On Wednesday, November 29th, 2023 at 8:56 AM, George N. White III <gnwiii@xxxxxxxxx> wrote:
> On Wed, Nov 29, 2023 at 10:28 AM olivares33561 via users <users@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> > Dear fellow fedora users,
> >
> > upon updating and rebooting the new kernel refuses to boot or just hangs. How do I troubleshoot this issue?
> > I have to boot 6.5.12-300 so I can use the computer.
>
>
> Others have already asked for details from journalctl and removing "rhgb quiet". You can also use <Esc>
> when booting to see the messages.
>
> Are you using non-free packages with akmods? One common issue with command-line updates is rebooting
> before the non-free package install is complete.
>
> --
Your mail to 'users@xxxxxxxxxxxxxxxxxxxxxxx' with the subject
Re: kernel-6.6.2-201.fc39.x86_64 does not boot, process hangs
Is being held until the list moderator can review it for approval.
The message is being held because:
The message is larger than the 60 KB maximum size
Either the message will get posted to the list, or you will receive
notification of the moderator's decision.
NOTE: If your message has been held due to size, please consider this
a rejection and a friendly request to reduce the size and resend. The
list moderators will not approve such messages.
If you are attaching logs or command output, please trim it to a
minimal amount (we can ask for more context, if needed).
If you are attaching an image, please crop it to reduce their size.
Also keep in mind that attachments will be encoded by your mail client
(usually via base64) and this encoding increases the size by as much
as 33%.
output of command was big. No proprietary blobs in kernel. Using intel hdmi output.
$ sudo lspci
00:00.0 PCI bridge: Intel Corporation Device 4c53 (rev 01)
00:02.0 VGA compatible controller: Intel Corporation RocketLake-S GT1 [UHD Graphics 730] (rev 04)
00:04.0 Signal processing controller: Intel Corporation Device 4c03 (rev 01)
00:08.0 System peripheral: Intel Corporation Device 4c11 (rev 01)
00:12.0 Signal processing controller: Intel Corporation Comet Lake PCH Thermal Controller
00:14.0 USB controller: Intel Corporation Comet Lake USB 3.1 xHCI Host Controller
00:14.2 RAM memory: Intel Corporation Comet Lake PCH Shared SRAM
00:14.3 Network controller: Intel Corporation Comet Lake PCH CNVi WiFi
00:15.0 Serial bus controller: Intel Corporation Comet Lake PCH Serial IO I2C Controller #0
00:16.0 Communication controller: Intel Corporation Comet Lake HECI Controller
00:17.0 RAID bus controller: Intel Corporation Comet Lake PCH-H RAID
00:1c.0 PCI bridge: Intel Corporation Device 06bc (rev f0)
00:1f.0 ISA bridge: Intel Corporation H470 Chipset LPC/eSPI Controller
00:1f.3 Audio device: Intel Corporation Device f1c8
00:1f.4 SMBus: Intel Corporation Comet Lake PCH SMBus Controller
00:1f.5 Serial bus controller: Intel Corporation Comet Lake PCH SPI Controller
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 2600 (rev 21)
Everything just worked before 6.6 kernel.
Best Regards,
Antonio
--
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
