On 08/09/2017 11:52 AM, D&R wrote: > When I boot into the install there is an error in the destination section. > > I looked at the debug info in the storage.log and there was an > error about sdb1 did not exist. But... > > When I reboot to F24 then ... > > cat /proc/mdstat > > md126 : active raid1 sda2[2] sdb2[1] > 961261568 blocks super 1.2 [2/2] [UU] > bitmap: 2/8 pages [8KB], 65536KB chunk > > md127 : active raid1 sdb1[1] sda1[2] > 15368064 blocks super 1.0 [2/2] [UU] > bitmap: 1/1 pages [4KB], 65536KB chunk > > The section of ks.cfg for hard drive setup is as follows: > > ignoredisk --only-use=sda,sdb > bootloader --location=mbr --boot-drive=sda > > # Partition clearing information > clearpart --none --initlabel > > # Disk partitioning information > > part raid.6 --fstype=mdmember --noformat --onpart=sda1 > part raid.27 --fstype=mdmember --noformat --onpart=sdb1 > part raid.14 --fstype=mdmember --noformat --onpart=sda2 > part raid.32 --fstype=mdmember --noformat --onpart=sdb2 > > raid / --device=root --fstype=ext4 --level=raid1 --useexisting > raid /home --device=home --fstype=ext4 --level=raid1 --noformat --useexisting > > I currently have a raid1 setup with 2 drives sda and sdb > > Since I am using the option --useexisting do I still need to use the part > commands? > > The last time I did an upgrade was to F24 I have not found anything that says > the syntax has changed. > > Any Ideas? Uhm, when you're booting the install, is it possible that the CD/DVD you're booting from becomes /dev/sda? If so, then your first hard drive is /dev/sdb and the second is /dev/sdc and the ignoredisk --only-use=sda,sdb would block using the second hard drive, since it's /dev/sdc at this time. This is just a wild guess. ---------------------------------------------------------------------- - Rick Stevens, Systems Engineer, AllDigital ricks@xxxxxxxxxxxxxx - - AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 - - - - If your broker is so damned smart...why is he still working? - ---------------------------------------------------------------------- _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
