Re: Setting the active area of drawing tablet

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 13, 2021 at 10:14 PM Samuel Sieb <samuel@xxxxxxxx> wrote:
>
> >> Check the min and max numbers for yours and then move the stylus to the
> >> corners and see if the position matches.  The input system should
> >> automatically scale the resulting values to match your display.  Do you
> >> have more than one screen?
> >
> > Thanks, again, Samuel. I have only one screen.
> >
> > By sliding my hand with the pen on the tablet, I reach the right
> > border of the screen when I am in the middle of my drawing tablet.
> > Ideally, the screen border should be reached only when the pen gets
> > close to the tablet border -- that is what I mean.
>
> Ok, then it sounds like something is getting the wrong dimensions.  Are
> you using Gnome?
>
> > My "evtest" does not report Event type 3 (EV_ABS). Please, see below
> > what is reported:
> >
> > Select the device event number [0-19]: 18
>
> There must be another device for it then.  Maybe 19?

Thanks, Samuel. My fault. The correct one reports the following:

Select the device event number [0-19]: 5
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x6161 product 0x4d15 version 0x111
Input device name: "LetSketch LetSketch"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 320 (BTN_TOOL_PEN)
    Event code 321 (BTN_TOOL_RUBBER)
    Event code 330 (BTN_TOUCH)
    Event code 331 (BTN_STYLUS)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value      0
      Min        0
      Max    32767
      Resolution     152
    Event code 1 (ABS_Y)
      Value      0
      Min        0
      Max    32767
      Resolution     244
    Event code 24 (ABS_PRESSURE)
      Value      0
      Min        0
      Max     8191
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Properties:
  Property type 1 (INPUT_PROP_DIRECT)
Testing ... (interrupt to exit)
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure



[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux