I got this from the list a while back and has been working for me with Enterprise 3. You could probably narrow down the devices, but this just makes sure it hits everything. hopefully its useful, marc --- %post --nochroot mkdir /mnt/hda mkdir /mnt/hdb mkdir /mnt/hdc mkdir /mnt/hdd mknod /dev/hda b 3 0 mknod /dev/hdb b 3 64 mknod /dev/hdc b 22 0 mknod /dev/hdd b 22 64 echo '/dev/hda /mnt/hda iso9660,ro 0 0' >> /etc/fstab echo '/dev/hdb /mnt/hdb iso9660,ro 0 0' >> /etc/fstab echo '/dev/hdc /mnt/hdc iso9660,ro 0 0' >> /etc/fstab echo '/dev/hdd /mnt/hdd iso9660,ro 0 0' >> /etc/fstab /mnt/sysimage/usr/bin/eject /dev/hda /mnt/sysimage/usr/bin/eject /dev/hdb /mnt/sysimage/usr/bin/eject /dev/hdc /mnt/sysimage/usr/bin/eject /dev/hdd > -----Original Message----- > From: Mattias Andersson > Sent: Friday, February 17, 2006 11:14 AM > To: kickstart-list@xxxxxxxxxx > Subject: Ejecting CD after kickstart installation > > Hi, > > I'm installing Fedora 3 on a lot of machines in our rendering > farm using a > kickstart installation. > The best would be if I could somehow get the kickstart to > eject the cd > straight after it has finished the first phase, i.e. before the first > reboot. Cause then I don't need to connect a monitor and > keyboard to the > machine, all I need to do is to put the first installation CD > and let it > install via NFS and eventually it would just be done. > The network path and such information for the installation is > provided via > DHCP and the installation CD has been slightly modified to > boot straight in > to the kickstart-mode. > > Has anyone been succesful in doing this? > > Any suggestions would be very much apprecieated. > > Mattias
