On 01/27/17 17:18, Ed Greshko wrote:
Well, can you view the webpage?
+
No, assuming you refer to the web page
in the camera, it seems to be a flash
display that requires those "plugins"
installed. I can only see the entry page
listing the four items as you said were
shown in the manual.
And if you can, is there a "network settings" page where
you can enable "Onvif" to enable the RTSP port? This is noted in the Wiki page as posted
by poma. I didn't see you respond to that or indicate that you've done that bit of setup.
+
Sorry about not responding to Poma but I
couldn't see what he was getting at,
this seemed like common knowledge, one
of the first things I found was the port
88 requirement:
"On newer firmware for the C1 you need
to enable "Onvif" in the network
settings to enable the RTSP port. This
can be done by accessing the local
webpage for the IP address and port 88
(http://x.x.x.x:88)"
I had nothing to say and didn't respond
although I always appreciate his
comments/help.
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-25/64bit LINUX XFCE Fastmail POP3
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
