I'm not sure what your scope is, but maybe this helps...
I had an issue where I needed to forceload drivers where I knew the PCI info
was up to date for the devices we were loading on, so I forceloaded the
drivers in the initrd.img just as the kernel was being installed. This, of
course, had to be done manually on the install cd's initrd. But for the
various kernels I ended up with something like this in the spec files for
each platform:
%post bigmem
[ -x /usr/sbin/module_upgrade ] && /usr/sbin/module_upgrade
[ -x /sbin/mkkerneldoth ] && /sbin/mkkerneldoth
if [ -x /sbin/new-kernel-pkg ] ; then
/sbin/new-kernel-pkg --mkinitrd --depmod --install %{KVERREL}bigmem
fi
/sbin/mkinitrd --preload scsi_mod --preload sd_mod --with cciss \
/boot/ninitrd-%{KVERREL}bigmem.img %{KVERREL}bigmem
/bin/mv /boot/initrd-%{KVERREL}bigmem.img /boot/oinitrd-%{KVERREL}bigmem.img
/bin/mv /boot/ninitrd-%{KVERREL}bigmem.img /boot/initrd-%{KVERREL}bigmem.img
Maybe do the --preloads in the order you need them loaded. Hope this helps,
peter
On 2/7/05 2:31 PM, "Ronald Reed" <rreed@xxxxxxxxxxxxxxx> wrote:
> I really don't want to rewrite anaconda, just to get one scsi module to
> load before another one.
>
> I have tried the scsihosts= boot option, but the installer just seems to
> ignore it. I have also tried the expert noprobe boot options with device
> commands in the kickstart config file (Which worked in 7.1 - 7.3), and
> the system can not find any drives at that point.
>
> What I need to do, is make sure that the aacraid driver is setup as
> /dev/sda and that the megaraid driver is setup as /dev/sdb during the
> install.
>
> On Thu, 2005-02-03 at 22:40, johnpaul wrote:
>> Hi
>>
>> Have a look at the loader.c file in the loader2 directory of the
>> anaconda source
>>
>> Regards
>> John
>> ----- Original Message -----
>> From: "Ronald Reed" <rreed@xxxxxxxxxxxxxxx>
>> To: "Discussion list about Kickstart" <kickstart-list@xxxxxxxxxx>
>> Sent: Thursday, February 03, 2005 10:49 PM
>> Subject: initrd.img module loading
>>
>>
>>> Where does the standard initrd.img get the order to load modules into
>>> the kernel?
>>>
>>> I need to create a new initrd for a boot that loads some scsi raid
>>> modules in a specific order.
>>> --
>>> ===========================
>>> Ron Reed
>>> RedHat Certified Engineer
>>> SGP Computer Department Manager
>>> Unix Systems Administrator
>>> ARM SGP CART Site
>>> (580)388-4053
>>> ron.reed@xxxxxxx
>>>
>>> _______________________________________________
>>> Kickstart-list mailing list
>>> Kickstart-list@xxxxxxxxxx
>>> https://www.redhat.com/mailman/listinfo/kickstart-list
>>
>> _______________________________________________
>> Kickstart-list mailing list
>> Kickstart-list@xxxxxxxxxx
>> https://www.redhat.com/mailman/listinfo/kickstart-list
