > timezone --utc Europe/Zurich > > # Install OS instead of upgrade > install > # Clear the Master Boot Record > zerombr > > # Magically figure out how to partition this thing > #SNIPPET::partition_select_normal > # or not > part /boot --fstype ext3 --size=150 --ondisk=sda --asprimary > part swap --fstype swap --size=4096 --ondisk=sda --asprimary > > part pv.01 --size=2048 --ondisk=sda --asprimary > volgroup rootvol pv.01 --pesize=32768 > logvol / --vgname=rootvol --size=1024 --name=root --grow --fstype=ext3 > > part pv.02 --size=4096 --ondisk=sda > volgroup usrvol pv.02 --pesize=32768 > logvol /usr --vgname=usrvol --size=1024 --name=usr --grow --fstype=ext3 > > part pv.03 --size=2048 --grow --ondisk=sda > volgroup varvol pv.03 --pesize=32768 > logvol /var --vgname=varvol --size=1024 --name=var --grow --fstype=ext3 > > part pv.04 --size=4096 --ondisk=sda > volgroup varlogvol pv.04 --pesize=32768 > logvol /var/log --vgname=varlogvol --size=1024 --name=varlog --grow > --fstype=ext3 > > > %packages > #-s390utils > #-bluez-bluefw > #-bluez-hcidump > > #-bluez-libs > #-bluez-utils > > #-bluez-gnome > #-bridge-utils > #-dhclient > #-dhcpv6_client > > #-irda-utils > #-pcmciautils > #-rp-pppoe > #-sendmail > #-mutt > #-fetchmail > #-mdadm > > #-wireless-tools > #-rhpl > #-NetworkManager > > #lvm2 > #grub > #e2fsprogs > #compat-libstdc++-296 > #compat-libstdc++-33 > #elinks > #ntp > #postfix > #vim-common > #vim-enhanced > > > %post > > wget http://172.16.50.100/cblr/watcher.py?system_done=rhel5-test-client -b > wget http://172.16.50.100/cobbler/kickstarts_sys/rhel5-test-client/ks.cfg > -O /root/cobbler.ks > > %pre > #!/bin/sh > echo "Running LVM scan..." > /usr/sbin/lvm.static vgscan > /usr/sbin/lvm.static vgchange -ay > /usr/bin/sleep 5 > echo "...done!" > > > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/kickstart-list -- Pablo Iranzo Gómez (Pablo.Iranzo@xxxxxxxxxx) RHCE/Global Profesional Services Consultant Spain Phone: +34 645 01 01 49 (CET/CEST) GnuPG KeyID: 0xFAD3CF0D -- Inscrita en el Reg. Mercantil de Madrid – C.I.F. B-82 65 79 41 Directores: Michael Cunningham, Charlie Peters y David Owens Dirección Registrada: Red Hat S.L., C/ Velazquez 63, Madrid 28001, España Dirección contacto: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, Planta 3ºD, 28016 Madrid, Spain
Attachment:
signature.asc
Description: Esta parte del mensaje =?ISO-8859-1?Q?est=E1?= firmada digitalmente
_______________________________________________ Kickstart-list mailing list Kickstart-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/kickstart-list
