On Sun, 2015-11-22 at 17:00 -0500, sinthia.vee wrote: > If you are on a desktop system drive numbering is determined by which > ribbon cable is plugged in. The boot disk will be at position 0 on > the primary cable. It is likely the first drive on your list. Only if you have cable select, and your BIOS hasn't been previously configured to boot from something else. That's an assumption that can lead you to play with the wrong drive. > If you are so inclined, you can disconnect the other drives > temporarily in order to add them one at a time and see what you have. If you really can't tell which drive is which, this is the safest option. Afterwards, label your drives so you don't have to go down the disassembly route, again. Write onto the drive where you can see it without disassembly (use white texta if the drive is black), enough unique numbers from the drive's product code, or serial number, that tally with what Linux reads using software. So next time, you only have to lift the lid. You might want to label the outside of the box, too. -- tim@localhost ~]$ uname -rsvp Linux 3.19.8-100.fc20.i686 #1 SMP Tue May 12 17:42:35 UTC 2015 i686 All mail to my mailbox is automatically deleted, there is no point trying to privately email me, I will only read messages posted to the public lists. George Orwell's '1984' was supposed to be a warning against tyranny, not a set of instructions for supposedly democratic governments. -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
