On 29/04/15 22:05, Rick Stevens wrote:
On 04/29/2015 07:00 PM, Rick Stevens wrote:
Bob, buy a MicroSD card that comes with the adapter to convert it to
a normal SD card and get that SD<---->USB dongle.
1. Plug the MicroSD card into its adapter.
2. Plug the SD card adapter (with MicroSD card in it) into the USB
dongle.
3. Plug the dongle into your desktop computer and note which device the
SD card shows up as (probably /dev/sdb, but have a look at the output
of dmesg to be sure).
4. Download the ISO that you want.
5. As root, "dd if=name-of-iso-file.iso of=/dev/sdb bs=1M" (assuming the
SD card shows up as /dev/sdb...change as needed)
6. When dd ends, unplug the USB dongle, pull out the SD card adapter,
pull the MicroSD from the adapter, stick it in your RPi and power up the
RPi.
7. Voila!
.
.
Ok, I give up, what do I do next?
I have a card reader with a GE brand name on it
[root@box10 ~]# lsusb
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
And I see the following for sdd through sdg -
[root@box10 ~]# ll /dev/sdd
brw-rw----. 1 root disk 8, 48 May 1 10:10 /dev/sdd
Which I imagine relate to receptacles on the device. First I have no
idea which /dev/sdx is the one the micro-SD in adapter is plugged into
or how to identify it? Also I am not confident that the SD device is
even being recognized?
Any help appreciated,
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22b/64bit LINUX XFCE
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
