Hi folks,
I have an ASUS N550JK laptop running Fedora XFCE. I didn't use it for
some months. It was running Fedora 39 XFCE. Today I did an update. After
the update it hangs on boot. Because I removed "rhgb quiet" from
GRUB_CMDLINE_LINUX I can see messages while the system boots. It seems
that it hangs after a message like
... nouveau ... Enabling HDA controller
As "nouveau" seems to be a driver for the graphic card and I can also
see that the update probably installed a newer kernel
6.8.9-200.fc39.x86_64 I did a reboot with choosing an older kernel
6.6.9-200.fc39.x86_64 from boot menu. With this older kernel the system
is able to boot without problems.
Then I did an upgrade to Fedora 40 XFCE because I hoped that this could
fix the problem. But with Fedora 40 I have the same problem. On starting
with the now very new kernel 6.8.9-300.fc40.x86_64 it hangs on boot with
the same message
... nouveau ... Enabling HDA controller
If I start Fedora 40 with the older kernel 6.6.9-200.fc39.x86_64 from
boot menu then the system boots without problems.
For providing you some information about the hardware, I did run
sudo dmidecode
but this gives very very much information. Here is only a short snippet
with some basic information:
System Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: N550JK
Version: 1.0
SKU Number: ASUS-NotebookSKU
Family: N
To find something about the graphic card I did run
dmesg | grep nouveau
and in the very first line I can see that it seems to be a NVIDIA GM107
(117110a2):
[ 2.426287] nouveau 0000:01:00.0: NVIDIA GM107 (117110a2)
[ 2.442106] nouveau 0000:01:00.0: bios: version 82.07.2a.00.02
[ 2.526832] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 2.526889] nouveau 0000:01:00.0: bus: MMIO read of 00000000
FAULT at 022554 [ PRIVRING ]
[ 3.197385] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 3.197387] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 3.197389] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not
found
[ 3.197390] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 3.198239] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer
copies
[ 3.198466] [drm] Initialized nouveau 1.4.0 20120801 for
0000:01:00.0 on minor 1
[ 3.198535] nouveau 0000:01:00.0: [drm] No compatible format found
[ 3.198537] nouveau 0000:01:00.0: [drm] Cannot find any crtc or
sizes
[ 52.988052] nouveau 0000:01:00.0: Enabling HDA controller
[ 59.107580] nouveau 0000:01:00.0: Enabling HDA controller
[ 59.227433] nouveau 0000:01:00.0: bus: MMIO read of 00000000
FAULT at 619444 [ PRIVRING ]
[ 97.171565] nouveau 0000:01:00.0: Enabling HDA controller
[ 97.288155] nouveau 0000:01:00.0: bus: MMIO read of 00000000
FAULT at 619444 [ PRIVRING ]
I do not want to manually choose the kernel each time when I boot the
computer. What can I do?
Regards,
Meikel
--
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue