After many years of maintaing dual boot setups (Fedora/Windows) my harddisk layout got a bit confusing: Linux and Windows partition were scattered on mainly two harddisks (all gpt). I was able to free a third harddisk (ssd) and copied the linux partitions boot, root and home over to the new disk, where they now reside as /dev/sda1, /dev/sda2 and /dev/sda3. I left the efi-partition on the disk /dev/sdc together with Windows 11. As in /etc/fstab all partitions are identified by their UUID, I didn't feel a need to adjust that file. Trying to boot brought me to the grub command line prompt. After some trial and error, the appropriate sequence of grub commands (set root=..., linux ..., initrd ...) made the system boot into a fully working Fedora 39 installation. From there I tried to repair GRUB2, following the guidelines at https://fedoraproject.org/wiki/GRUB_2?rd=Grub2#Updating_GRUB_2_configuration_on_UEFI_systems namely those three steps: # rm /boot/efi/EFI/fedora/grub.cfg # rm /boot/grub2/grub.cfg # dnf reinstall shim-* grub2-efi-* grub2-common But rebooting still gets me to the dreaded grub>. So what am I missing? BTW, I did NOT use the grub2-install command which shoud not be used on UEFI systems. -- _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
