On 09/17/2016 08:13 PM, stan wrote:
On Sat, 17 Sep 2016 18:59:10 -0600
jd1008 <jd1008@xxxxxxxxx> wrote:
What is the driver's (or drivers') name (or names) for RT3072
which a usb dongle.
This should get you going - rt2800usb
https://wireless.wiki.kernel.org/en/users/drivers/rt2800usb
OK, so I rebooted and then plugged in the rt3702 dongle
dmesg shows:
[ 3270.106423] usb 4-1.2: new high-speed USB device number 14 using ehci-pci
[ 3270.210079] usb 4-1.2: New USB device found, idVendor=148f,
idProduct=3072
[ 3270.210085] usb 4-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3270.210088] usb 4-1.2: Product: 802.11 n WLAN
[ 3270.210091] usb 4-1.2: Manufacturer: Ralink
[ 3270.210094] usb 4-1.2: SerialNumber: 1.0
[ 3270.212400]
=== pAd = ffffc90018175000, size = 598032 ===
[ 3270.212458] <-- RTMPAllocAdapterBlock, Status=0
[ 3270.213176] NVM is EFUSE
Yet, there is no interface for ifcfg to play with :(
ifcfg shows only:
ifconfig
em1: f
lo:
virbr0:
wlp2s0b1: <<<< This is built-in to the mobo:
02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n
(rev 01) <<< built-in to mobo.
So, the dongle is not visible to what???? It's driver?
It's driver module is loaded. To wit:
$ lsmod | grep rt5572sta
rt5572sta 810817 0
Notice the driver module has no client drivers attached to it (as
indicated by the trailing 0).
PS: The driver source code does not name the driver module as rt3072.ko
, So, it is not clear to me if it actually built a driver for that chipset.
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
