> Why do you think the controller is recognized by F29? I used "lspci" and I saw it listed. I used "lsscsi" and saw it listed > When you did the fresh install did you supply an external driver disk? > or did the basic iso see it without anything extra? The basic iso see it without anything extra (Areca driver is already in the kernel) If I use "dmesg" then I see this: 31.942855] arcmsr12: abort device command of scsi id = 0 lun = 0 [ 34.675863] arcmsr: executing bus reset eh.....num_resets = 0, num_aborts = 1 [ 44.731864] scsi 12:0:0:0: Device offlined - not ready after error recovery [ 65.734858] arcmsr12: abort device command of scsi id = 1 lun = 0 [ 68.467858] arcmsr: executing bus reset eh.....num_resets = 1, num_aborts = 2 [ 78.523892] scsi 12:0:1:0: Device offlined - not ready after error recovery [ 99.526856] arcmsr12: abort device command of scsi id = 2 lun = 0 [ 102.259830] arcmsr: executing bus reset eh.....num_resets = 2, num_aborts = 3 [ 112.316826] arcmsr12: abort device command of scsi id = 2 lun = 0 [ 115.043833] arcmsr: executing bus reset eh.....num_resets = 3, num_aborts = 4 [ 125.115840] scsi 12:0:2:0: Device offlined - not ready after error recovery [ 146.116451] arcmsr12: abort device command of scsi id = 3 lun = 0 [ 148.848891] arcmsr: executing bus reset eh.....num_resets = 4, num_aborts = 5 [ 158.903014] scsi 12:0:3:0: Device offlined - not ready after error recovery [ 179.901823] arcmsr12: abort device command of scsi id = 6 lun = 0 [ 182.634292] arcmsr: executing bus reset eh.....num_resets = 5, num_aborts = 6 [ 192.689283] arcmsr12: abort device command of scsi id = 6 lun = 0 [ 195.416755] arcmsr: executing bus reset eh.....num_resets = 6, num_aborts = 7 [ 205.485866] scsi 12:0:6:0: Device offlined - not ready after error recovery [ 226.142935] arcmsr12: abort device command of scsi id = 7 lun = 0 [ 228.875402] arcmsr: executing bus reset eh.....num_resets = 7, num_aborts = 8 [ 238.929720] scsi 12:0:7:0: Device offlined - not ready after error recovery [ 259.928309] arcmsr12: abort device command of scsi id = 8 lun = 0 [ 262.660774] arcmsr: executing bus reset eh.....num_resets = 8, num_aborts = 9 [ 272.714901] scsi 12:0:8:0: Device offlined - not ready after error recovery [ 294.025507] arcmsr12: abort device command of scsi id = 10 lun = 0 [ 296.767621] arcmsr: executing bus reset eh.....num_resets = 9, num_aborts = 10 [ 306.821863] scsi 12:0:10:0: Device offlined - not ready after error recovery [ 327.820517] arcmsr12: abort device command of scsi id = 12 lun = 0 [ 330.552996] arcmsr: executing bus reset eh.....num_resets = 10, num_aborts = 11 [ 340.607982] arcmsr12: abort device command of scsi id = 12 lun = 0 [ 343.326886] arcmsr: executing bus reset eh.....num_resets = 11, num_aborts = 12 [ 353.358146] scsi 12:0:12:0: Device offlined - not ready after error recovery [ 374.269799] arcmsr12: abort device command of scsi id = 14 lun = 0 [ 376.991165] arcmsr: executing bus reset eh.....num_resets = 12, num_aborts = 13 [ 387.006697] scsi 12:0:14:0: Device offlined - not ready after error recovery [ 407.954533] arcmsr12: abort device command of scsi id = 15 lun = 0 [ 410.666396] arcmsr: executing bus reset eh.....num_resets = 13, num_aborts = 14 [ 420.651803] arcmsr12: abort device command of scsi id = 15 lun = 0 [ 423.357996] arcmsr: executing bus reset eh.....num_resets = 14, num_aborts = 15 [ 433.358641] scsi 12:0:15:0: Device offlined - not ready after error recovery [ 433.358848] scsi 12:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 433.359698] scsi 12:0:16:0: Attached scsi generic sg2 type 3 _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
