On Thu, Jan 11, 2007 at 01:42:28PM -0700, Harner Keith-FKH006 wrote: > > Sure, > > I get: > *ASSERT: no network device in choosenetworkinterface > *Unable to bring up network > > So even though the host will PXE load a kernel it still cannot get to a > network resource? Oooh. Well, looks like there is no built-in driver support for your network cards. :) You'll need a driver disk for that as well likely. You may need to modify your installation CD in order to include this driver as there's no way to access it across the network without the NIC's working :D That or actually provide a physical driver disk, but that kind of negates the benefits of a hands-off Kickstart install. > My goal is to eliminate the need for a driver disk at boot time as we > run XCat and routinely have users reboot to upgrade their workstations. > > Thanks, > > Keith Harner > Engineering Compute > Phone: 480-413-8625 > Pager: 7393862@xxxxxxxxxx > > > > > -----Original Message----- > From: kickstart-list-bounces@xxxxxxxxxx > [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Ray Van Dolson > Sent: Wednesday, January 10, 2007 5:06 PM > To: Discussion list about Kickstart > Subject: Re: the driverdisk option in the .cfg file > > On Wed, Jan 10, 2007 at 05:05:23PM -0700, Harner Keith-FKH006 wrote: > > I recently received some new Sun Ultra 20 m2 workstations. > > Our current supported release RHEL3 update 7 does not contain drivers > > for this new hardware. > > > > I attempted to utilize the driverdisk option in the .cfg file and > > point to an NFS exported directory containing all of the needed > drivers. > > > > driverdisk --source=nfs:host_ip:path_to_drivers > > > > For some reason it cannot seem to find the drivers although the path > > is valid and any host can mount it. > > > > What am I missing? > > Keith, are you seeing any error messages in any of the console screens > you could share with us? > > Ray
