Dear Redhat Company
While Installation Where some bugs
I don't know to which site to send the report so I've sent to this address.
If I sent the report to an uncorrect address you can send me back the correct one.
thank for attention.
Найди родственников
http://r.mail.ru/cln3834/my.mail.ru/?from_commercial=14
anaconda 11.4.1.62 exception report
Traceback (most recent call first):
File "/usr/lib/booty/bootloaderInfo.py", line 720, in writeGrub
f = open(cf, "w+")
File "/usr/lib/booty/bootloaderInfo.py", line 1112, in write
justConfig | (not self.useGrubVal))
File "/usr/lib/booty/bootloaderInfo.py", line 1220, in write
chainList, defaultDev, justConfig, intf)
File "/usr/lib/anaconda/bootloader.py", line 223, in writeBootloader
justConfigFile, anaconda.intf)
File "/usr/lib/anaconda/dispatch.py", line 204, in moveStep
rc = stepFunc(self.anaconda)
File "/usr/lib/anaconda/dispatch.py", line 127, in gotoNext
self.moveStep()
File "/usr/lib/anaconda/gui.py", line 1358, in nextClicked
self.anaconda.dispatch.gotoNext()
File "/usr/lib/anaconda/iw/progress_gui.py", line 79, in renderCallback
self.intf.icw.nextClicked()
File "/usr/lib/anaconda/gui.py", line 1379, in handleRenderCallback
self.currentWindow.renderCallback()
IOError: [Errno 2] No such file or directory: '/mnt/sysimage/boot/grub/grub.conf'
Local variables in innermost frame:
instRoot: /mnt/sysimage
kernelList: [('linux', 'Fedora', '2.6.27.5-117.fc10.i686')]
target: mbr
defaultDev: VolGroup00/LogVol00
bl: <bootloaderInfo.x86BootloaderInfo instance at 0xb79e99ec>
self: <bootloaderInfo.x86BootloaderInfo instance at 0xb79e99ec>
cf: /mnt/sysimage/boot/grub/grub.conf
fsset: <fsset.FileSystemSet instance at 0xb7c9d58c>
rootDev: VolGroup00/LogVol00
grubTarget: sda
images: {'VolGroup00/LogVol00': ('linux', 'Fedora', 'ext3'), 'sdb1': ('Other', 'Other', 'fat16')}
langs: <language.Language instance at 0xb7c996cc>
justConfigFile: False
chainList: [('Other', 'Other', 'sdb1')]
Anaconda instance, containing members:
rescue_mount: True
intf: InstallInterface instance, containing members:
intf.ppw: InstallProgressWindow instance, containing members:
intf.ppw.pixmaps: [progress_first.png]
intf.ppw.intf: Already dumped
intf.ppw.adbox: <gtk.EventBox object at 0xb408311c (GtkEventBox at 0xa38a100)>
intf.ppw._updateChange: 0.01
intf.ppw.adpix: <gtk.Image object at 0xb408307c (GtkImage at 0xa3405b0)>
intf.ppw._showPercentage: False
intf.ppw.infolabel: <WrappingLabel object at 0xb4083144 (GtkLabel at 0xa33df58)>
intf.ppw.ics: InstallControlState instance, containing members:
intf.ppw.ics.prevEnabled: False
intf.ppw.ics.cw: InstallControlWindow instance, containing members:
intf.ppw.ics.cw.handle: 5221
intf.ppw.ics.cw.currentWindow: Already dumped
intf.ppw.ics.cw.mainxml: <gtk.glade.XML object at 0xb79edcd4 (PyGladeXML at 0x9d83d08)>
intf.ppw.ics.cw.window: <gtk.Window object at 0xb79ede3c (GtkWindow at 0x9d520d8)>
intf.ppw.ics.cw.installFrame: <gtk.Frame object at 0xb79edf54 (GtkFrame at 0x9d3f8e0)>
intf.ppw.ics.cw.anaconda: Already dumped
intf.ppw.ics.cw.reloadRcQueued: 0
intf.ppw.ics.nextEnabled: False
intf.ppw.ics.grabNext: True
intf.ppw.ics.title: Installing Packages
intf.ppw.progress: <gtk.ProgressBar object at 0xb40830a4 (GtkProgressBar at 0xa386a58)>
intf.icw: Already dumped
intf.runres: 800x600
intf.anaconda: Already dumped
rescue: False
updateSrc: None
mediaDevice: /dev/sr0
methodstr: None
dispatch: <dispatch.Dispatcher object at 0xb79e998c>
rootPath: /mnt/sysimage
xdriver: vesa
isKickstart: False
stage2: cdrom:///dev/sr0:/mnt/stage2
id: InstallData instance, containing members:
id.firewall: Firewall instance, containing members:
id.firewall.portlist: []
id.firewall.servicelist: [ssh]
id.firewall.trustdevs: []
id.firewall.enabled: 1
id.anaconda: Already dumped
id.instProgress: None
id.upgradeRoot: [('/dev/VolGroup00/LogVol00', 'ext3')]
id.keyboard: Keyboard instance, containing members:
id.keyboard.info: {'LAYOUT': us, 'KEYBOARDTYPE': pc, 'VARIANT': , 'KEYTABLE': us, 'MODEL': pc105+inet, 'OPTIONS': }
id.keyboard.type: PC
id.keyboard._mods: KeyboardModels instance, containing members:
id.keyboard.beenset: 1
id.timezone: Timezone instance, containing members:
id.timezone.utc: True
id.timezone.tz: Asia/Jerusalem
id.zfcp: ZFCP instance, containing members:
id.zfcp.hasReadConfig: True
id.zfcp.fcpdevs: []
id.upgrade: False
id.monitor: None
id.iscsi: <iscsi.iscsi object at 0xb7ca31ec>
id.fsset: FileSystemSet instance, containing members:
id.fsset.messageWindow: <bound method InstallInterface.messageWindow of <gui.InstallInterface instance at 0xb7c9964c>>
id.fsset.volumesCreated: 1
id.fsset.progressWindow: <bound method InstallInterface.progressWindow of <gui.InstallInterface instance at 0xb7c9964c>>
id.fsset.migratedfs: 1
id.fsset.waitWindow: <bound method InstallInterface.waitWindow of <gui.InstallInterface instance at 0xb7c9964c>>
id.fsset.entries: [fsentry -- device: VolGroup00/LogVol00 mountpoint: /
fsystem: ext3 format: 0
ismounted: 1 options: 'defaults'
label: None fsprofile: None
, fsentry -- device: sda1 mountpoint: /boot
fsystem: ext3 format: True
ismounted: 1 options: 'defaults'
label: /boot fsprofile: None
, fsentry -- device: shm mountpoint: /dev/shm
fsystem: tmpfs format: 0
ismounted: 0 options: 'defaults'
label: None fsprofile: None
, fsentry -- device: devpts mountpoint: /dev/pts
fsystem: devpts format: 0
ismounted: 0 options: 'gid=5,mode=620'
label: None fsprofile: None
, fsentry -- device: sys mountpoint: /sys
fsystem: sysfs format: 0
ismounted: 1 options: 'defaults'
label: None fsprofile: None
, fsentry -- device: proc mountpoint: /proc
fsystem: proc format: 0
ismounted: 1 options: 'defaults'
label: None fsprofile: None
, fsentry -- device: sda2 mountpoint: None
fsystem: physical volume (LVM) format: 0
ismounted: 0 options: 'defaults'
label: None fsprofile: None
, fsentry -- device: VolGroup00 mountpoint: None
fsystem: volume group (LVM) format: 0
ismounted: 0 options: 'defaults'
label: None fsprofile: None
, fsentry -- device: VolGroup00/LogVol01 mountpoint: swap
fsystem: swap format: 0
ismounted: 1 options: 'defaults'
label: None fsprofile: None
]
id.fsset.mountcount: 5
id.desktop: Desktop instance, containing members:
id.desktop.info: {}
id.desktop.runlevel: 3
id.rootParts: [('/dev/VolGroup00/LogVol00', 'ext3', 'Fedora 10', None)]
id.x_already_set: 0
id.backend: YumBackend instance, containing members:
id.backend.modeText: Installing %s
id.backend.instPath: /mnt/sysimage
id.backend.skipFormatRoot: False
id.backend.totalSize: 27018
id.backend.totalFiles: 962
id.backend.instLog: <closed file '/mnt/sysimage/root/install.log', mode 'w+' at 0xbe84020>
id.backend.supportsUpgrades: True
id.backend._loopbackFile: None
id.backend.supportsPackageSelection: True
id.firstboot: 0
id.diskset: DiskSet instance, containing members:
id.diskset.initializedDisks: {'sda': True, 'sdb': True}
id.diskset.disks: {'sda': <PedDisk object at 0xb7b4d998>, 'sdb': <PedDisk object at 0xb7b4d620>}
id.diskset.anaconda: Already dumped
id.diskset.devicesOpen: True
id.diskset.onlyPrimary: None
id.users: Users instance, containing members:
id.users.admin: <Admin object at 0xb665af50>
id.displayMode: g
id.auth: --enableshadow --passalgo=sha512
id.ksdata: None
id.bootloader: x86BootloaderInfo instance, containing members:
id.bootloader._configdir: /boot/grub
id.bootloader.doUpgradeOnly: 0
id.bootloader.above1024: 0
id.bootloader.defaultDevice: mbr
id.bootloader.pure: None
id.bootloader.perms: 384
id.bootloader.serialDevice: None
id.bootloader.args: KernelArguments instance, containing members:
id.bootloader.args.args:
id.bootloader.kernelLocation: /boot/
id.bootloader.timeout: 5
id.bootloader._configname: grub.conf
id.bootloader.device: sda
id.bootloader.kickstart: 0
id.bootloader.serialOptions: None
id.bootloader.useGrubVal: 1
id.bootloader._drivelist: [sda, sdb]
id.bootloader.images: BootImages instance, containing members:
id.bootloader.images.default: VolGroup00/LogVol00
id.bootloader.images.images: {'VolGroup00/LogVol00': ('linux', 'Fedora', 'ext3'), 'sdb1': ('Other', 'Other', 'fat16')}
id.bootloader.drivelist: [sda, sdb]
id.bootloader.serial: 0
id.bootloader.password: None
id.bootloader.forceLBA32: 0
id.extraModules: []
id.network: Network instance, containing members:
id.network.netdevices: {'eth0': DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:50:8d:e7:b6:19
ONBOOT=yes
}
id.network.ksdevice: None
id.network.overrideDHCPhostname: False
id.network.hostname: Primary
id.network.domains: []
id.instClass: <installclass.DefaultInstall object at 0xb7da7e0c>
id.partitions: Partitions instance, containing members:
id.partitions.encryptionPassphrase:
id.partitions.useAutopartitioning: 1
id.partitions.autoClearPartType: 0
id.partitions.nextUniqueID: 8
id.partitions.reinitializeDisks: 0
id.partitions.useFdisk: 0
id.partitions.autoClearPartDrives: []
id.partitions.protected: []
id.partitions.retrofitPassphrase: False
id.partitions.anaconda: Already dumped
id.partitions.zeroMbr: 0
id.partitions.isKickstart: 0
id.partitions.requests: [PreexistingPartitionSpec instance, containing members:
currentDrive: None
fsprofile: None
resizable: True
format: True
migrate: 0
origfstype: ext3FileSystem instance, containing members:
origfstype.partedPartitionFlags: []
origfstype.checked: 1
origfstype.name: ext3
origfstype.migratetofs: None
origfstype.bootable: True
origfstype.deviceArguments: {}
origfstype.linuxnativefs: 1
origfstype.resizable: True
origfstype.fsprofile: None
origfstype.needProgram: []
origfstype.maxSizeMB: 8388608
origfstype.supported: -1
origfstype.defaultOptions: defaults
origfstype.fsProfileSpecifier: -T
origfstype.packages: [e2fsprogs]
origfstype.supportsFsProfiles: True
origfstype.extraFormatArgs: [-t, ext3]
origfstype.formattable: 1
origfstype.partedFileSystemType: <PedFileSystemType object at 0xb7f0a920>
origfstype.maxLabelChars: 16
primary: None
fsopts: None
preexist: 1
fslabel: /boot
uniqueID: 1
device: sda1
mountpoint: /boot
requestSize: 196.075195312
grow: 0
size: 196.075195312
targetSize: None
end: 401624
encryption: None
drive: sda
dev: PartitionDevice instance, containing members:
dev.isSetup: 0
dev.deviceOptions:
dev.crypto: None
dev.label: None
dev.device: sda1
dev.doLabel: 1
maxSizeMB: None
start: 63
protected: 0
maxResizeSize: 196.0
multidrive: None
ignoreBootConstraints: 0
type: 1
fstype: Already dumped
, PreexistingPartitionSpec instance, containing members:
currentDrive: None
migrate: None
origfstype: lvmPhysicalVolumeDummyFileSystem instance, containing members:
origfstype.partedPartitionFlags: [6]
origfstype.checked: 0
origfstype.name: physical volume (LVM)
origfstype.migratetofs: None
origfstype.bootable: False
origfstype.deviceArguments: {}
origfstype.linuxnativefs: 1
origfstype.resizable: False
origfstype.fsprofile: None
origfstype.needProgram: []
origfstype.maxSizeMB: 8388608
origfstype.supported: 1
origfstype.defaultOptions: defaults
origfstype.fsProfileSpecifier: None
origfstype.packages: [lvm2]
origfstype.supportsFsProfiles: False
origfstype.extraFormatArgs: []
origfstype.formattable: 1
origfstype.partedFileSystemType: <PedFileSystemType object at 0xb7f0a620>
origfstype.maxLabelChars: 16
primary: None
drive: sda
dev: PartitionDevice instance, containing members:
dev.isSetup: 0
dev.deviceOptions:
dev.crypto: None
dev.label: None
dev.device: sda2
dev.doLabel: 1
uniqueID: 2
mountpoint: None
requestSize: 152429.238281
size: 152429.238281
end: 312576704
encryption: None
grow: 0
start: 401625
ignoreBootConstraints: 0
type: 1
resizable: True
format: None
fsopts: None
fstype: Already dumped
preexist: 1
device: sda2
maxSizeMB: None
targetSize: None
fsprofile: None
fslabel: None
protected: 0
maxResizeSize: 152429.0
multidrive: None
, VG Request -- name: VolGroup00 uniqueID: 7
format: None pesize: 32768
physvols: [2]
, PreexistingPartitionSpec instance, containing members:
currentDrive: None
migrate: None
origfstype: FATFileSystem instance, containing members:
origfstype.partedPartitionFlags: []
origfstype.checked: 0
origfstype.name: vfat
origfstype.migratetofs: None
origfstype.bootable: False
origfstype.deviceArguments: {}
origfstype.linuxnativefs: 0
origfstype.resizable: False
origfstype.fsprofile: None
origfstype.needProgram: []
origfstype.maxSizeMB: 1048576
origfstype.supported: -1
origfstype.defaultOptions: umask=0077,shortname=winnt
origfstype.fsProfileSpecifier: None
origfstype.packages: [dosfstools]
origfstype.supportsFsProfiles: False
origfstype.extraFormatArgs: []
origfstype.formattable: 1
origfstype.partedFileSystemType: <PedFileSystemType object at 0xb7f0a9e0>
origfstype.maxLabelChars: 16
primary: None
drive: sdb
dev: None
uniqueID: 3
mountpoint: None
requestSize: 119.447753906
size: 119.447753906
end: 244691
encryption: None
grow: 0
start: 63
ignoreBootConstraints: 0
type: 1
resizable: True
format: None
fsopts: None
fstype: Already dumped
preexist: 1
device: sdb1
maxSizeMB: None
targetSize: None
fsprofile: None
fslabel: None
protected: 0
maxResizeSize: 119.0
multidrive: None
, LV Request -- mountpoint: None uniqueID: 6
type: swap format: 0
size: 4544.0 lvname: LogVol01 volgroup: 7
options: 'None' fsprofile: None encryption: 'None'
, LV Request -- mountpoint: / uniqueID: 5
type: ext3 format: False
size: 147840 lvname: LogVol00 volgroup: 7
options: 'None' fsprofile: None encryption: 'None'
]
id.partitions.autoEncrypt: False
id.partitions.autoPartitionRequests: [New Part Request -- mountpoint: None uniqueID: None
type: physical volume (LVM) format: 1
device: None drive: None primary: None
size: 0 grow: 1 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
options: 'None'
fsprofile: None encryption: None
, VG Request -- name: lvm uniqueID: None
format: 1 pesize: 32768
physvols: []
, LV Request -- mountpoint: / uniqueID: None
type: ext3 format: 1
size: 1024 lvname: LogVol00 volgroup: lvm
options: 'None' fsprofile: None encryption: 'None'
, New Part Request -- mountpoint: /boot uniqueID: None
type: ext3 format: 1
device: None drive: None primary: None
size: 200 grow: 0 maxsize: None
start: None end: None migrate: None fslabel: None origfstype: None
options: 'None'
fsprofile: None encryption: None
, LV Request -- mountpoint: None uniqueID: None
type: swap format: 1
size: 1000 lvname: LogVol01 volgroup: lvm
options: 'None' fsprofile: None encryption: 'None'
]
id.partitions.deletes: []
id.isHeadless: 0
id.videocard: None
id.instLanguage: Language instance, containing members:
id.instLanguage.targetLang: None
id.instLanguage.default: en_US.UTF-8
id.instLanguage.displayMode: g
id.instLanguage.current: en_US.UTF-8
id.security: Security instance, containing members:
id.security.selinux: 1
id.upgradeSwapInfo: None
dir: 1
backend: Already dumped
/tmp/syslog:
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.27.5-117.fc10.i586 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 11:43:59 EST 2008
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
<6> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 000000009fff0000 (usable)
<6> BIOS-e820: 000000009fff0000 - 000000009fff3000 (ACPI NVS)
<6> BIOS-e820: 000000009fff3000 - 00000000a0000000 (ACPI data)
<6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<6>last_pfn = 0x9fff0 max_arch_pfn = 0x100000
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>kernel direct mapping tables up to 38000000 @ 7000-c000
<6>Using x86 segment limits to approximate NX protection
<6>RAMDISK: 7efa2000 - 7ffff6d6
<6>Allocated new RAMDISK: 00975000 - 019d26d6
<6>Move RAMDISK from 000000007efa2000 - 000000007ffff6d5 to 00975000 - 019d26d5
<6>DMI 2.3 present.
<4>ACPI: RSDP 000F71F0, 0014 (r0 IntelR)
<4>ACPI: RSDT 9FFF3040, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
<4>ACPI: FACP 9FFF30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
<4>ACPI: DSDT 9FFF3180, 4573 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
<4>ACPI: FACS 9FFF0000, 0040
<4>ACPI: BOOT 9FFF7740, 0028 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
<4>ACPI: MCFG 9FFF7880, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
<4>ACPI: APIC 9FFF77C0, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
<5>1663MB HIGHMEM available.
<5>896MB LOWMEM available.
<6> mapped low ram: 0 - 38000000
<6> low ram: 00000000 - 38000000
<6> bootmap 00008000 - 0000f000
<6>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
<6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
<6> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
<6> #3 [0000400000 - 000097016c] TEXT DATA BSS ==> [0000400000 - 000097016c]
<6> #4 [0000971000 - 0000975000] INIT_PG_TABLE ==> [0000971000 - 0000975000]
<6> #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
<6> #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
<6> #7 [0000975000 - 00019d26d6] NEW RAMDISK ==> [0000975000 - 00019d26d6]
<6> #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
<6>found SMP MP-table at [c00f56f0] 000f56f0
<4>Zone PFN ranges:
<4> DMA 0x00000000 -> 0x00001000
<4> Normal 0x00001000 -> 0x00038000
<4> HighMem 0x00038000 -> 0x0009fff0
<4>Movable zone start PFN for each node
<4>early_node_map[2] active PFN ranges
<4> 0: 0x00000000 -> 0x0000009f
<4> 0: 0x00000100 -> 0x0009fff0
<7>On node 0 totalpages: 655247
<7>free_area_init_node: node 0, pgdat c07f1900, node_mem_map c19d3000
<7> DMA zone: 3967 pages, LIFO batch:0
<7> Normal zone: 223520 pages, LIFO batch:31
<7> HighMem zone: 422640 pages, LIFO batch:31
<6>Using APIC driver default
<6>ACPI: PM-Timer IO Port: 0x408
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<6>Allocating PCI resources starting at a4000000 (gap: a0000000:40000000)
<6>PERCPU: Allocating 41372 bytes of per cpu data
<7>NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 650127
<5>Kernel command line: initrd=initrd.img xdriver=vesa BOOT_IMAGE=vmlinuz
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<7>CPU 0 irqstacks, hard=c089d000 soft=c087d000
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<6>TSC: PIT calibration confirmed by PMTIMER.
<6>TSC: using PMTIMER calibration value
<4>Detected 3056.326 MHz processor.
<4>Console: colour VGA+ 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2576188k/2621376k available (2730k kernel code, 43840k reserved, 1418k data, 412k init, 1703872k highmem)
<6>virtual kernel memory layout:
<6> fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
<6> pkmap : 0xff400000 - 0xff800000 (4096 kB)
<6> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
<6> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
<6> .init : 0xc0813000 - 0xc087a000 ( 412 kB)
<6> .data : 0xc06aab0e - 0xc080d610 (1418 kB)
<6> .text : 0xc0400000 - 0xc06aab0e (2730 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<6>SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 6112.65 BogoMIPS (lpj=3056326)
<6>Security Framework initialized
<6>SELinux: Initializing.
<7>SELinux: Starting in permissive mode
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys devices
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<6>using mwait in idle threads.
<6>Checking 'hlt' instruction... OK.
<6>ACPI: Core revision 20080609
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
<7>CPU 1 irqstacks, hard=c089e000 soft=c087e000
<6>Booting processor 1/1 ip 6000
<6>Initializing CPU#1
<6>Calibrating delay using timer specific routine.. 6111.48 BogoMIPS (lpj=3055740)
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU1: Thermal monitoring enabled
<6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
<6>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
<6>Brought up 2 CPUs
<6>Total of 2 processors activated (12224.13 BogoMIPS).
<7>sizeof(vma)=84 bytes
<7>sizeof(page)=32 bytes
<7>sizeof(inode)=340 bytes
<7>sizeof(dentry)=132 bytes
<7>sizeof(ext3inode)=492 bytes
<7>sizeof(buffer_head)=56 bytes
<7>sizeof(skbuff)=184 bytes
<7>sizeof(task_struct)=3264 bytes
<7>CPU0 attaching sched-domain:
<7> domain 0: span 0-1 level SIBLING
<7> groups: 0 1
<7> domain 1: span 0-1 level CPU
<7> groups: 0-1
<7>CPU1 attaching sched-domain:
<7> domain 0: span 0-1 level SIBLING
<7> groups: 1 0
<7> domain 1: span 0-1 level CPU
<7> groups: 0-1
<6>net_namespace: 840 bytes
<6>Booting paravirtualized kernel on bare hardware
<4>Time: 4:10:41 Date: 11/30/08
<6>NET: Registered protocol family 16
<6>No dock devices found.
<6>ACPI: bus type pci registered
<5>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0
<5>PCI: MCFG area at e0000000 reserved in E820
<6>PCI: Using MMCONFIG for extended config space
<6>PCI: Using configuration type 1 for base access
<7>ACPI: EC: Look up EC in DSDT
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:01.0: PME# disabled
<7>PCI: 0000:00:1d.0 reg 20 io port: [ff00, ff1f]
<7>PCI: 0000:00:1d.1 reg 20 io port: [fe00, fe1f]
<7>PCI: 0000:00:1d.2 reg 20 io port: [fd00, fd1f]
<7>PCI: 0000:00:1d.3 reg 20 io port: [fc00, fc1f]
<7>PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdfff000, fdfff3ff]
<6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1d.7: PME# disabled
<7>PCI: 0000:00:1e.2 reg 10 io port: [f000, f0ff]
<7>PCI: 0000:00:1e.2 reg 14 io port: [fb00, fb3f]
<7>PCI: 0000:00:1e.2 reg 18 32bit mmio: [fdffe000, fdffe1ff]
<7>PCI: 0000:00:1e.2 reg 1c 32bit mmio: [fdffd000, fdffd0ff]
<6>pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1e.2: PME# disabled
<7>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
<6>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
<6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
<7>PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
<7>PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
<7>PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
<7>PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
<7>PCI: 0000:00:1f.2 reg 20 io port: [f900, f90f]
<6>pci 0000:00:1f.2: PME# supported from D3hot
<6>pci 0000:00:1f.2: PME# disabled
<7>PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
<7>PCI: 0000:01:00.0 reg 10 32bit mmio: [fa000000, faffffff]
<7>PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
<7>PCI: 0000:01:00.0 reg 1c 64bit mmio: [fb000000, fbffffff]
<7>PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
<4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force'
<7>PCI: bridge 0000:00:01.0 io port: [c000, cfff]
<7>PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fcffffff]
<7>PCI: bridge 0000:00:01.0 32bit mmio pref: [d0000000, dfffffff]
<7>PCI: 0000:02:01.0 reg 10 io port: [dc00, dcff]
<7>PCI: 0000:02:01.0 reg 14 32bit mmio: [fddff000, fddff0ff]
<7>PCI: 0000:02:01.0 reg 30 32bit mmio: [0, 1ffff]
<7>pci 0000:02:01.0: supports D1
<7>pci 0000:02:01.0: supports D2
<6>pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
<6>pci 0000:02:01.0: PME# disabled
<7>PCI: 0000:02:02.0 reg 10 32bit mmio: [fddfe000, fddfe7ff]
<7>PCI: 0000:02:02.0 reg 14 32bit mmio: [fddf8000, fddfbfff]
<7>pci 0000:02:02.0: supports D1
<7>pci 0000:02:02.0: supports D2
<6>pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot
<6>pci 0000:02:02.0: PME# disabled
<7>PCI: 0000:02:05.0 reg 10 32bit mmio: [fdde0000, fddeffff]
<7>PCI: 0000:02:05.0 reg 14 io port: [df00, df07]
<6>pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:02:05.0: PME# disabled
<7>PCI: 0000:02:06.0 reg 10 io port: [de00, de3f]
<7>pci 0000:02:06.0: supports D2
<6>pci 0000:00:1e.0: transparent bridge
<7>PCI: bridge 0000:00:1e.0 io port: [d000, dfff]
<7>PCI: bridge 0000:00:1e.0 32bit mmio: [fdd00000, fddfffff]
<7>PCI: bridge 0000:00:1e.0 64bit mmio pref: [fde00000, fdefffff]
<7>bus 00 -> node 0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 9 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *9 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 9 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 7 9 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNK1] (IRQs 4 5 7 *9 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 15 devices
<6>ACPI: ACPI bus type pnp unregistered
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>PCI: Using ACPI for IRQ routing
<6>NetLabel: Initializing
<6>NetLabel: domain hash size = 128
<6>NetLabel: protocols = UNLABELED CIPSOv4
<6>NetLabel: unlabeled traffic allowed by default
<7>hpet clockevent registered
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>hpet0: 3 64-bit timers, 14318180 Hz
<6>tracer: 772 pages allocated for 65536 entries of 48 bytes
<6> actual entries 65620
<4>ACPI: RTC can wake from S4
<6>system 00:01: ioport range 0xb78-0xb7b has been reserved
<6>system 00:01: ioport range 0xf78-0xf7b has been reserved
<6>system 00:01: ioport range 0xa78-0xa7b has been reserved
<6>system 00:01: ioport range 0xe78-0xe7b has been reserved
<6>system 00:01: ioport range 0xbbc-0xbbf has been reserved
<6>system 00:01: ioport range 0xfbc-0xfbf has been reserved
<6>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:01: ioport range 0x290-0x30f has been reserved
<6>system 00:0b: ioport range 0x400-0x4bf could not be reserved
<6>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
<6>system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
<6>system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
<6>system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
<6>system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
<6>system 00:0e: iomem range 0x9fff0000-0x9fffffff could not be reserved
<6>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:0e: iomem range 0x100000-0x9ffeffff could not be reserved
<6>system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>system 00:0e: iomem range 0xfed13000-0xfed1dfff could not be reserved
<6>system 00:0e: iomem range 0xfed20000-0xfed8ffff could not be reserved
<6>system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
<6>system 00:0e: iomem range 0xffb00000-0xffb7ffff could not be reserved
<6>system 00:0e: iomem range 0xfff00000-0xffffffff could not be reserved
<6>system 00:0e: iomem range 0xe0000-0xeffff has been reserved
<6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
<6>pci 0000:00:01.0: IO window: 0xc000-0xcfff
<6>pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff
<6>pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
<6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
<6>pci 0000:00:1e.0: IO window: 0xd000-0xdfff
<6>pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff
<6>pci 0000:00:1e.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
<6>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>pci 0000:00:01.0: setting latency timer to 64
<7>pci 0000:00:1e.0: setting latency timer to 64
<6>bus: 00 index 0 io port: [0, ffff]
<6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
<6>bus: 01 index 0 io port: [c000, cfff]
<6>bus: 01 index 1 mmio: [fa000000, fcffffff]
<6>bus: 01 index 2 mmio: [d0000000, dfffffff]
<6>bus: 01 index 3 mmio: [0, 0]
<6>bus: 02 index 0 io port: [d000, dfff]
<6>bus: 02 index 1 mmio: [fdd00000, fddfffff]
<6>bus: 02 index 2 mmio: [fde00000, fdefffff]
<6>bus: 02 index 3 io port: [0, ffff]
<6>bus: 02 index 4 mmio: [0, ffffffffffffffff]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
<7>Switched to high resolution mode on CPU 0
<4> it is
<6>Freeing initrd memory: 16757k freed
<6>Simple Boot Flag at 0x7f set to 0x1
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: disabled - APM is not SMP safe.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1228018241.184:1): initialized
<4>highmem bounce pool size: 64 pages
<6>HugeTLB registered 4 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>msgmni has been set to 1738
<7>SELinux: Registering netfilter hooks
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>pci 0000:01:00.0: Boot video device
<7>pcieport-driver 0000:00:01.0: setting latency timer to 64
<6>pcieport-driver 0000:00:01.0: found MSI capability
<7>pci_express 0000:00:01.0:pcie00: allocate port service
<7>pci_express 0000:00:01.0:pcie03: allocate port service
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
<6>ACPI: Power Button (CM) [PWRB]
<6>processor ACPI0007:00: registered as cooling_device0
<6>processor ACPI0007:01: registered as cooling_device1
<6>thermal LNXTHERM:01: registered as thermal_zone0
<6>ACPI: Thermal Zone [THRM] (20 C)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.103
<6>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>brd: module loaded
<6>loop: module loaded
<6>input: Macintosh mouse button emulation as /devices/virtual/input/input2
<4>Driver 'sd' needs updating - please use bus_type methods
<4>Driver 'sr' needs updating - please use bus_type methods
<7>ahci 0000:00:1f.2: version 3.0
<6>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<6>ahci 0000:00:1f.2: PCI INT B disabled
<4>ahci: probe of 0000:00:1f.2 failed with error -22
<7>ata_piix 0000:00:1f.2: version 2.12
<6>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<6>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
<7>ata_piix 0000:00:1f.2: setting latency timer to 64
<6>scsi0 : ata_piix
<6>scsi1 : ata_piix
<6>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
<6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
<6>ata1.01: ATA-6: WDC WD1600JD-00GBB0, 02.05D02, max UDMA/100
<6>ata1.01: 312581808 sectors, multi 16: LBA48
<6>ata1.01: applying bridge limits
<6>ata1.01: configured for UDMA/100
<6>ata2.00: ATAPI: ASUS DRW-1608P3S, 1.24, max UDMA/66
<6>ata2.01: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
<6>ata2.00: configured for UDMA/66
<6>ata2.01: configured for UDMA/33
<5>scsi 0:0:1:0: Direct-Access ATA WDC WD1600JD-00G 02.0 PQ: 0 ANSI: 5
<5>sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 0:0:1:0: [sda] Write Protect is off
<7>sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 0:0:1:0: [sda] Write Protect is off
<7>sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2
<5>sd 0:0:1:0: [sda] Attached SCSI disk
<5>sd 0:0:1:0: Attached scsi generic sg0 type 0
<5>scsi 1:0:0:0: CD-ROM ASUS DRW-1608P3S 1.24 PQ: 0 ANSI: 5
<4>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>sr 1:0:0:0: Attached scsi generic sg1 type 5
<5>scsi 1:0:1:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5
<4>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
<7>sr 1:0:1:0: Attached scsi CD-ROM sr1
<5>sr 1:0:1:0: Attached scsi generic sg2 type 5
<6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>ehci_hcd 0000:00:1d.7: setting latency timer to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
<7>ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 8 ports detected
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.i586 ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.7
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<6>USB Universal Host Controller Interface driver v3.0
<6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>uhci_hcd 0000:00:1d.0: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.0
<6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<7>uhci_hcd 0000:00:1d.1: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>usb 2-2: new full speed USB device using uhci_hcd and address 2
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.1
<6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<7>uhci_hcd 0000:00:1d.2: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.2
<6>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
<7>uhci_hcd 0000:00:1d.3: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>usb 2-2: New USB device found, idVendor=0ac8, idProduct=301b
<6>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-2: Product: PC Camera
<6>usb 2-2: Manufacturer: Z-Star Corp.
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.3
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one month, hpet irqs
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>usb 5-1: new full speed USB device using uhci_hcd and address 2
<7>psmouse serio1: ID: 10 00 64<6>usb 5-1: configuration #1 chosen from 1 choice
<6>usb 5-1: New USB device found, idVendor=10d6, idProduct=1100
<6>usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
<6>usb 5-1: Product: USB 2.0(FS) FLASH DISK
<6>usb 5-1: SerialNumber: USB 2.0(FS) FLASH DISK
<6>usbcore: registered new interface driver hiddev
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<4>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<4>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
<4>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
<4>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<4> Magic number: 0:324:162
<6>Freeing unused kernel memory: 412k freed
<6>Write protecting the kernel text: 2732k
<6>Write protecting the kernel read-only data: 1172k
<6>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<6>input: PC Speaker as /devices/platform/pcspkr/input/input5
<6>squashfs: version 3.4 (2008/08/26) Phillip Lougher
<6>Loading iSCSI transport class v2.0-870.
<5>iscsi: registered transport (tcp)
<6>No iBFT detected.
<6>Initializing USB Mass Storage driver...
<6>scsi2 : SCSI emulation for USB Mass Storage devices
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
<6>r8169 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<6>r8169 0000:02:01.0: no PCI Express capability
<6>eth0: RTL8110s at 0xf88f0000, 00:50:8d:e7:b6:19, XID 04000000 IRQ 16
<6>firewire_ohci 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<27>Nov 30 04:10:45 udevd-event[1094]: node_symlink: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
<5>firewire_ohci: Added fw-ohci device 0000:02:02.0, OHCI version 1.10
<29>Nov 30 04:10:46 NetworkManager: <info> starting...
<29>Nov 30 04:10:46 NetworkManager: <info> Waiting for HAL to start...
<28>Nov 30 04:10:46 NetworkManager: <WARN> nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():
Sucess
<29>Nov 30 04:10:46 NetworkManager: <info> Trying to start the supplicant...
<29>Nov 30 04:10:46 NetworkManager: <info> Trying to start the system settings daemon...
<28>Nov 30 04:10:46 nm-system-settings: initial_add_devices_of_type: could not get device from HAL: The name org.freedesktop.Hal was not provided by any .service files (2).
<28>Nov 30 04:10:46 nm-system-settings: initial_add_devices_of_type: could not get device from HAL: The name org.freedesktop.Hal was not provided by any .service files (2).
<28>Nov 30 04:10:46 nm-system-settings: initial_add_devices_of_type: could not get device from HAL: The name org.freedesktop.Hal was not provided by any .service files (2).
<28>Nov 30 04:10:46 nm-system-settings: ifcfg-fedora: Could not get hostname: failed to read /etc/sysconfig/network
<29>Nov 30 04:10:46 nm-system-settings: Loaded plugin ifcfg-fedora: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
<29>Nov 30 04:10:46 nm-system-settings: ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ...
<29>Nov 30 04:10:46 nm-system-settings: ifcfg-fedora: error: File '/etc/sysconfig/network-scripts/ifcfg-eth0' specified device 'eth0', but the device's type could not be determined.
<29>Nov 30 04:10:46 NetworkManager: <info> HAL re-appeared
<29>Nov 30 04:10:46 NetworkManager: <info> eth0: driver is 'r8169'.
<29>Nov 30 04:10:46 NetworkManager: <info> Found new Ethernet device 'eth0'.
<29>Nov 30 04:10:46 NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_50_8d_e7_b6_19
<5>firewire_core: created device fw0: GUID 00508d0000e6b619, S400
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<4>ISOFS: Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<29>Nov 30 04:10:50 NetworkManager: <info> (eth0): device state change: 1 -> 2
<29>Nov 30 04:10:50 NetworkManager: <info> (eth0): bringing up device.
<6>r8169: eth0: link up
<6>r8169: eth0: link up
<29>Nov 30 04:10:50 NetworkManager: <info> (eth0): preparing device.
<29>Nov 30 04:10:50 NetworkManager: <info> (eth0): deactivating device (reason: 2).
<29>Nov 30 04:10:50 NetworkManager: <info> (eth0): carrier now ON (device state 2)
<29>Nov 30 04:10:50 NetworkManager: <info> (eth0): device state change: 2 -> 3
<7>usb-storage: device scan complete
<6>scsi scan: INQUIRY result too short (5), using 36
<5>scsi 2:0:0:0: Direct-Access GENERIC USB DISK DEVICE 1.00 PQ: 0 ANSI: 0 CCS
<5>sd 2:0:0:0: [sdb] 245473 512-byte hardware sectors (126 MB)
<5>sd 2:0:0:0: [sdb] Write Protect is off
<7>sd 2:0:0:0: [sdb] Mode Sense: 00 c0 00 00
<3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
<5>sd 2:0:0:0: [sdb] 245473 512-byte hardware sectors (126 MB)
<5>sd 2:0:0:0: [sdb] Write Protect is off
<7>sd 2:0:0:0: [sdb] Mode Sense: 00 c0 00 00
<3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
<6> sdb: sdb1
<5>sd 2:0:0:0: [sdb] Attached SCSI removable disk
<5>sd 2:0:0:0: Attached scsi generic sg3 type 0
<7>SELinux: 8192 avtab hash slots, 109076 rules.
<7>SELinux: 8192 avtab hash slots, 109076 rules.
<7>SELinux: 8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats
<7>SELinux: 73 classes, 109076 rules
<7>SELinux: Completing initialization.
<7>SELinux: Setting up existing superblocks.
<7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
<7>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
<7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
<7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>type=1403 audit(1228018254.946:2): policy loaded auid=4294967295 ses=4294967295
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>xor: automatically using best checksumming function: pIII_sse
<6> pIII_sse : 4672.000 MB/sec
<6>xor: using function: pIII_sse (4672.000 MB/sec)
<6>async_tx: api initialized (async)
<4>raid6: int32x1 707 MB/s
<4>raid6: int32x2 757 MB/s
<4>raid6: int32x4 625 MB/s
<4>raid6: int32x8 585 MB/s
<4>raid6: mmxx1 1820 MB/s
<4>raid6: mmxx2 2042 MB/s
<4>raid6: sse1x1 1089 MB/s
<4>raid6: sse1x2 1542 MB/s
<4>raid6: sse2x1 2187 MB/s
<4>raid6: sse2x2 2976 MB/s
<4>raid6: using algorithm sse2x2 (2976 MB/s)
<6>md: raid6 personality registered for level 6
<6>md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
<6>md: raid10 personality registered for level 10
<6>md: linear personality registered for level -1
<4>GFS2 (built Nov 18 2008 11:45:29) installed
<6>JFS: nTxBlock = 8192, nTxLock = 65536
<6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>device-mapper: multipath: version 1.0.5 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<7>SELinux: initialized (dev dm-0, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<7>SELinux: initialized (dev sda1, type ext3), uses xattr
<6>Adding 4653048k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:4653048k
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on dm-0, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<7>SELinux: initialized (dev dm-0, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<7>SELinux: initialized (dev sda1, type ext3), uses xattr
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0.new ...
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: error: Couldn't parse file '/etc/sysconfig/network-scripts/ifcfg-eth0.new'
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0.new ...
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: error: Couldn't parse file '/etc/sysconfig/network-scripts/ifcfg-eth0.new'
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0.new ...
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: error: Couldn't parse file '/etc/sysconfig/network-scripts/ifcfg-eth0.new'
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0.new ...
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: error: Couldn't parse file '/etc/sysconfig/network-scripts/ifcfg-eth0.new'
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0.new ...
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: error: Couldn't parse file '/etc/sysconfig/network-scripts/ifcfg-eth0.new'
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ...
<29>Nov 30 04:14:22 nm-system-settings: ifcfg-fedora: read connection 'System eth0'
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) starting connection 'System eth0'
<29>Nov 30 04:14:22 NetworkManager: <info> (eth0): device state change: 3 -> 4
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
<29>Nov 30 04:14:22 NetworkManager: <info> (eth0): device state change: 4 -> 5
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
<29>Nov 30 04:14:22 NetworkManager: <info> (eth0): device state change: 5 -> 7
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Beginning DHCP transaction.
<29>Nov 30 04:14:22 NetworkManager: <info> dhclient started with pid 1786
<29>Nov 30 04:14:22 NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
<30>Nov 30 04:14:22 dhclient: Internet Systems Consortium DHCP Client 4.0.0
<30>Nov 30 04:14:22 dhclient: Copyright 2004-2007 Internet Systems Consortium.
<30>Nov 30 04:14:22 dhclient: All rights reserved.
<30>Nov 30 04:14:22 dhclient: For info, please visit http://www.isc.org/sw/dhcp/
<30>Nov 30 04:14:22 dhclient:
<29>Nov 30 04:14:22 NetworkManager: <info> DHCP: device eth0 state changed (null) -> preinit
<30>Nov 30 04:14:22 dhclient: Listening on LPF/eth0/00:50:8d:e7:b6:19
<30>Nov 30 04:14:22 dhclient: Sending on LPF/eth0/00:50:8d:e7:b6:19
<30>Nov 30 04:14:22 dhclient: Sending on Socket/fallback
<30>Nov 30 04:14:25 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
<30>Nov 30 04:14:25 dhclient: DHCPOFFER from 192.168.2.1
<30>Nov 30 04:14:25 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
<30>Nov 30 04:14:25 dhclient: DHCPACK from 192.168.2.1
<29>Nov 30 04:14:25 NetworkManager: <info> DHCP: device eth0 state changed preinit -> bound
<29>Nov 30 04:14:25 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled...
<29>Nov 30 04:14:25 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) started...
<29>Nov 30 04:14:25 NetworkManager: <info> address 192.168.2.90
<29>Nov 30 04:14:25 NetworkManager: <info> prefix 24 (255.255.255.0)
<29>Nov 30 04:14:25 NetworkManager: <info> gateway 192.168.2.1
<29>Nov 30 04:14:25 NetworkManager: <info> nameserver '192.168.2.1'
<29>Nov 30 04:14:25 NetworkManager: <info> domain name 'Router'
<29>Nov 30 04:14:25 NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
<29>Nov 30 04:14:25 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete.
<29>Nov 30 04:14:25 NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
<30>Nov 30 04:14:25 dhclient: bound to 192.168.2.90 -- renewal in 438594302 seconds.
<29>Nov 30 04:14:26 NetworkManager: <info> (eth0): device state change: 7 -> 8
<29>Nov 30 04:14:26 NetworkManager: <info> Policy set 'System eth0' (eth0) as default for routing and DNS.
<29>Nov 30 04:14:26 NetworkManager: <info> Activation (eth0) successful, device activated.
<29>Nov 30 04:14:26 NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
/tmp/anaconda.log:
04:10:45 INFO : kernel command line: initrd=initrd.img xdriver=vesa BOOT_IMAGE=vmlinuz
04:10:45 DEBUG : no ifcfg files found in /etc/sysconfig/network-scripts
04:10:45 INFO : anaconda version 11.4.1.62 on i386 starting
04:10:45 INFO : 2594316 kB are available
04:10:45 DEBUG : probing buses
04:10:45 DEBUG : waiting for hardware to initialize
04:10:47 INFO : trying to mount CD device /dev/sr0 on /mnt/stage2
04:10:47 INFO : drive status is CDS_DISC_OK
04:10:49 INFO : mounted loopback device /mnt/runtime on /dev/loop0 as /mnt/stage2/images/install.img
04:10:49 INFO : Looking for updates in /mnt/stage2/images/updates.img
04:10:49 INFO : Looking for product in /mnt/stage2/images/product.img
04:10:49 INFO : trying to mount CD device /dev/sr1 on /mnt/stage2
04:10:49 INFO : drive status is CDS_NO_DISC
04:10:49 INFO : Detected stage 2 image on CD (url: cdrom:///dev/sr0:/mnt/stage2)
04:10:52 INFO : stage2 url is cdrom:///dev/sr0:/mnt/stage2
04:10:54 INFO : Loading SELinux policy
04:10:54 INFO : getting ready to spawn shell now
04:10:55 INFO : Running anaconda script /usr/bin/anaconda
04:10:55 DEBUG : adding extraArg --xdriver=vesa
04:11:04 INFO : using only installclass _Fedora
04:11:04 INFO : anaconda called with cmdline = ['/usr/bin/anaconda', '--stage2', 'cdrom:///dev/sr0:/mnt/stage2', '--xdriver', 'vesa', '--graphical', '--selinux']
04:11:04 INFO : Display mode = g
04:11:10 INFO : Started mini-wm
04:11:11 INFO : Starting graphical installation...
04:11:11 INFO : ISCSID is /usr/sbin/iscsid
04:11:11 INFO : ISCSIADM is /usr/sbin/iscsiadm
04:11:11 DEBUG : queryFirmware: ISCSIADM is /usr/sbin/iscsiadm
04:11:11 INFO : ISCSID is /usr/sbin/iscsid
04:11:11 INFO : ISCSIADM is /usr/sbin/iscsiadm
04:11:11 DEBUG : queryFirmware: ISCSIADM is /usr/sbin/iscsiadm
04:11:11 INFO : Detected 2544M of memory
04:11:11 INFO : Swap attempt of 1000M to 4544M
04:11:11 WARNING : step installtype does not exist
04:11:11 WARNING : step confirminstall does not exist
04:11:11 WARNING : step complete does not exist
04:11:12 INFO : moving (1) to step welcome
04:11:18 INFO : moving (1) to step language
04:11:21 INFO : moving (1) to step keyboard
04:11:23 INFO : moving (1) to step findrootparts
04:11:23 DEBUG : starting mpaths
04:11:23 DEBUG : self.driveList(): ['sda', 'sdb']
04:11:23 DEBUG : DiskSet.skippedDisks: []
04:11:23 DEBUG : DiskSet.skippedDisks: []
04:11:23 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:11:23 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:11:23 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:11:23 DEBUG : mpaths: []
04:11:23 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:11:23 DEBUG : starting dmraids
04:11:23 DEBUG : self.driveList(): ['sda', 'sdb']
04:11:23 DEBUG : DiskSet.skippedDisks: []
04:11:23 DEBUG : DiskSet.skippedDisks: []
04:11:23 DEBUG : starting all dmraids on drives ['sda', 'sdb']
04:11:23 DEBUG : scanning for dmraid on drives ['sda', 'sdb']
04:11:23 DEBUG : done starting dmraids. Drivelist: ['sda', 'sdb']
04:11:24 DEBUG : adding drive sda to disk list
04:11:26 DEBUG : adding drive sdb to disk list
04:11:26 DEBUG : starting mpaths
04:11:26 DEBUG : self.driveList(): ['sda', 'sdb']
04:11:26 DEBUG : DiskSet.skippedDisks: []
04:11:26 DEBUG : DiskSet.skippedDisks: []
04:11:26 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:11:26 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:11:26 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:11:26 DEBUG : mpaths: []
04:11:26 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:11:29 INFO : vg VolGroup00, size is 152416, pesize is 32768
04:11:29 INFO : lv is VolGroup00/LogVol00, size of 147840
04:11:29 INFO : lv is VolGroup00/LogVol01, size of 4544
04:11:29 DEBUG : starting mpaths
04:11:29 DEBUG : self.driveList(): ['sda', 'sdb']
04:11:29 DEBUG : DiskSet.skippedDisks: []
04:11:29 DEBUG : DiskSet.skippedDisks: []
04:11:29 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:11:29 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:11:29 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:11:29 DEBUG : mpaths: []
04:11:29 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:11:31 INFO : lv is VolGroup00/LogVol00, size of 147840
04:11:31 INFO : lv is VolGroup00/LogVol01, size of 4544
04:11:31 DEBUG : isys.py:mount()- going to mount /dev/VolGroup00/LogVol00 on /mnt/sysimage with options defaults,ro
04:11:31 DEBUG : isys.py:mount()- going to mount /dev/VolGroup00/LogVol01 on /mnt/sysimage with options defaults,ro
04:11:31 DEBUG : isys.py:mount()- going to mount /dev/sda1 on /mnt/sysimage with options defaults
04:11:31 WARNING : step complete does not exist
04:11:31 INFO : moving (1) to step findinstall
04:11:34 WARNING : step complete does not exist
04:11:34 INFO : moving (1) to step network
04:11:41 INFO : moving (1) to step timezone
04:11:41 WARNING : /usr/lib/anaconda/iw/timezone_gui.py:58: GtkWarning: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
self.xml = gtk.glade.XML("/usr/share/system-config-date/system-config-date.glade", domain="system-config-date")
04:11:55 INFO : moving (1) to step accounts
04:12:17 INFO : moving (1) to step partitionobjinit
04:12:17 INFO : no /tmp/fcpconfig; not configuring zfcp
04:12:17 DEBUG : starting mpaths
04:12:17 DEBUG : self.driveList(): ['sda', 'sdb']
04:12:17 DEBUG : DiskSet.skippedDisks: []
04:12:17 DEBUG : DiskSet.skippedDisks: []
04:12:17 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:12:17 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:12:17 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:12:17 DEBUG : mpaths: []
04:12:17 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:12:18 DEBUG : adding drive sda to disk list
04:12:19 DEBUG : adding drive sdb to disk list
04:12:19 INFO : lv VolGroup00/LogVol00, attr is -wi---
04:12:19 INFO : lv VolGroup00/LogVol01, attr is -wi---
04:12:19 INFO : lv is VolGroup00/LogVol00, size of 147840
04:12:19 INFO : lv is VolGroup00/LogVol01, size of 4544
04:12:19 DEBUG : starting mpaths
04:12:19 DEBUG : self.driveList(): ['sda', 'sdb']
04:12:19 DEBUG : DiskSet.skippedDisks: []
04:12:19 DEBUG : DiskSet.skippedDisks: []
04:12:19 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:12:19 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:12:19 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:12:19 DEBUG : mpaths: []
04:12:19 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:12:21 INFO : pv is /dev/sda2 in vg VolGroup00, size is 152429
04:12:21 INFO : vg VolGroup00, size is 152416, pesize is 32768
04:12:21 INFO : lv is VolGroup00/LogVol00, size of 147840
04:12:21 INFO : lv is VolGroup00/LogVol01, size of 4544
04:12:21 INFO : used size of /dev/VolGroup00/LogVol00 is 13623.0
04:12:22 INFO : moving (1) to step parttype
04:12:22 INFO : ISCSID is /usr/sbin/iscsid
04:12:22 INFO : ISCSIADM is /usr/sbin/iscsiadm
04:12:29 INFO : moving (1) to step partition
04:12:34 INFO : pv is /dev/sda2 in vg VolGroup00, size is 152429
04:12:35 INFO : computeVGSize: vgsize is 152384
04:12:44 INFO : computeVGSize: vgsize is 152384
04:12:44 INFO : computeVGSize: vgsize is 152384
04:13:06 INFO : pv is /dev/sda2 in vg VolGroup00, size is 152429
04:13:06 INFO : computeVGSize: vgsize is 152384
04:13:14 INFO : computeVGSize: vgsize is 152384
04:13:14 INFO : computeVGSize: vgsize is 152384
04:13:15 INFO : computeVGSize: vgsize is 152384
04:13:15 DEBUG : starting mpaths
04:13:15 DEBUG : self.driveList(): ['sda', 'sdb']
04:13:15 DEBUG : DiskSet.skippedDisks: []
04:13:15 DEBUG : DiskSet.skippedDisks: []
04:13:15 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:13:15 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:13:15 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:13:15 DEBUG : mpaths: []
04:13:15 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:13:15 DEBUG : adding drive sda to disk list
04:13:16 DEBUG : adding drive sdb to disk list
04:13:22 INFO : used size of /dev/sda1 is 20.0
04:13:30 DEBUG : starting mpaths
04:13:30 DEBUG : self.driveList(): ['sda', 'sdb']
04:13:30 DEBUG : DiskSet.skippedDisks: []
04:13:30 DEBUG : DiskSet.skippedDisks: []
04:13:30 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:13:30 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:13:30 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:13:30 DEBUG : mpaths: []
04:13:30 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:13:31 DEBUG : adding drive sda to disk list
04:13:32 DEBUG : adding drive sdb to disk list
04:13:40 INFO : moving (1) to step partitiondone
04:13:45 INFO : moving (1) to step migratefilesystems
04:13:45 INFO : moving (1) to step enablefilesystems
04:13:45 DEBUG : starting mpaths
04:13:45 DEBUG : self.driveList(): ['sda', 'sdb']
04:13:45 DEBUG : DiskSet.skippedDisks: []
04:13:45 DEBUG : DiskSet.skippedDisks: []
04:13:45 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:13:45 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:13:45 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:13:45 DEBUG : mpaths: []
04:13:45 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:13:47 INFO : lv is VolGroup00/LogVol00, size of 147840
04:13:47 INFO : lv is VolGroup00/LogVol01, size of 4544
04:13:47 INFO : disk.commit() for /dev/sda
04:13:47 INFO : disk.commit() for /dev/sdb
04:13:47 DEBUG : starting mpaths
04:13:47 DEBUG : self.driveList(): ['sda', 'sdb']
04:13:47 DEBUG : DiskSet.skippedDisks: []
04:13:47 DEBUG : DiskSet.skippedDisks: []
04:13:47 DEBUG : starting all mpaths on drives ['sda', 'sdb']
04:13:47 DEBUG : scanning for multipath on drives ['sda', 'sdb']
04:13:47 DEBUG : loading bdevid modules from: '/tmp/updates/bdevid/:/lib/bdevid/:/usr/lib/bdevid/'
04:13:47 DEBUG : mpaths: []
04:13:47 DEBUG : done starting mpaths. Drivelist: ['sda', 'sdb']
04:13:47 DEBUG : adding drive sda to disk list
04:13:48 DEBUG : adding drive sdb to disk list
04:13:50 INFO : formatting /boot as ext3
04:13:50 INFO : Format command: ['mke2fs', '/dev/sda1', '-t', 'ext3']
04:13:51 INFO : trying to mount /dev/VolGroup00/LogVol00 on /
04:13:51 INFO : set SELinux context for mountpoint / to False
04:13:51 DEBUG : mounting /dev/VolGroup00/LogVol00 on /mnt/sysimage// as ext3
04:13:51 DEBUG : isys.py:mount()- going to mount /dev/VolGroup00/LogVol00 on /mnt/sysimage with options defaults
04:13:51 INFO : set SELinux context for newly mounted filesystem root at / to False
04:13:51 INFO : trying to mount /dev/sda1 on /boot
04:13:51 INFO : set SELinux context for mountpoint /boot to False
04:13:51 DEBUG : mounting /dev/sda1 on /mnt/sysimage//boot as ext3
04:13:51 DEBUG : isys.py:mount()- going to mount /dev/sda1 on /mnt/sysimage/boot with options defaults
04:13:51 INFO : set SELinux context for newly mounted filesystem root at /boot to False
04:13:51 INFO : trying to mount sys on /sys
04:13:51 INFO : set SELinux context for mountpoint /sys to False
04:13:51 DEBUG : mounting sys on /mnt/sysimage//sys as sysfs
04:13:51 DEBUG : isys.py:mount()- going to mount sys on /mnt/sysimage/sys with options defaults
04:13:51 INFO : set SELinux context for newly mounted filesystem root at /sys to False
04:13:51 INFO : trying to mount proc on /proc
04:13:51 INFO : set SELinux context for mountpoint /proc to False
04:13:51 DEBUG : mounting proc on /mnt/sysimage//proc as proc
04:13:51 DEBUG : isys.py:mount()- going to mount proc on /mnt/sysimage/proc with options defaults
04:13:51 INFO : set SELinux context for newly mounted filesystem root at /proc to False
04:13:51 INFO : moving (1) to step bootloadersetup
04:13:51 INFO : moving (1) to step bootloader
04:13:58 INFO : moving (1) to step reposetup
04:13:58 DEBUG : isys.py:mount()- going to mount /dev/sr0 on /mnt/source with options defaults,ro
04:13:58 INFO : found installation media on /dev/sr0
04:13:59 INFO : set mediaid of repo InstallationRepo to: 1227142402.812888
04:14:15 INFO : no groups missing
04:14:15 INFO : moving (1) to step tasksel
04:14:21 INFO : self.hostname = Primary
04:14:21 WARNING : no network devices were available to look up host name
04:15:19 INFO : added repository Fedora 10 - i386 with with source URL http://mirrors.fedoraproject.org/mirrorlist?repo=fedora-10&arch=i386
04:15:22 INFO : added group information for repository Fedora 10 - i386
04:15:40 INFO : added repository Fedora 10 - i386 - Updates with with source URL http://mirrors.fedoraproject.org/mirrorlist?repo=updates-released-f10&arch=i386
04:15:40 INFO : added group information for repository Fedora 10 - i386 - Updates
04:15:44 INFO : moving (1) to step basepkgsel
04:15:46 INFO : moving (1) to step group-selection
04:16:55 INFO : moving (1) to step postselection
04:16:55 DEBUG : no kernel-smp package
04:16:55 INFO : selected kernel package for kernel
04:17:17 INFO : moving (1) to step install
04:17:17 INFO : moving (1) to step setuptime
04:17:17 ERROR : unable to set timezone
04:17:20 INFO : moving (1) to step preinstallconfig
04:17:20 DEBUG : isys.py:mount()- going to mount /selinux on /mnt/sysimage/selinux with options defaults
04:17:20 WARNING : no dev package, going to bind mount /dev
04:17:20 DEBUG : isys.py:mount()- going to mount /dev on /mnt/sysimage/dev with options defaults,bind
04:17:20 INFO : self.hostname = Primary
04:17:20 INFO : moving (1) to step installpackages
04:17:20 INFO : Preparing to install packages
04:18:39 WARNING : /usr/lib/anaconda/iw/progress_gui.py:55: GtkWarning: gtk_progress_set_percentage: assertion `percentage >= 0 && percentage <= 1.0' failed
self.progress.set_fraction(pct)
04:18:39 INFO : moving (1) to step postinstallconfig
04:18:39 INFO : moving (1) to step writeconfig
04:18:39 INFO : Writing main configuration
04:18:41 INFO : self.hostname = Primary
04:18:44 INFO : moving (1) to step firstboot
04:18:44 INFO : moving (1) to step instbootloader
/tmp/lvmout:
Running... ['lvm', 'vgmknodes', '-v']
/mnt/sysimage/root/install.log:
Installing jadetex-3.13-2.fc9.noarch
warning: jadetex-3.13-2.fc9: Header V3 DSA signature: NOKEY, key ID 4ebfc273
Installing docbook-simple-1.1-4.fc10.noarch
Installing xhtml1-dtds-1.0-20020801.1.noarch
Installing xmlto-0.0.21-2.fc10.i386
Installing docbook-slides-3.4.0-4.fc10.noarch
Installing linuxdoc-tools-0.9.21-17.fc10.i386
Installing docbook-utils-pdf-0.6.14-14.fc10.noarch
Installing tetex-font-cm-lgc-0.5-10.fc10.noarch
/mnt/sysimage/root/upgrade.log:
--
Fedora-websites-list mailing list
Fedora-websites-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-websites-list
