On Tue, 26 Mar 2019 16:38:13 -0000 "Doug Herr" <fedoraproject.org@xxxxxxxxxxx> wrote: > After a dnf upgrade that included the new 5.x kernel I did my regular > check to make sure that the nvidia driver got built via akmod-nvidia- > 340xx-340.107-5.fc29.x86_64. It was not there, so I looked more > closely at the output of the 'dnf upgrade' and found that: > > > dracut: FAILED: /usr/lib/dracut/dracut-install -D > /var/tmp/dracut.ReYjXp/initramfs -H --kerneldir /lib/modules/5.0.3- > 200.fc29.x86_64/ -o -m =drivers/net/phy =drivers/ net/team > =drivers/net/ethernet ecb arc4 bridge stp llc ipv6 bonding 8021q > ipvlan macvlan af_packet virtio_net xennet > > > Full output is at: > https://paste.fedoraproject.org/paste/qKIPdK4OB8JGmGH6g8LQEA > > Line 234 is where it shows the issue. > > I have not yet rebooted, but I tend to assume that a reboot into my > current 4.20.16-200.fc29.x86_64 will still be fine but clearly it will > have trouble trying to boot to 5.x I think the new kernel version will require a new binary blob driver from nvidia. It probably just hasn't arrived yet, so you will have to use the previous kernel until it does. You could go to nvidia's website to see if it is there, and update it manually, but it is a lot easier to let the good folks at rpmfusion do the driving for you. _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
