I tried unsuccessfully to install FC3 this last weekend using initially a kickstart file that I had created and then resorting to using the graphical interface to attempt a manual install and answering all the questions when prompted. I was using a USB flash drive as the location for the kickstart file and half way through the install, I'd get the following error: SystemError: (16, 'Device or resource busy') together with a whole lot of other call trace lines and my config options. I initially though that the USB system might be the problem and transferred the kickstart file to a floppy. I don't recall if the error was the same, but half way thought the install it too spat the dummy. I then attempted the manual graphical way selecting to install a 'minimum' system. This install too would get about halfway and stop, one of the errors given was: RuntimeError: /usr/sbin/kudzu can not be run I did some searching and it turned up quite a few hits of people who had a problem install FC3 on a box that used an Asus P4T mother board. One solution was to update the bios to the latest version which I did but it made no difference. Has anyone here had any problem with using an Asus P4T and if so, was it every solved and how? I have downloaded RH9 and will try that again when I get a chance. I've had Mandrake 9 running and have even built Linux from scratch without any problems, so the hardware should be good. System: Mother board: Asus P4T Ram: 512MB RDRAM CPU Pentium 1.3GHz HDD Two 160GB IDE drives I'd really appreciate any help I can get to solve this problem. Thanks Gavin Jackson ------------------------------------------- Research & Development Software Engineer Tru-Test Ltd PO Box 51078, Pakuranga Auckland, New Zealand DDI +64 9 978 8757 -------------------------------------------
