Hello all, I'm trying to create a recovery scenario where, upon recovery request, an image is loaded from a server to the system via nfs. My attempt so far was to do a minimum kickstart installation, basically installing nothing, but rather "waiting" for the %post section. But from the beginng: >From the system to be recovered, I took an image with dd and transferred it over to the server, compressing it there: dd if=/dev/hda | gzip -c /nfsmount/host2-hda.gz On recovery, the post section is supposed to overwrite the whole HD with this particular image again: [...] #Firewall configuration firewall --disabled #Do not configure XWindows skipx #Package install information %packages --resolvedeps %post mkdir /mnt/server mount -t nfs 192.168.2.254:/backup/images /mnt/vitels gunzip -c /mnt/vitels/host2-hda.gz | dd of=/dev/hda And this aint working at all. Any ideas why? Below is the rest of the ks.cfg I'm also open to suggestions on how else I can resolve this. I didn't find any documentation about the rescue option. Could that be a possibility? Can you point me to some docs? Thank you so much! Uwe #System language lang en_US #Language modules to install langsupport en_US #System keyboard keyboard de-latin1 #System mouse mouse genericwheelps/2 #Sytem timezone timezone America/New_York #Root password rootpw --iscrypted $1$LBYw4gs2$kV4hSBc22FQDabrINN5sn/ #Reboot after installation reboot #Install OS instead of upgrade install #Use Web installation url --url http://192.168.2.254/fedora/4 #System bootloader configuration bootloader --location=mbr #Clear the Master Boot Record zerombr yes #Partition clearing information clearpart --all --initlabel #Disk partitioning information part /boot --fstype ext3 --size 100 part / --fstype ext3 --size 1 --grow part swap --size 1020 #System authorization infomation auth --useshadow --enablemd5 #Network information network --bootproto=dhcp --device=eth0 network --bootproto=static --ip=10.0.2.1 --netmask=255.255.255.0 --gat eway=10.0. 2.254 --nameserver=10.0.2.254 --device=eth1 #Firewall configuration firewall --disabled #Do not configure XWindows skipx #Package install information %packages --resolvedeps %post