Hi,
I have burnt a Fedora 29 workstation live install to DVD and tried
to boot it with the bios set to UEFI mode, but it halted with a boot
error. Thinking there might be an error with the DVD I downloaded a tool
for windows that allowed me to download and burn the F29 installer to
usb, but this failed to boot with the same issue as the DVD. If I
switched the bios into legacy mode both the DVD and USB successfully
booted to the Fedora desktop. From what I have read on the net the live
installer is dual setup, in terms of the documentation said that if the
installer was booted in UEFI mode it would perform a UEFI install and if
it was booted in legacy mode it would do a bios install, so given this
have I done something incorrectly to cause the installer to not boot in
UEFI mode?
Having set my hard disks up in Raid 10 mode I booted the F29
installer in bios mode which successfully booted to the desktop, where I
selected the install to hard disk option which worked fine up to the
point of setting up the disks, where the disk setup could not see any
disks at all to configure for installation. From what I've read on the
internet the workstation installers for F22 through F24 did not support
raid but the equivalent server installers did. Has this still not been
rectified up to the F29 workstation installer?
regards,
Steve
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
