RE: Install to local drive instead of a fibre attached SAN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



That helped.  I didn't have the terms to search for.  There's a boot option "nostorage" that will skip disk drivers.  You then put "device scsi qla2300" to load only Qlogic as "/dev/sda" or "device scsi qla2300:mptscsih" to load both Qlogic and mptbase cards.  I do NOT find that this method allows you to specify Qlogic as "/dev/sdb" or "/dev/sda" in a two-controller list.

I also stumbled across a native kickstart boot option "latefcload", which loads fibre channel drivers last among all scsi modules.  This is a good basic way to install the OS on local drives without having to worry about nuking an attached SAN volume.

Thanks, Stephen.

-j

-----Original Message-----
From: kickstart-list-bounces@xxxxxxxxxx [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Stephen Mah
Sent: Friday, March 23, 2007 12:15 PM
To: Discussion list about Kickstart
Subject: Re: Install to local drive instead of a fibre attached SAN

I did a quick google. Try passing "nostorage"

http://archives.devshed.com/forums/linux-97/ignoring-san-devices-during-kickstart-1499210.html

Beamon, John wrote:
> We've had a few isolated incidents of kickstart installs assigning "/dev/sda" to a fibre attached SAN volume instead of the internal scsi disks.  My environment is RHEL 4U4 on mixed 32- and 64-bit Intel hardware.  Is there a way to script in %pre the exclusion of drives attached by an HBA?  I've rewritten /tmp/modprobe.conf with "scsi_hostadapterN qla2300" as both first and last entry in the scsi hosts, but the lettering of the drive doesn't change.  It appears to be set by the kernel image during boot.  Can that be re-ordered?  The closest thing I've found is that I can 'rmmod qla2300' in %pre, but the better long-term plan would be to configure internal or external by choice so we have the option of installing to the SAN later.
>
> -j
>
>   


_______________________________________________
Kickstart-list mailing list
Kickstart-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/kickstart-list

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.413 / Virus Database: 268.18.17/730 - Release Date: 3/22/2007
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.413 / Virus Database: 268.18.17/730 - Release Date: 3/22/2007
 


[Index of Archives]     [Red Hat General]     [CentOS Users]     [Fedora Users]     [Fedora Maintainers]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]

  Powered by Linux