Bringing up F27 WS on an old laptop machine for a friend (at a hotspot):
Inserting the usb dongle (TP-Link....etc) suggested by a list member,
I see the following related output from dmesg:
852.412125] usb 2-3: RTL8192EU rev B (SMIC) 2T2R, TX queues 3,
WiFi=1, BT=0, GPS=0, HI PA=0
[ 852.412128] usb 2-3: RTL8192EU MAC: c0:25:e9:24:89:4b
[ 852.412132] usb 2-3: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 852.418196] usb 2-3: Firmware revision 19.0 (signature 0x92e1)
[ 853.482236] usbcore: registered new interface driver rtl8xxxu
[ 853.560282] rtl8xxxu 2-3:1.0 wlp0s29f7u3: renamed from wlan0
[ 853.582109] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 853.608374] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 853.706458] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 853.776900] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1189.062735] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1189.176409] perf: interrupt took too long (2508 > 2500), lowering
kernel.perf_event_max_sample_rate to 79000
[ 1189.946239] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1189.973518] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1190.176087] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1190.384129] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1190.592073] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1191.507533] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1191.531543] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1191.736124] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1191.943124] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1192.144044] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1199.258753] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1199.292526] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1199.496079] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1199.704116] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1199.912058] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1201.731094] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1201.754444] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1201.960221] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1202.168152] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1202.376113] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1212.205597] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1212.219305] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1212.424234] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1212.627823] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1212.832128] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1214.006859] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1214.158558] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1291.903421] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1292.758630] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1292.783578] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1292.984232] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1293.192083] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1293.400267] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1310.050651] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1310.074951] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1310.280325] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1310.488274] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1310.696065] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1317.005842] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1317.244762] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1342.409315] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1343.256858] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1343.283464] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1343.488231] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1343.696066] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1343.903683] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1354.729605] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1354.755107] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1354.960087] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1355.167574] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1355.368082] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1368.006979] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1368.271656] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1521.989413] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1522.845405] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1522.868497] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1523.072242] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1523.280256] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1523.488267] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1530.899657] perf: interrupt took too long (3169 > 3135), lowering
kernel.perf_event_max_sample_rate to 63000
[ 1534.315478] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1534.337990] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1534.544243] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1534.752242] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1534.960124] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1547.004320] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1547.249854] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1855.726166] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1904.851797] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1905.727766] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1905.756214] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1905.960286] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1906.168264] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1906.376268] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1917.204464] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1917.228092] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1917.432223] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1917.640286] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1917.848278] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1930.006380] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1930.272334] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1946.474738] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1947.324982] wlp0s29f7u3: authenticate with 24:de:c6:64:90:d0
[ 1947.352292] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 1/3)
[ 1947.560068] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 2/3)
[ 1947.768279] wlp0s29f7u3: send auth to 24:de:c6:64:90:d0 (try 3/3)
[ 1947.976083] wlp0s29f7u3: authentication with 24:de:c6:64:90:d0 timed out
[ 1972.006471] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
[ 1972.248992] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u3: link is not ready
$ ifconfig
enp9s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:21:70:7e:2f:a6 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 9168 bytes 823200 (803.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 9168 bytes 823200 (803.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp0s29f7u3: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether c0:25:e9:24:89:4b txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
So, for some reason, it is not able to shake hands with the hotspot wifi
router.
The machine has it's own built-in Broadcom wifi, which f27 has NO
drivers for, and NO firmware for :( :( :(
to wit:
lspci | grep -i wireless
0c:00.0 Network controller: Broadcom Limited BCM4322 802.11a/b/g/n
Wireless LAN Controller (rev 01)
The links I ave received so far about this chipset have not provided
ready to install packages.
Almost every link I visited, requires builds and reboots.
I am loath to tainting this installation.
So, I am unable to
1. run updates
2. install the full MATE DT.
3. Install other rpms my friend needs.
Using the f27 gui to bring up the usb wifi (to connect with Starbucks
router)
keeps timing out.
On my own laptop, which uses the internal Intel WIFI 5100, I am not
getting the timeout.
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
