On 2016.05.24 15:45, Chris Murphy wrote: > On Mon, May 23, 2016 at 11:13 PM, Bill Perkins <bp241@xxxxxxxxxxx> > wrote: > > > > I have this system that I have been using that was running Fedora > 21. > > I just updated it today (Monday) to Fedora 22. It is an old Dell > > Optiplex GX620 with two 2TB disk drives set up with two partitions > > each in a RAID One configuration. LVM2 runs on top of the second > > partition with several logical volumes. This system had been > running > > just fine before I did the upgrade. After the upgrade, the system > will > > not boot using one of the new Fedora 22 kernels. It boots just > fine > > using one of the old Fedora 21 kernels that did not get replaced > during > > the upgrade. > > > > I can get the system up using one of the new kernels, but I have to > > wait until it stops at a Dracut prompt. I then manual run "mdadm > -- > > assemble --scan" to get the RAID One partitions assembled, and "lvm > > vgchange -a y" to get the Volume Group built. After that, I issue > an > > "exit" and the system completes the boot process. I need to figure > out > > why this system will not boot without intervention. Any > suggestions > > would be appreciated. > > > > I have tried to rebuild the initramfs with dracut, no joy doing > that. > > > > Here is some of the data: > > > > # cat /etc/mdadm.conf > > MAILADDR root > > AUTO +imsm +1.x -all > > ARRAY /dev/md0 metadata=0.90 > UUID=c45384af:aa8fc7ca:7eebaeb8:f0ca1523 > > ARRAY /dev/md1 metadata=1.2 name=test3.localnet:md1 > > UUID=524079c6:521ca76f:126164a9:3232e116 > > > > # cat /etc/fstab > > UUID=5a1848ce-cff6-4c1f-a622-dc1fe5f06d55 /boot ext3 defaults 1 2 > > UUID=762b53d0-b5a0-41dc-b804-d339fa58b119 swap swap defaults 0 0 > > /dev/mapper/vg0-lv1 / ext4 defaults 1 1 > > /dev/mapper/vg0-lv2 /usr/local ext4 defaults 1 2 > > /dev/mapper/vg0-lv3 /var ext4 defaults 1 2 > > /dev/mapper/vg0-lv4 /tmp ext4 defaults 1 2 > > /dev/mapper/vg0-lv5 /opt ext4 defaults 1 2 > > /dev/mapper/vg0-lv6 /home ext4 defaults 1 2 > > /dev/mapper/vg0-lv7 /work ext4 defaults 1 2 > > /dev/sr0 /cd0 auto noauto,owner,user,ro 0 0 > > > > # uname -a > > Linux redwood 4.4.9-200.fc22.x86_64 #1 SMP Fri May 6 17:42:20 UTC > 2016 > > x86_64 x86_64 x86_64 GNU/Linux > > Can you put up journalctl -b somewhere? > > > -- > Chris Murphy > > Chris, This link should work: http://roo.grnwood.net/redwood-journal-b-160524.gz Gzip file is 692,498 bytes. Original file is 11,702,620 bytes. Thank you for looking at this problem. Bill -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: http://lists.fedoraproject.org/admin/lists/users@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
