My system has two efi boot partitions on separate drives. I rarely boot to Windows and I wanted it on its own completely separate drive. I configured a default in the firmware settings and then for a while I would choose an alternate when I needed to by hitting a key to bring up the efi boot menu. Eventually I got around to adding a boot entry for my second (WIndows) drive to grub on the main drive and now I can just select Windows from grub if I need to boot into it. On Mon, 2020-06-01 at 20:13 +0200, Patrick Dupre wrote: Hello,I guess that very think is more or less, OK, I have just some difficultiesto understand the logic.How does the efi firmware decide which /boot/efi to use as the source when the computer is startedI realized that I have only one EFI System Partition on sdaBy default, the system goes to grub, where I can choose the OS.I do not use the efi options to go there (at least intentionally).Does it have to be selected from the efi firmware menu at each boot?I do not think so. As I said, I go directly to the grub menu (by default).I guess that if I active the efi menu, I could choose other options to boot.===========================================================================Patrick DUPRÉ | | email:pdupre@xxxxxxxLaboratoire interdisciplinaire Carnot de Bourgogne9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCETel: +33 (0)380395988===========================================================================On Mon, 1 Jun 2020 10:10:41 -0400Jonathan Billings <billings@xxxxxxxxxx> wrote:If you see in the Fedora entry, it has:HD(3,GPT,a5c3bc11-e83b-48d0-be96-783af37228f1,0x2001800\,0xfa000)/File(\EFI\FEDORA\GRUBX64.EFI)That means to look for a volume with the 3rd GPT partition, with theUUID of a5c3bc11-e83b-48d0-be96-783af37228f1 (and some other data).On that disk, look for the /EFI/FEDORA/GRUBX64.EFI executable(remember, this is a DOS filesystem so it's case-insensitive).Run 'blkid' on a running system, and you'll see that the PARTUUID ofthe EFI volume matches the UUID in the above EFI entry.You can have an EFI volume on multiple disks. EFI also supportsthings like network boot, which has a different syntax EFI entry. Theefibootmgr command does a lot of the hard work of figuring that outfor you, so you don't need to manually enter that information.You seem knowledgeable, so I'll ask you. How does the efi firmwaredecide which /boot/efi to use as the source when the computer isstarted? Does it have to be selected from the efi firmware menu ateach boot?_______________________________________________users mailing list --users@xxxxxxxxxxxxxxxxxxxxxxxTo unsubscribe send an email tousers-leave@xxxxxxxxxxxxxxxxxxxxxxxFedora Code of Conduct:https://docs.fedoraproject.org/en-US/project/code-of-conduct/List Guidelines:https://fedoraproject.org/wiki/Mailing_list_guidelinesList Archives:https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx_______________________________________________users mailing list --users@xxxxxxxxxxxxxxxxxxxxxxxTo unsubscribe send an email tousers-leave@xxxxxxxxxxxxxxxxxxxxxxxFedora Code of Conduct:https://docs.fedoraproject.org/en-US/project/code-of-conduct/List Guidelines:https://fedoraproject.org/wiki/Mailing_list_guidelinesList Archives:https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx |
_______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
