On 5/16/19 4:40 AM, Alex wrote: > Hi, > > I've just installed fedora30 desktop on a friend's computer for him. > It was installed and configured here before he brought it to his house > and connected it to his cable modem. Previously I had set up port > forwarding on his modem from port 8027 to port 8027 on his system for > web access and port 8022 to port 8022 on his system for remote ssh > access. > > I used the gnome network manager to configure networking and just > manually configured ssh to listen on port 8022 instead of the default. > > The problem is that, after bringing it back to his house and putting > it online, the default route was not added properly and the system was > unreachable until I stepped him through the process of adding it > manually. > > This is the command I had him run as root to configure the default route: > > # route add default gw 192.168.9.1 dev enp4s6 > > Here is that /etc/sysconfig/network-scripts/ifcfg-Wired_connection_2 config: > > HWADDR=00:0E:0C:3B:35:68 > TYPE=Ethernet > PROXY_METHOD=none > BROWSER_ONLY=no > BOOTPROTO=none > IPADDR=192.168.9.110 > PREFIX=24 > GATEWAY=192.168.9.1 > DEFROUTE=yes > IPV4_FAILURE_FATAL=no > IPV6INIT=yes > IPV6_AUTOCONF=yes > IPV6_DEFROUTE=yes > IPV6_FAILURE_FATAL=no > IPV6_ADDR_GEN_MODE=stable-privacy > NAME="Wired connection 2" > UUID=850cde8f-7dc2-364a-8911-e511cdbea2e4 > ONBOOT=yes > DNS1=8.8.4.4 > AUTOCONNECT_PRIORITY=-999 > > Is there something immediately identifiable that would prevent the > default route from working? > > Typically NAME and DEVICE are the name of the device, like enp4s6, but > they don't exist in this config. Is that what is missing? I can't > easily reboot this machine, so want to be sure before I do it. It would be best too know the conditions "before" and "after" the manual addition of the route. If it is working with the above it is hard to determine why it didn't work prior. -- Right: I dislike the default color scheme Wrong: What idiot picked the default color scheme _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
