On 09/14/2015 06:52 PM, Susi Lehtola wrote:
On 09/14/2015 01:04 PM, jd1008 wrote:
On a laptop with
02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n
(rev 01)
and kernel: kernel-4.3.0-0.rc0.git11.1
and compiled modules:
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/net/phy/bcm7xxx.ko.xz
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/net/phy/bcm87xx.ko.xz
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/net/dsa/bcm_sf2.ko.xz
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/net/wireless/brcm80211/brcmfmac
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko.xz
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/net/wireless/brcm80211/brcmutil
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko.xz
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/bluetooth/bcm203x.ko.xz
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/bcma
/lib/modules/4.3.0-0.rc0.git11.1.fc20.x86_64/kernel/drivers/bcma/bcma.ko.xz
the wifi will not come on.
Yes, I know the kernel I mention above is a release candidate, but I
also tested released kernel 4.2.0
and it also does not support this wifi.
What does dmesg say?
Do you have the necessary firmware installed?
All the firmware is installed.
Dmesg shows my device
dmesg | egrep 'bcm|brcm'
[ 23.663122] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and
package 0x0A
[ 23.668951] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id
0x800, rev 0x22, class 0x0)
[ 23.673722] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id
0x812, rev 0x17, class 0x0)
[ 23.679369] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820,
rev 0x0F, class 0x0)
[ 23.698791] bcma: bus0: Bus registered
[ 25.411675] b43: probe of bcma0:0 failed with error -524
[ 25.890922] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17
[ 45.686118] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos
enabled: false (implement)
[ 45.702539] brcmsmac bcma0:0: brcms_ops_config: change power-save
mode: false (implement)
[ 77.027787] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
associated
[ 77.027796] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos
enabled: true (implement)
[ 77.337182] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp
filtering: 1 addresses (implement)
[ 251.739996] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 361.915723] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1303.788174] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1366.973185] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1373.431674] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1479.850097] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1564.979716] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp
filtering: 1 addresses (implement)
[ 1605.443024] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1853.364640] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1865.380577] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1919.400890] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 2906.144794] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp
filtering: 1 addresses (implement)
[ 3516.401120] brcmsmac bcma0:0: START: tid 1 is not agg'able
So, it appears that even if I wait for Fedora 23, it will not support my
wifi.
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
