On 2020-07-28 20:48, Roger Heflin wrote:
order usually matters little.
Given there are only 4 I would expect them to be connected to the same
sata device, but it could be that there are 2 2 port sata devices and
the labeling denotes which of those 2 port devices they are connected
to. The labeling is rather odd for it being 4 on the same device.
What is the part number of motherboard?
°
It's an ASROCK J3455-ITX.
for some servers that never get shut down I try to keep the power
requirements as low as possible, I've measured these and they run below
50 watts when idle which is most of the time since it's home usage. They
are low end but work well enough ...
i also see in the manual:
Storage • 2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and
Hot Plug
• 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, sup-
port NCQ, AHCI and Hot Plug
I have wondered about the SATA connector designations and their use for
a long time and appreciate the information. I'll just go on as in the
past then, it matters not.
Thanks
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
FEDORA-32/64bit LINUX XFCE Fastmail POP3
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
