Il 26/05/2016 18:51, Samuel Sieb ha scritto:
On 05/26/2016 08:16 AM, gil wrote:
Il 26/05/2016 07:17, Samuel Sieb ha scritto:
On 05/25/2016 10:10 PM, gil wrote:
Il 26/05/2016 00:11, Samuel Sieb ha scritto:
What does "aplay -l" show now?
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
Ok, so it did work. You now only have one device. If it's still not
working, I really have no more suggestions...
open a bug? but for which component? kernel, pulseaudio, xorg-n-d ... ?
hi
It's not pulseaudio because a direct aplay to the device doesn't
generate sound. That leaves it as a alsa/kernel module issue, so file
it on the kernel for now. The really strange part is that aplay
works, but there is no sound.
"aplay -D plughw:0,0 <soundfile>" still works, but you don't hear
anything?
nothing ...
(You might have to kill pulseaudio first.) I'm still wondering if you
accidentally changed something else when you took your computer apart.
This is another problem when try to kill pulseaudio
return this (i dont know the cause)
$ pulseaudio -k
(also with $ killall pulseaudio)
$ aplay /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit
Little Endian, Rate 48000 Hz, Mono
NO sound in my speakers
$ pulseaudio -vvv
*
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed.
was not killed?
tried also with
$ pacmd list-cards
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_14.2>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xfcdf8000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc.
[AMD/ATI]"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Stereo analogico input (priority
60, available: unknown)
output:analog-stereo: Stereo analogico output (priority
6000, available: unknown)
output:analog-stereo+input:analog-stereo: Duplex stereo
analogico (priority 6060, available: unknown)
output:analog-surround-21: Surround analogico 2.1
output (priority 800, available: unknown)
output:analog-surround-21+input:analog-stereo: Surround
analogico 2.1 output + Stereo analogico input (priority 860, available:
unknown)
output:analog-surround-40: Surround analogico 4.0
output (priority 700, available: unknown)
output:analog-surround-40+input:analog-stereo: Surround
analogico 4.0 output + Stereo analogico input (priority 760, available:
unknown)
output:analog-surround-41: Surround analogico 4.1
output (priority 800, available: unknown)
output:analog-surround-41+input:analog-stereo: Surround
analogico 4.1 output + Stereo analogico input (priority 860, available:
unknown)
output:analog-surround-50: Surround analogico 5.0
output (priority 700, available: unknown)
output:analog-surround-50+input:analog-stereo: Surround
analogico 5.0 output + Stereo analogico input (priority 760, available:
unknown)
output:analog-surround-51: Surround analogico 5.1
output (priority 800, available: unknown)
output:analog-surround-51+input:analog-stereo: Surround
analogico 5.1 output + Stereo analogico input (priority 860, available:
unknown)
output:analog-surround-71: Analog Surround 7.1 output
(priority 700, available: unknown)
output:analog-surround-71+input:analog-stereo: Analog
Surround 7.1 output + Stereo analogico input (priority 760, available:
unknown)
output:iec958-stereo: Stereo digitale (IEC958) output
(priority 5500, available: unknown)
output:iec958-stereo+input:analog-stereo: Stereo
digitale (IEC958) output + Stereo analogico input (priority 5560,
available: unknown)
off: Spento (priority 0, available: unknown)
active profile: <output:analog-stereo>
sinks:
alsa_output.pci-0000_00_14.2.analog-stereo/#0: Audio
interno Stereo analogico
sources:
alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#0: Monitor of Audio
interno Stereo analogico
ports:
analog-input-front-mic: Microfono anteriore (priority
8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Microfono posteriore (priority
8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency
offset 0 usec, available: no)
properties:
analog-output-lineout: Linea out (priority 9900,
latency offset 0 usec, available: no)
properties:
analog-output-headphones: Cuffie analogiche (priority
9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
iec958-stereo-output: Output digitale (S/PDIF)
(priority 0, latency offset 0 usec, available: unknown)
properties:
$ pacmd set-card-profile 0 output:analog-stereo
thanks
regards
.g
* rest of pulseaudio -vvv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed:
Operazione non permessa
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed:
Operazione non permessa
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 7.1
D: [pulseaudio] main.c: Compilation host: i686-redhat-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -O2 -g -pipe -Wall
-Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches
-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m32 -march=i686
-mtune=atom -fasynchronous-unwind-tables -W -Wextra -Wno-long-long
-Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2
-Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs
-Wformat-nonliteral -Wpointer-arith -Winit-self
-Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes
-Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow
-Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings
-Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
-fdiagnostics-color=auto
D: [pulseaudio] main.c: Running on host: Linux i686 4.4.9-300.fc23.i686
#1 SMP Thu May 5 00:26:01 UTC 2016
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 3aae04d28f9b42c7970007bfd8d2e2e9.
I: [pulseaudio] main.c: Session ID is 1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/gil/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-7.1/modules.
I: [pulseaudio] main.c: Running in system mode: no
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
