On 2020-02-23 08:50, home user wrote: > (responding to the 2020-02-21 0759pm mountain time post by Louis) > > (Ed earlier said) > > I asked about that number since some folks are skittish > > about revealing their actual IP addresses. > > Ed knows me well! > > I'm not sure which of all them sequences "ip add show" displays Louis is referring to, so here's the output, with digits after the first 2 groups of each sequence replaced with n's in most cases: > > > 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 > link/ether 30:85:nn:nn:nn:nn brd ff:ff:ff:ff:ff:ff > inet 67.172.nnn.nn/nn brd 67.172.nnn.nnn scope global dynamic noprefixroute eno1 > valid_lft 174956sec preferred_lft 174956sec > inet6 2001:558:nnnn:nn:nnnn:nnnn:nnnn:nnn/nnn scope global dynamic noprefixroute > valid_lft 318456sec preferred_lft 318456sec > inet6 fe80::nnnn:nnnn:nnnn:nnnn/nn scope link noprefixroute > valid_lft forever preferred_lft forever > > > I see "192.168.", but no "10." and no "172.16.". Does that mean it is an RFC1918, and that the modem does do NAT and the firewall? Am I understanding Louis correctly? What's the practical significance of this? You are a Comcast customer. Comcast owns 67.172.0.0 - 67.172.255.255 So, your IPv4 address is also a Public IP address the same way the IPv6 address is. Directly connected to the Internet with no NAT. Also, your modem does not have an internal Firewall. Therefore, the firewall on your system is vital. -- The key to getting good answers is to ask good questions. _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx