Thanks Daniel but the device boots from eth1 (that's for sure).
-Xavi
Daniel Kidger wrote:
Xavi,
try adding
ksdevice=eth0
or equivalent to the kernel options list.
and..
..... in.tftpd[9095]: tftp: client does not accept options
this is normal.
Yours,
Daniel.
--------------------------------------------------------------
Dr. Dan Kidger, Quadrics Ltd. daniel.kidger@xxxxxxxxxxxx
One Bridewell St., Bristol, BS1 2AA, UK 0117 915 5505
----------------------- www.quadrics.com --------------------
-----Original Message-----
From: Xavier Fustero [mailto:xavi@xxxxxxxxx]
Sent: 23 October 2003 17:08
To: kickstart-list@xxxxxxxxxx
Subject: tftp problem
Hi,
I am trying to use kickstart on IBM e-servers (blades hs20,
type 8678)
with GigaEthernet broadcom bcm5700. I readed all documentation to
install this with PXE-kickstart. Actually I started to play
on that but
I don't success. I got it working from a floppy but when I try to run
automatically on network it fails.
** dhcp:
I have a dhcp server running on an alpha server. It works and provide
the ip to any of our machines.
dhcp.conf for the blades:
-----------------
group {
use-host-decl-names on;
%%CLASS_ENTRY_BEGIN web-blades
host %HOSTNAME% {
hardware ethernet %HW-ADDRESS%;
fixed-address %HOSTNAME%;
next-server my_SERVER;
filename "pxelinux.0";
Actually, if I change the sort of the last two lines it
doesn't boot(?).
** PXE
/tftpboot:
default.netboot-7.3 initrd.img pxelinux.0 pxelinux.cfg
vmlinuz X86PC
/tftpboot/pxelinux.cfg:
CB1EG... (hexadec. link to default.netboot-7.3) default
default.netboot-7.3
default.netboot-7.3 contains:
label ks
kernel vmlinuz
append ksdevice=eth1
ks=nfs:my_nfs_server:/whatever/ip_number-kickstart initrd=initrd.img
lang= devfs=nomount ramdisk_size=8192
** tftp:
tftp-server-0.29-3
server_args = -s /tftpboot
or
server_args = -c -s /tftpboot
** ks.cfg
...
url --url http://ftp.redhat.com/pub/redhat/linux/7.3/en/iso/i386
...
When I boot the blade, it gets the ip from my dhcp, the PXE message
appears on the screen and it starts to boot the vmlinuz and
the initr.
However, the ks doesn't seems to be read because it starts the
installation asking: Choose a language,...... so I have to
make all the
installation process manually. I look on my
/var/log/messages from the
master machine (pxe, tftp and nfs server) and I got the
following message:
..... in.tftpd[9095]: tftp: client does not accept options
Can someone help me on this issue?
Thanks a lot,
Xavi
--
Xavier Fustero Benavent
Work:+44(0)1223 494664
Fax: +44(0)1223 494468
_______________________________________________
Kickstart-list mailing list
Kickstart-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/kickstart-list
_______________________________________________
Kickstart-list mailing list
Kickstart-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/kickstart-list
--
Xavier Fustero Benavent
Work:+44(0)1223 494664
Fax: +44(0)1223 494468
