Installing only bare minimum system, to act as gateway and proxy server. All the partitions are correctly formatted. I am using stripped down, buildinstall which only updates, initrd.img and not the other files. Since building stage2.img using buildinstall, requires lot of other packages to be in the install tree, for X and others, which i dont' want to include, as it is for proxy server and very small image. And what kind of drivers ??? On Tue, 08 Feb 2005 10:16:05 -0600, Peter Eisch <peter@xxxxxxxx> wrote: > > You probably don't have drivers for that particular kernel that you are now > booting from in the stage2.img. Whatever you did to update the boot > initrd.img, also do to the stage2.img. > > peter > > On 2/8/05 6:18 AM, "Jaswinder Singh Kohli" <jskohli@xxxxxxxxx> wrote: > > > Hi, > > > > I am getting this error while installation, using the ks.cfg which > > partitions the drive into > > three partitions, / = 1 G > > swap = 1 G > > /var = rest of space ( 30 + G) > > > > The cd image that i built had modified stage2.img, ( took care of .buildstamp) > > bootdisks upgraded to kernel 2.6.10..., > > Only Modified isolinux/initrd.img is used, rest of the files like, > > stage2.img and hdstg2.img > > are just repackaged version of what were on Original FC3 Iso's, only > > changed .buildstamp > > > > Now when i booot that CD, the boots up, detects hardware, anaconda starts X > > The partitions are created and formatted, but then the Install ends > > with a message. > > > > "An error occured while transfering install image to your harddrive . > > You are probably > > out of disk space" > > > > Where as when i perform fdisk -l on tty2, which shows, all the > > partitions were created > > and also on console 6 the formatting was successful and hence lot of > > space is there. > > > > On tty3, the detailed error message is as follows... > > > > Error transfering stage2.img: [Errno 2] No such file of directory: > > '/mnt/sysimage/proc/rhinstall-stage2.img' > > > > I did a search on google, and archives, came up with no results. > > > > Can any one tell me what i am missing or doing wrong and why it is > > trying to copy > > rhinstall-stage2.img from some proc fs instead of stage2.img from CD. > > > > I am stuck at this point for too long now, any Pointers, any ideas, > > will be helpful, that can > > get me going in forward direction. > > > > Thanks.... > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/kickstart-list > -- Regards JSK jskohli (AT) gmail (DOT) com
