Thanks a lot Greg ! I will try what you told me
tomorrow night !
Really apreciate your help !
Regards.
--- Greg Morgan <drkludge@xxxxxxx> escribió:
> Edgar,
>
> I was bored tonight so I thought I would fool around
> with your issue. If
> you are planning to make changes to the CD set, then
> you will want to go
> through and perform all the steps as described in
> the documentation.
> The following steps bypass much of the
> documentation.
>
> I tried the steps on a real FC2 cd that I installed
> from. I received
> the following errors. They appear to be fatal to
> me:
> cp: reading `/mnt/cdrom/Fedora/base/comps.rpm':
> Input/output error
> cp: reading `/mnt/cdrom/Fedora/base/hdlist':
> Input/output error
> cp: reading `/mnt/cdrom/Fedora/base/hdlist2':
> Input/output error
> Moreover, not all of the directories were copied
> from the cd into my
> working directory.
>
> Since I still had the ISO file that I used to create
> the CD with I tried
> these steps. They are a little different from the
> two sites listed
> below but have the same intent. You will have to
> adapt the file paths
> to your system. (The pathing is for a samba/NFS
> server.)
> # Switch to root
> su - root
> # Go to the ISO directory location.
> cd /home/ddrive/fedoracore2
> # Mount the ISO file.
> mount -t iso9660 -o loop FC2-i386-disc1.iso
> /mnt/cdrom
> #Make a set of working directories
> mkdir -p /home/fdrive/fc2iso
> mkdir -p /home/fdrive/fc2iso/i386
> # Copy the files from the CD/ISO.
> cp -a /mnt/cdrom/* /home/fdrive/fc2iso/i386
> cp /mnt/cdrom/.discinfo /home/fdrive/fc2iso/i386
> # Clean up the original cd TRANS.TBL files.
> find /home/fdrive/fc2iso -name TRANS.TBL -exec rm -f
> {} \;
> # Go to the location of disc 1 files.
> cd /home/fdrive/fc2iso/i386
> # Make sure the /home/fdrive/fc2iso/i386 directory
> has
> # the same files as the /mnt/cdrom directory .
> ls -l
> # Make sure that I create the iso file in the
> directory
> # above the directory containing the files in the
> iso.
> cd /home/fdrive/fc2iso
> # Create the iso. Note the \ has to be the last
> character
> # on the line. I did this for readability on my
> part.
> mkisofs -b isolinux/isolinux.bin \
> -c isolinux/boot.cat -J -p "chillux@xxxxxxxxxxxxx" \
> -V "Fedora Core 2 with updates disc1" \
> -r -T -v -A "Fedora Core Linux/i386 2" \
> -o fedoracore2-disc1.iso -no-emul-boot \
> -boot-load-size 4 -boot-info-table -l i386
>
> The final output showed:
> ...
> 99.18% done, estimate finish Wed Oct 13 21:52:39
> 2004
> Total translation table size: 131221
> Total rockridge attributes bytes: 54553
> Total directory bytes: 96256
> Path table size(bytes): 94
> Done with: The File(s) Block(s)
> 332482
> Writing: Ending Padblock Start Block
> 332589
> Done with: Ending Padblock Block(s) 150
> Max brk space used 8e000
> 332739 extents written (649 MB)
>
> # I am done with the mounted ISO file so unmount the
> file.
> umount /mnt/cdrom
>
> My version of mkisofs is 2.01a27.
>
> I hope this helps,
> Greg
>
> Edgar Chillón 'Chillux' wrote:
> > Sooo ? what do I have to do ? I copyed the disc 1
> > again and I have the same problem !!!!
> >
> > Any ideas ? or I will have to go back to fedora
> core 1
> > ?
> >
> > Regards.
> >
> > --- Edgar Chillón 'Chillux'
> <e_chillon@xxxxxxxxxxxx>
> > escribió:
> >
> >>I did it as the manual said:
> >>
> >>cp -R /mnt/cdrom/* /mnt/fedora-custom
> >>cp /mnt/cdrom/.discinfo /mnt/fedora-custom
> >>
> >>Then I tryed to create the iso but it send me that
> >>error. I thoungh it was a disk problem, I tryed in
> >>other disk and the problem is the same ... I don't
> >>know how to do, I've tryed to find some of this in
> >>google but I didnt find anything ...
> >>
> >>Please, some body help ..
> >>
> >>
> >> --- Greg Morgan <drkludge@xxxxxxx> escribió:
> >>
> >>>Edgar Chillón 'Chillux' wrote:
> >>>
> >>>>Can some body explain me what do I have this
> >>>
> >>>problem:
> >>>
> >>>Edgar
> >>>
> >>>The clue may be in this statement
> >>> > I am occuping the Fedora Core 2, I didnt
> change
> >>> > anything, I just simple copy the first disk
> and
> >>>try to
> >>> > make it iso but I didnt work ...
> >>>
> >>>How did you "copy" the first disk? When
> following
> >>>these instructions
> >>>
> >>
> >
>
http://rau.homedns.org/twiki/bin/view/Anaconda/PreparingTheBuildEnvironment,
> >
> >>>did you perform steps 1, 2, 3--just for CD ONE,
> >>
> >>and
> >>
> >>>7? I point this out
> >>>because of the segmentation fault during the
> >>>directory tree writing
> >>>step, "> Writing: Directory tree"
> >>>
> >>>
> >>>>[root@chillux fedora-custom]# mkisofs -b
> >>>>isolinux/isolinux.bin -c isolinux/boot.cat -J -p
> >>>>"chillux@xxxxxxxxxxxxx" -V "Fedora Core 2 with
> >>>>updates disc1" -r -T -v -A "Fedora Core
> >>
> >>Linux/i386
> >>
> >>>2"
> >>>
> >>>>-o fedoracore2-disc1.iso -no-emul-boot
> >>>
> >>>-boot-load-size
> >>>
> >>>>4 -boot-info-table -l i386
> >>>
> >>>Your mkisofs options look good based on
> >>>
> >>
> >
>
http://www.linuxworks.com.au/redhat-installer-howto.html#s8
> >
> >>>and
> >>>
> >>
> >
>
http://rau.homedns.org/twiki/bin/view/Anaconda/CustomizingFedoraCore.
> >
> >>>>INFO: UTF-8 character encoding detected by
> >>>
> >>>locale
> >>>
> >>>>settings.
> >>>> Assuming UTF-8 encoded filenames on
> >>
> >>source
> >>
> >>>>filesystem,
> >>>> use -input-charset to override.
> >>>>mkisofs 2.01 (i686-pc-linux-gnu)
> >>>>Scanning i386
> >>>>Scanning i386/Fedora
> >>>>Scanning i386/Fedora/base
> >>>>Scanning i386/Fedora/rpms
> >>>>Scanning i386/images
> >>>>Scanning i386/images/pxeboot
> >>>>Scanning i386/isolinux
> >>>>Excluded by match: i386/isolinux/boot.cat
> >>>>Using SYSTEM_CONFIG_SECURITYLEVEL000.;1 for
> >>>>
> >>>
> >
>
i386/Fedora/rpms/system-config-securitylevel-tui-1.3.12-1.i386.rpm
> >
> >>>>(system-config-securitylevel-1.3.12-1.i386.rpm)
> >>>>Writing: Initial Padblock
> >>
> >>
> >>
> >>>>Start Block 0
> >>>>Done with: Initial Padblock
> >>
> >>
> >>
> >>>>Block(s) 16
> >>>>Writing: Primary Volume Descriptor
> >>
> >>
> >>
> >>>>Start Block 16
> >>>>Done with: Primary Volume Descriptor
> >>
> >>
> >>
> >>>>Block(s) 1
> >>>>Writing: Eltorito Volume Descriptor
> >>
> >>
> >>
> >>>>Start Block 17
> >>>>Size of boot image is 4 sectors -> No emulation
> >>>>Done with: Eltorito Volume Descriptor
> >>
> >>
> >>
> >>>>Block(s) 1
> >>>>Writing: Joliet Volume Descriptor
> >>
> >>
> >>
> >>>>Start Block 18
> >>>>Done with: Joliet Volume Descriptor
> >>
> >>
> >>
> >>>>Block(s) 1
> >>>>Writing: End Volume Descriptor
> >>
> >>
> >>
> >>>>Start Block 19
> >>>>Done with: End Volume Descriptor
> >>
> >>
> >>
> >>>>Block(s) 1
> >>>>Writing: Version block
> >>
> >>
> >>
> >>>>Start Block 20
> >>>>Done with: Version block
> >>
> >>
> >>
> >>>>Block(s) 1
> >>>>Writing: Path table
> >>
> >>
> >>
> >>>>Start Block 21
> >>>>Done with: Path table
> >>
> >>
> >>
> >>>>Block(s) 4
> >>>>Writing: Joliet path table
> >>
> >>
> >>
> >>>>Start Block 25
> >>>>Done with: Joliet path table
> >>
> >>
> >>
> >>>>Block(s) 4
> >>>>Writing: Directory tree
> >>
> >>
> >>
> >>>>Start Block 29
> >>>>Violación de segmento
> >>>
> >>>Why the fault here?
> >>>
> >>>
> >>>>I tried the same with this:
> >>>>mkisofs -J -p "user@xxxxxxxxxxxxx" -P "Red Hat"
> >>
> >>-r
> >>
> >>>-T
> >>>
> >>>>-V "Fedora Core 1 with updates disc2" -v -A
> >>>
> >>>"Fedora
> >>>
> >>>>Core Linux/i386 1" -o fedoracore1-disc2.iso i386
> >>>>but I need the first image bootable !!!
> >>>>
> >>>>I am occuping the Fedora Core 2, I didnt change
> >>>>anything, I just simple copy the first disk and
> >>>
> >>>try to
> >>>
> >>>>make it iso but I didnt work ...
> >>>>
> >>>>Any idea ?
> >>>
> >>>_______________________________________________
>
> _______________________________________________
> Kickstart-list mailing list
> Kickstart-list@xxxxxxxxxx
>
https://www.redhat.com/mailman/listinfo/kickstart-list
>
=====
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
Edgar Alberto Chillón Escárcega
Security Cunsultant - Pfizer OS
Mobile: 04455-1951-9194
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
PublicKeyID: 0x584CF620 Type: DH/DSS
FingerPrint: 1EDE EF26 C6AA 17DC 1A59 97C8 5270 1942 584C F620
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
_________________________________________________________
Do You Yahoo!?
La mejor conexión a internet y 25MB extra a tu correo por $100 al mes. http://net.yahoo.com.mx
