On 07/03/2015 04:25 PM, Chris Murphy wrote:
Given how many reinstalls you've done, I suspect a hardware problem.
Instead of waiting for it to happen again, you could do two things.
Post the output from
smartctl -x /dev/sdX ###where X is the letter for the drive that
you've installed Fedora
And after that, over the weekend if you can afford to be without the
use of this computer, run memtest86+ as long as you can stand it.
Sometimes it takes days for problems to show up.
I ran memtest86+ for 30 hours. No errors were found.
Here is the output from smartctl -x /dev/sda:
smartctl 6.2 2014-07-16 r3952 [x86_64-linux-4.0.6-200.fc21.x86_64]
(local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST500DM002-1BD142
Serial Number: W3TEGX3B
LU WWN Device Id: 5 000c50 07d130b7d
Firmware Version: KC48
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jul 5 17:08:56 2015 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 208 (intermediate), recommended: 208
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 87) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 110 099 006 - 27448144
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 37
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 063 060 030 - 1927500
9 Power_On_Hours -O--CK 100 100 000 - 155
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 37
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0 0 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 067 063 045 - 33 (Min/Max
33/35)
194 Temperature_Celsius -O---K 033 040 000 - 33 (0 24 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 060 039 000 - 27448144
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 155h+35m+47.085s
241 Total_LBAs_Written ------ 100 253 000 - 2664640084
242 Total_LBAs_Read ------ 100 253 000 - 3421058523
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 2928 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 123 -
# 2 Short offline Completed without error 00% 122 -
# 3 Short offline Completed without error 00% 65 -
# 4 Short offline Completed without error 00% 41 -
# 5 Short offline Completed without error 00% 17 -
# 6 Short offline Completed without error 00% 6 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 32/35 Celsius
Lifetime Min/Max Temperature: 24/48 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (92)
Index Estimated Time Temperature Celsius
93 2015-06-30 11:40 25 ******
94 2015-06-30 12:39 ? -
95 2015-06-30 13:38 26 *******
96 2015-06-30 14:37 ? -
97 2015-06-30 15:36 27 ********
98 2015-06-30 16:35 ? -
99 2015-06-30 17:34 25 ******
100 2015-06-30 18:33 ? -
101 2015-06-30 19:32 27 ********
102 2015-06-30 20:31 ? -
103 2015-06-30 21:30 30 ***********
104 2015-06-30 22:29 ? -
105 2015-06-30 23:28 24 *****
106 2015-07-01 00:27 ? -
107 2015-07-01 01:26 27 ********
108 2015-07-01 02:25 ? -
109 2015-07-01 03:24 24 *****
110 2015-07-01 04:23 ? -
111 2015-07-01 05:22 25 ******
112 2015-07-01 06:21 ? -
113 2015-07-01 07:20 31 ************
114 2015-07-01 08:19 ? -
115 2015-07-01 09:18 34 ***************
116 2015-07-01 10:17 ? -
117 2015-07-01 11:16 34 ***************
118 2015-07-01 12:15 ? -
119 2015-07-01 13:14 27 ********
120 2015-07-01 14:13 ? -
121 2015-07-01 15:12 31 ************
122 2015-07-01 16:11 ? -
123 2015-07-01 17:10 30 ***********
124 2015-07-01 18:09 ? -
125 2015-07-01 19:08 32 *************
126 2015-07-01 20:07 ? -
127 2015-07-01 21:06 27 ********
0 2015-07-01 22:05 ? -
1 2015-07-01 23:04 29 **********
2 2015-07-02 00:03 ? -
3 2015-07-02 01:02 24 *****
4 2015-07-02 02:01 ? -
5 2015-07-02 03:00 28 *********
6 2015-07-02 03:59 ? -
7 2015-07-02 04:58 34 ***************
8 2015-07-02 05:57 ? -
9 2015-07-02 06:56 28 *********
10 2015-07-02 07:55 34 ***************
11 2015-07-02 08:54 35 ****************
12 2015-07-02 09:53 33 **************
13 2015-07-02 10:52 33 **************
14 2015-07-02 11:51 34 ***************
15 2015-07-02 12:50 33 **************
16 2015-07-02 13:49 33 **************
17 2015-07-02 14:48 33 **************
18 2015-07-02 15:47 35 ****************
19 2015-07-02 16:46 ? -
20 2015-07-02 17:45 29 **********
21 2015-07-02 18:44 34 ***************
... ..( 5 skipped). .. ***************
27 2015-07-03 00:38 34 ***************
28 2015-07-03 01:37 35 ****************
29 2015-07-03 02:36 34 ***************
30 2015-07-03 03:35 34 ***************
31 2015-07-03 04:34 34 ***************
32 2015-07-03 05:33 33 **************
33 2015-07-03 06:32 34 ***************
34 2015-07-03 07:31 33 **************
... ..( 7 skipped). .. **************
42 2015-07-03 15:23 33 **************
43 2015-07-03 16:22 34 ***************
44 2015-07-03 17:21 33 **************
... ..( 3 skipped). .. **************
48 2015-07-03 21:17 33 **************
49 2015-07-03 22:16 34 ***************
50 2015-07-03 23:15 34 ***************
51 2015-07-04 00:14 34 ***************
52 2015-07-04 01:13 35 ****************
53 2015-07-04 02:12 34 ***************
54 2015-07-04 03:11 34 ***************
55 2015-07-04 04:10 35 ****************
56 2015-07-04 05:09 34 ***************
57 2015-07-04 06:08 34 ***************
58 2015-07-04 07:07 34 ***************
59 2015-07-04 08:06 37 ******************
60 2015-07-04 09:05 ? -
61 2015-07-04 10:04 35 ****************
62 2015-07-04 11:03 34 ***************
... ..( 2 skipped). .. ***************
65 2015-07-04 14:00 34 ***************
66 2015-07-04 14:59 33 **************
67 2015-07-04 15:58 34 ***************
68 2015-07-04 16:57 33 **************
... ..( 23 skipped). .. **************
92 2015-07-05 16:33 33 **************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
