I have attached the output of smartctl -x /dev/sde
Fortunately there is nothing important on this drive.
Paolo
On 10/27/2015 11:59 AM, Gordon Messmer wrote:
On 10/27/2015 10:39 AM, Paolo Galtieri wrote:
I have unmounted the filesystems and run fsck on them and fsck
reports no errors.
Bear in mind that fsck only checks the filesystem structure. It does
not verify that the data in your files is complete or correct. The
filesystem structure itself occupies a very small percentage of your
disk space. The 16 bad sectors might be within your data files, in
which case those files may now be corrupt.
If you have backups, it would be a good idea to compare as many files
to known good backups as possible, after replacing the drive.
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.3-200.fc22.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1500LM003-9YH148
Serial Number: W110C6CD
LU WWN Device Id: 5 000c50 0495eb7ff
Firmware Version: CC9F
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Oct 27 11:58:32 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 208 (intermediate), recommended: 208
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 656) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 368) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 123 099 006 - 1088593818
3 Spin_Up_Time PO---- 095 088 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1273
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 075 060 030 - 34385725
9 Power_On_Hours -O--CK 072 072 000 - 25275
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1061
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 098 098 000 - 2
188 Command_Timeout -O--CK 100 099 000 - 4295032833
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 059 044 045 Past 41 (Min/Max 40/42 #38)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 370
193 Load_Cycle_Count -O--CK 100 100 000 - 1275
194 Temperature_Celsius -O---K 041 056 000 - 41 (0 13 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 030 027 000 - 1088593818
197 Current_Pending_Sector -O--C- 100 100 000 - 16
198 Offline_Uncorrectable ----C- 100 100 000 - 16
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 25309 (37 75 0)
241 Total_LBAs_Written ------ 100 253 000 - 2141855771
242 Total_LBAs_Read ------ 100 253 000 - 2135375819
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16)
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x80-0x9f SL R/W 16 Host vendor specific log
0xa1 SL VS 20 Device vendor specific log
0xa8 SL VS 20 Device vendor specific log
0xa9 SL VS 1 Device vendor specific log
0xc0 SL VS 1 Device vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 24708 hours (1029 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 08 ff ff ff 4f 00 05:39:49.263 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.218 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.217 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.216 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.216 READ DMA EXT
Error 1 occurred at disk power-on lifetime: 24708 hours (1029 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 f0 ff ff ff 4f 00 05:39:46.548 READ DMA EXT
25 d0 10 ff ff ff 4f 00 05:39:46.546 READ DMA EXT
25 d0 f0 ff ff ff 4f 00 05:39:46.542 READ DMA EXT
25 d0 10 ff ff ff 4f 00 05:39:46.541 READ DMA EXT
25 d0 f0 ff ff ff 4f 00 05:39:46.537 READ DMA EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 40/42 Celsius
Lifetime Min/Max Temperature: 13/56 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (110)
Index Estimated Time Temperature Celsius
111 2015-10-22 06:21 40 *********************
112 2015-10-22 07:20 40 *********************
113 2015-10-22 08:19 40 *********************
114 2015-10-22 09:18 41 **********************
115 2015-10-22 10:17 42 ***********************
116 2015-10-22 11:16 43 ************************
117 2015-10-22 12:15 43 ************************
118 2015-10-22 13:14 44 *************************
119 2015-10-22 14:13 44 *************************
120 2015-10-22 15:12 ? -
121 2015-10-22 16:11 44 *************************
... ..( 3 skipped). .. *************************
125 2015-10-22 20:07 44 *************************
126 2015-10-22 21:06 43 ************************
127 2015-10-22 22:05 43 ************************
0 2015-10-22 23:04 43 ************************
1 2015-10-23 00:03 42 ***********************
2 2015-10-23 01:02 42 ***********************
3 2015-10-23 02:01 42 ***********************
4 2015-10-23 03:00 41 **********************
5 2015-10-23 03:59 41 **********************
6 2015-10-23 04:58 41 **********************
7 2015-10-23 05:57 40 *********************
8 2015-10-23 06:56 40 *********************
9 2015-10-23 07:55 41 **********************
10 2015-10-23 08:54 41 **********************
11 2015-10-23 09:53 41 **********************
12 2015-10-23 10:52 42 ***********************
13 2015-10-23 11:51 42 ***********************
14 2015-10-23 12:50 43 ************************
15 2015-10-23 13:49 43 ************************
16 2015-10-23 14:48 43 ************************
17 2015-10-23 15:47 44 *************************
... ..( 3 skipped). .. *************************
21 2015-10-23 19:43 44 *************************
22 2015-10-23 20:42 43 ************************
23 2015-10-23 21:41 43 ************************
24 2015-10-23 22:40 43 ************************
25 2015-10-23 23:39 42 ***********************
... ..( 3 skipped). .. ***********************
29 2015-10-24 03:35 42 ***********************
30 2015-10-24 04:34 41 **********************
... ..( 5 skipped). .. **********************
36 2015-10-24 10:28 41 **********************
37 2015-10-24 11:27 42 ***********************
38 2015-10-24 12:26 42 ***********************
39 2015-10-24 13:25 43 ************************
40 2015-10-24 14:24 43 ************************
41 2015-10-24 15:23 43 ************************
42 2015-10-24 16:22 44 *************************
43 2015-10-24 17:21 44 *************************
44 2015-10-24 18:20 43 ************************
45 2015-10-24 19:19 43 ************************
46 2015-10-24 20:18 42 ***********************
47 2015-10-24 21:17 42 ***********************
48 2015-10-24 22:16 42 ***********************
49 2015-10-24 23:15 41 **********************
50 2015-10-25 00:14 41 **********************
51 2015-10-25 01:13 40 *********************
52 2015-10-25 02:12 40 *********************
53 2015-10-25 03:11 40 *********************
54 2015-10-25 04:10 39 ********************
55 2015-10-25 05:09 39 ********************
56 2015-10-25 06:08 39 ********************
57 2015-10-25 07:07 40 *********************
58 2015-10-25 08:06 41 **********************
59 2015-10-25 09:05 41 **********************
60 2015-10-25 10:04 41 **********************
61 2015-10-25 11:03 42 ***********************
62 2015-10-25 12:02 43 ************************
... ..( 2 skipped). .. ************************
65 2015-10-25 14:59 43 ************************
66 2015-10-25 15:58 44 *************************
67 2015-10-25 16:57 44 *************************
68 2015-10-25 17:56 43 ************************
69 2015-10-25 18:55 43 ************************
70 2015-10-25 19:54 43 ************************
71 2015-10-25 20:53 42 ***********************
72 2015-10-25 21:52 42 ***********************
73 2015-10-25 22:51 41 **********************
74 2015-10-25 23:50 41 **********************
75 2015-10-26 00:49 41 **********************
76 2015-10-26 01:48 40 *********************
... ..( 3 skipped). .. *********************
80 2015-10-26 05:44 40 *********************
81 2015-10-26 06:43 41 **********************
82 2015-10-26 07:42 40 *********************
83 2015-10-26 08:41 40 *********************
84 2015-10-26 09:40 41 **********************
85 2015-10-26 10:39 42 ***********************
86 2015-10-26 11:38 42 ***********************
87 2015-10-26 12:37 43 ************************
88 2015-10-26 13:36 44 *************************
89 2015-10-26 14:35 44 *************************
90 2015-10-26 15:34 45 **************************
... ..( 2 skipped). .. **************************
93 2015-10-26 18:31 45 **************************
94 2015-10-26 19:30 44 *************************
... ..( 2 skipped). .. *************************
97 2015-10-26 22:27 44 *************************
98 2015-10-26 23:26 43 ************************
99 2015-10-27 00:25 43 ************************
100 2015-10-27 01:24 42 ***********************
... ..( 2 skipped). .. ***********************
103 2015-10-27 04:21 42 ***********************
104 2015-10-27 05:20 41 **********************
105 2015-10-27 06:19 ? -
106 2015-10-27 07:18 41 **********************
... ..( 2 skipped). .. **********************
109 2015-10-27 10:15 41 **********************
110 2015-10-27 11:14 42 ***********************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16)
Read SATA Phy Event Counters failed
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
