I have been poking at this for some hours, and by now I could use a second opinion. Or clue. Thirteen black candles? Somehow, when I sit on a F27 machine and pull from a F26 machine using rsync, something extremely inefficient happens in the F26 machine. If I sit on a F26 machine and pull from the F26 machine, it is fast. The good state: --------------- I had 3 reasonable machines, all on F26: Server - 1.8Ghz Haswell-celeron dualcore Desktop - 3.2GHz Haswell Backup - 2.4GHz Core2Q Backup runs rsync, and pulls from Server and Desktop using ssh. Nothing fancy, it copies and shuts itself down. When Backup was reading from Server, Server would have about - 30% cpu to rsync - 60% cpu to ssh and deliver 100MB/s reliably. So does Desktop. The bad state: -------------- After one such rsync run, I upgraded Backup to F27. When Backup pulls from Server, Server shows: - 99% cpu to rsync - 6% cpu to ssh and it delivers **11MB/s**, one tenth of what it did before. So, 30x higher cpu load per byte delivered. So, somehow, the rsync running on F27, which by the way reports the same version and capabilities as the one on F26, triggers something in the spawned process that behaves differently. On the server, the ssh-spawned rsync process looks the same whether it is Backup or Desktop pulling from it: On Server, with Backup as client, 11MB/s: root 25042 34.4 0.0 124996 5620 ? Rs 18:54 0:40 rsync --server --sender -vlogDtpre.iLsfxC . /bulk/mux/media/xbn-2017_10_29_010103.m.ts /bulk/mux/media/xbn-2017_11_04_235600.m.ts /bulk/mux/media/xbn-2017_11_12_005938.m.ts /bulk/mux/media/xbn-2017_11_12_011442.m.ts /bulk/mux/media/xbn-2017_11_12_015031.m.ts On server, with Desktop as client, 100MB/s: root 25152 31.9 0.0 122344 3000 ? Rs 18:56 0:05 rsync --server --sender -vlogDtpre.iLsfxC . /bulk/mux/media/xbn-2017_10_29_010103.m.ts /bulk/mux/media/xbn-2017_11_04_235600.m.ts /bulk/mux/media/xbn-2017_11_12_005938.m.ts /bulk/mux/media/xbn-2017_11_12_011442.m.ts /bulk/mux/media/xbn-2017_11_12_015031.m.ts The command being run on Backup or Desktop is: rsync -av -e 'ssh -i id_ecdsa' --exclude XA/ --exclude video2/ root@10.5.5.1:/bulk/mux/media/xbn* . --progress Things I did: ------------- Tried the still-installed F26 and F25 kernels Desktop (F26) can rsync to and from Server(F26) at full speed. All machines get 110MB/s when running iperf, all six ways. The Sky2 nic in Backup is not spewing errors iperf shows no dropped. Swapped switchports between Desktop and Backup Switch does not report errors Things to do: ------------- swap nics upgrade a sacrificial F26 machine to F27 and try from that /Kasper Pedersen _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
