On 2020-08-17 12:50, ToddAndMargo via users wrote:
On 2020-08-17 07:25, Tom H wrote:
On Mon, Aug 17, 2020 at 11:38 AM ToddAndMargo via users
<users@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
What am I doing wrong here? nmcli says eno2 is
disconnected but is working as if it was connected.
eno2 is my (only) Internet connection.
$ nmcli device status | grep -i eno2
eno2 ethernet disconnected --
$ ping -c 1 -I eno2 8.8.8.8
PING 8.8.8.8 (8.8.8.8) from 192.168.250.135 eno2: 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=118 time=12.0 ms
Without more information, the above must mean that eno2 isn't
configured by NM.
The error is random.
$ /usr/bin/nmcli c up eno2
clears the error
$ cat /etc/sysconfig/network-scripts/ifcfg-eno2
TYPE=Ethernet
BOOTPROTO=dhcp
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
# NAME=enp7s0
NAME=eno2
UUID=a056777e-8a75-4da5-9585-6aacf150b862
DEVICE=eno2
ONBOOT=yes
# PEERDNS=yes
PEERDNS=no
PEERROUTES=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
DNS1=127.0.0.1
USERCTL=yes
Do you need any other information?
I added
NM_CONTROLLED=yes
to my ifcfg-eno2. But I think it is the default
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
