Am trying to plug a usb memory stick onto my computer .
From the looks of it , at first it looks that it gets recognized up to
a point , initially it gets asigned letter "f" /dev/sdf
but then some error pop up and i can't see it on dolphin or access it
somehow .
The attached files contains the relevant messages but i don't understand
what it says .
Can someone sched some light in it ??
[ 4014.282666] usb 8-1.2.2: new high-speed USB device number 8 using xhci_hcd
[ 4014.471968] usb 8-1.2.2: New USB device found, idVendor=090c, idProduct=2000, bcdDevice=11.00
[ 4014.471974] usb 8-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4014.471978] usb 8-1.2.2: Product: Disk 3.0
[ 4014.471981] usb 8-1.2.2: Manufacturer: USB
[ 4014.471984] usb 8-1.2.2: SerialNumber: CCYY25C13Z6U1L4B
[ 4014.476177] usb-storage 8-1.2.2:1.0: USB Mass Storage device detected
[ 4014.478683] scsi host8: usb-storage 8-1.2.2:1.0
[ 4015.582579] scsi 8:0:0:0: Direct-Access USB Disk 3.0 1100 PQ: 0 ANSI: 6
[ 4015.583068] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 4015.583210] sd 8:0:0:0: [sdf] 60825600 512-byte logical blocks: (31.1 GB/29.0 GiB)
[ 4015.584674] sd 8:0:0:0: [sdf] Write Protect is off
[ 4015.584677] sd 8:0:0:0: [sdf] Mode Sense: 43 00 00 00
[ 4015.584838] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4015.594774] sdf: sdf1
[ 4015.597594] sd 8:0:0:0: [sdf] Attached SCSI removable disk
[ 4045.899746] usb 8-1.2.2: reset high-speed USB device number 8 using xhci_hcd
[ 4051.516810] usb 8-1.2.2: device descriptor read/64, error -110
[ 4067.396181] usb 8-1.2.2: device descriptor read/64, error -110
[ 4067.676181] usb 8-1.2.2: reset high-speed USB device number 8 using xhci_hcd
[ 4067.853179] usb 8-1.2.2: device descriptor read/64, error -71
[ 4068.133239] usb 8-1.2.2: device descriptor read/64, error -71
[ 4068.412243] usb 8-1.2.2: reset high-speed USB device number 8 using xhci_hcd
[ 4068.412394] usb 8-1.2.2: Device not responding to setup address.
[ 4068.620061] usb 8-1.2.2: Device not responding to setup address.
[ 4068.827953] usb 8-1.2.2: device not accepting address 8, error -71
[ 4069.003956] usb 8-1.2.2: reset high-speed USB device number 8 using xhci_hcd
[ 4069.004171] usb 8-1.2.2: Device not responding to setup address.
[ 4069.212222] usb 8-1.2.2: Device not responding to setup address.
4069.420041] usb 8-1.2.2: device not accepting address 8, error -71
[ 4069.420234] sd 8:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=53s
[ 4069.420241] sd 8:0:0:0: [sdf] tag#0 CDB: Read(10) 28 00 03 a0 1f 80 00 00 08 00
[ 4069.420246] blk_update_request: I/O error, dev sdf, sector 60825472 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 4069.420295] usb 8-1.2.2: USB disconnect, device number 8
[ 4069.423997] blk_update_request: I/O error, dev sdf, sector 60825472 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[ 4069.424001] Buffer I/O error on dev sdf, logical block 60825472, async page read
[ 4069.424005] Buffer I/O error on dev sdf, logical block 60825473, async page read
[ 4069.424007] Buffer I/O error on dev sdf, logical block 60825474, async page read
[ 4069.424009] Buffer I/O error on dev sdf, logical block 60825475, async page read
[ 4069.424011] Buffer I/O error on dev sdf, logical block 60825476, async page read
[ 4069.424013] Buffer I/O error on dev sdf, logical block 60825477, async page read
[ 4069.424015] Buffer I/O error on dev sdf, logical block 60825478, async page read
[ 4069.424017] Buffer I/O error on dev sdf, logical block 60825479, async page read
[ 4069.644993] usb 8-1.2.2: new high-speed USB device number 9 using xhci_hcd
[ 4069.828273] usb 8-1.2.2: device descriptor read/64, error -71
[ 4070.108273] usb 8-1.2.2: device descriptor read/64, error -71
[ 4070.396059] usb 8-1.2.2: new high-speed USB device number 10 using xhci_hcd
[ 4070.572231] usb 8-1.2.2: device descriptor read/64, error -71
[ 4070.852210] usb 8-1.2.2: device descriptor read/64, error -71
[ 4070.956163] usb 8-1.2-port2: attempt power cycle
[ 4071.652027] usb 8-1.2.2: new high-speed USB device number 11 using xhci_hcd
[ 4071.652207] usb 8-1.2.2: Device not responding to setup address.
[ 4071.860167] usb 8-1.2.2: Device not responding to setup address.
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
