Try changing 'ksdevice=eth0' to 'ksdevice=link'. With 2.6 kernels, the kernel's idea of what eth0 and eth1 are often differs from the BIOS/PXE stack. CC > -----Original Message----- > From: kickstart-list-bounces@xxxxxxxxxx > [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Mukarram Syed > Sent: Wednesday, 16 May 2007 8:42 AM > To: 'Discussion list about Kickstart' > Subject: RE: Unable to get any http requests: > Unabletoretreive netstg2.imgfile > > John, > Sorry...just to make things clear. > eth0 works to get the dhcp/tftp request and eth1 does not. > However, I tried using both is what I meant. > > We have a problem with dhcp, the networking folks here did > not enable "spanning tree" on the switch ports, until that > happens I am using static > ip. I double checked the syntax etc. > > Thanks > -Mukarram. > > -----Original Message----- > From: kickstart-list-bounces@xxxxxxxxxx > [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of John > Summerfield > Sent: Tuesday, May 15, 2007 5:32 PM > To: Discussion list about Kickstart > Subject: Re: Unable to get any http requests: Unable > toretreive netstg2.imgfile > > Mukarram Syed wrote: > > Thanks Colin for the quick response > > > > > > > > Yes. It does have. It's a Dell PE2950. > > > > > > > > I have already tried that option as well. > > > > I tried both ksdevice=eth0 and ksdevice=eth1 and they don't work. > > > > If you can connect all network interfaces, that might help, > because it then doesn't matter whether either one or both is used. > > If you run arpwatch that will report on which interfaces are > used (by mac address and IP). > > More below... > > > > > > > -Mukarram. > > > > > > > > > > > > _____ > > > > From: kickstart-list-bounces@xxxxxxxxxx > > [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of > Coe, Colin C. > (Unix > > Engineer) > > Sent: Tuesday, May 15, 2007 4:52 PM > > To: Discussion list about Kickstart > > Subject: RE: Unable to get any http requests: Unable to retreive > > netstg2.imgfile > > > > > > > > Does the machine you're on have multiple Ethernet > interfaces? If so, > > what you may find is adding 'ksdevice=link' will assist. > > > > > > > > CC > > > > > > > > > > _____ > > > > > > From: kickstart-list-bounces@xxxxxxxxxx > > [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of > Mukarram Syed > > Sent: Wednesday, 16 May 2007 7:50 AM > > To: kickstart-list@xxxxxxxxxx > > Subject: Unable to get any http requests: Unable to retreive > > netstg2.img file > > > > Hi > > > > I am sure there is some information regarding my request, but I am > > unable > to > > find it, hence the post. > > > > > > > > I configured my kickstart server using http. > > > > I am able to pxeboot the client, but my client is not able > to get the > > netstg2.img file from the server. > > > > I am able to http into my netstg2.img directory from a web browser > > from another server in the same subnet successfully. > > > > > > > > Also I tried to put in a boot cdrom and run the following: > > > > Linux ks=http://<ServerIP>/ENT_LINUX_64/Enterprise/ks.cfg > > ip=<ClientIP> > > netmask=255.255.255.224 gateway=<GatewayIP> > > > I have never used static IP for ks, I alway configure > everything I can with dhcp. However, I do know that that's > not the format the kernel expects for the ip parameter. Check > your documentation, if I were writing a script tp parse ip= > then I'd conform to the existing standards (that is, the way > the kernel expects it), and that's what works with Ubuntu. > > > > > > > > > > > Still no luck. It goes straight to the cd installer. > > > > > > > > I tried to tcpdump the traffic on the MAC address of the client, it > outputs > > the tftp information and after that it stops. > > > > I don't see any http traffic coming from the client. > > That's fairly consistent with you specifying ip= incorrectly. > > btw, if you're using PXE, the why are you trying to spectify > static IP info? > > btw, as I recall, pxelinux has an option to pass on the IP > address info it gets in the proper format for the kernel to parse. > > > > > > > > > > I'd appreciate some help in this regard. > > > > I've spent all day trying to troubleshoot this but no luck. > > > > > > > > Thanks Much > > > > > > > > > > > > Mukarram Syed > > > > Unix Systems Administrator, > > > > Stanford University. > > > > > > > > > > NOTICE: This email and any attachments are confidential. > > They may contain legally privileged information or > > copyright material. You must not read, copy, use or > > disclose them without authorisation. If you are not an > > intended recipient, please contact us at once by return > > email and then delete both messages and all attachments. > > > > > > > > > -------------------------------------------------------------- > ---------- > > > > _______________________________________________ > > Kickstart-list mailing list > > Kickstart-list@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/kickstart-list > > > -- > > Cheers > John > > -- spambait > 1aaaaaaa@xxxxxxxxxxxxxxxx Z1aaaaaaa@xxxxxxxxxxxxxxxx > > Please do not reply off-list > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/kickstart-list > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/kickstart-list > NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
