On Thu, May 03, 2018 at 04:45:03PM -0700, Samuel Sieb wrote: ... > Try installing "dracut-config-generic" and then reinstall the F28 > kernel. Make sure that the initramfs timestamp is updated. The > file should also be larger after. If it still doesn't work, then > removing "quiet" and "rhgb" from the kernel command line might > provide some more info. The image was more than twice as big, but it did the same thing on boot With quiet and rhgb removed, it got to the point where it said: Reached target System Initialization. Reached target Basic System. Then it stopped saying anything. At 150 seconds after boot, it said: dracut-initqueue[434]: Warning: dracut-initqueue timeout - start timeout scripts It sat there until 287 seconds after boot and started giving the same message once or twice a second until at 357 seconds it said: dracut-initqueue[434]: Warning: Could not boot. There are a couple of audit messages, then: Warning: /dev/mapper/vg0-root does not exist Warning: /dev/vg0/root does not exist Warning: /dev/vg0/swap does not exist Generationg "/run/initramfs/rdsosreport.txt" Then it enters emergency mode. In journalctl, I see this and I think it is the problem: WARNING: PV W0e1Cx-ByMA-iRX6-OGxr-KfWC-zaUP-YXWgW5 on /dev/sdb8 was already found on sda8. WARNING: PV W0e1Cx-ByMA-iRX6-OGxr-KfWC-zaUP-YXWgW5 on /dev/md127 was already found on sda8. WARNING: PV W0e1Cx-ByMA-iRX6-OGxr-KfWC-zaUP-YXWgW5 prefers device /dev/sda8 because device was seen first. WARNING: PV W0e1Cx-ByMA-iRX6-OGxr-KfWC-zaUP-YXWgW5 prefers device /dev/md127 because device size is correct. Those repeat severeal times, then it says: Inactive '/dev/vg0/root' [13.20 GiB] inherit Inactive '/dev/vg0/swap' [2.00 GiB] inherit Inactive '/dev/vg0/home' [15.00 GiB] inherit Inactive '/dev/vg0/local' [1.00 GiB] inherit Inactive '/dev/vg0/big2' [29.00 GiB] inherit PARTIAL MODE. Incomplete logical volumes will be processed. > >I'm going to try booting a live cd (xfce f28 i386) and if that works > >I'll just reinstall. Otherwise I'll leave it like it is until I can > >get the machine cleaned out and shutdown for good. > > That's a good test as well. I'll try the live cd later. Thanks, Jim _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
