On 2020-02-10 21:36, Patrick O'Callaghan wrote: > On Mon, 2020-02-10 at 20:40 +0800, Ed Greshko wrote: >> On 2020-02-10 20:14, Patrick O'Callaghan wrote: >>> So I changed that to turn autoneg on and speed to 1000, and rebooted. >>> The system came up with no network, so I reverted the change. Clearly >>> that isn't the right way to do it. >>> >>> Recommendations are welcome. >> Well, I use network manager and my network-script for enp2s0 only has >> >> ETHTOOL_OPTS="autoneg on" >> >> Could be that if you have autoneg on and then specify other stuff that should be taken >> care of by the autoneg you cause issues. > I tried that (note that I've never touched that file before now so I > don't know where the settings originally came from) and now it does > come up, but is still running at 100Mbps. I rebooted both my box and > the router, but no difference. Both ends definitely support 1000Mbps > but my end now shows: > > $ sudo ethtool enp4s0 > Settings for enp4s0: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Supported pause frame use: Symmetric Receive-only > Supports auto-negotiation: Yes > Supported FEC modes: Not reported > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Advertised pause frame use: Symmetric Receive-only > Advertised auto-negotiation: Yes <---------------------* > Advertised FEC modes: Not reported > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: Symmetric Receive-only > Link partner advertised auto-negotiation: Yes > Link partner advertised FEC modes: Not reported > Speed: 100Mb/s <---------------------* > Duplex: Full > Port: MII > PHYAD: 0 > Transceiver: internal > Auto-negotiation: on <---------------------* > Supports Wake-on: pumbg > Wake-on: d > Current message level: 0x00000033 (51) > drv probe ifdown ifup > Link detected: yes > The key is.... Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full The other side is telling that it only supports 100Mb/s -- The key to getting good answers is to ask good questions. _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx