studying this my problem (which is connected to the use of the UEFI on HP computers in place of the traditional BIOS) I found this link:
http://www.rodsbooks.com/efi-bootloaders/index.html
There is wrote : http://www.rodsbooks.com/efi-bootloaders/index.html
"The way EFI computers boot is very different from the way older computers based on the Basic Input/Output System (BIOS) boot."
On Mon, Mar 16, 2015 at 4:07 AM, Angelo Moreschini <mrangelo.fedora@xxxxxxxxx> wrote:
the output for lsblk is :I see the partition I made for Fesora in sda8
[liveuser@localhost ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 1023M 0 part
├─sda2 8:2 0 360M 0 part
├─sda3 8:3 0 128M 0 part
├─sda4 8:4 0 439.6G 0 part
├─sda5 8:5 0 10.4G 0 part
├─sda6 8:6 0 1M 0 part
├─sda7 8:7 0 500M 0 part /mnt/sysimage/boot
└─sda8 8:8 0 479.6G 0 part
├─fedora_localhost-swap 253:3 0 7.8G 0 lvm [SWAP]
├─fedora_localhost-home 253:4 0 421.7G 0 lvm /mnt/sysimage/home
└─fedora_localhost-root 253:5 0 50G 0 lvm /mnt/sysimage
sr0 11:0 1 1.4G 0 rom /run/initramfs/live
loop0 7:0 0 12K 1 loop
loop1 7:1 0 1.8M 1 loop
└─live-osimg-min 253:2 0 6G 1 dm
loop2 7:2 0 1.3G 1 loop
loop3 7:3 0 6G 1 loop
├─live-rw 253:0 0 6G 0 dm /
├─live-base 253:1 0 6G 1 dm
└─live-osimg-min 253:2 0 6G 1 dm
loop4 7:4 0 512M 0 loop
└─live-rw 253:0 0 6G 0 dm /
--------------------
smartctl -x /dev/sda8 produce this output :
================================================
[root@localhost ~]# smartctl -x /dev/sda8
smartctl 6.2 2014-07-16 r3952 [x86_64-linux-3.17.4-301.fc21.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1ER162
Serial Number: Z4Y5HTPQ
LU WWN Device Id: 5 000c50 07aaff0a2
Firmware Version: HP51
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Mar 16 04:06:01 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 80) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 104) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 115 100 006 - 84045512
3 Spin_Up_Time PO---K 098 098 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 102
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-K 063 060 030 - 1885699
9 Power_On_Hours -O--CK 100 100 000 - 76
10 Spin_Retry_Count PO--CK 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 98
180 Unknown_HDD_Attribute -O-R-K 100 100 000 - 910152834
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0 0 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 070 064 045 - 30 (Min/Max 28/31)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 27
193 Load_Cycle_Count -O--CK 100 100 000 - 466
194 Temperature_Celsius -O---K 030 040 000 - 30 (0 18 0 0 0)
196 Reallocated_Event_Count -O--CK 100 100 036 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xb6 GPL VS 1918 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc1 GPL,SL VS 10 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 30 -
# 2 Extended offline Interrupted (host reset) 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 28/31 Celsius
Lifetime Min/Max Temperature: 18/35 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (1)
Index Estimated Time Temperature Celsius
2 2015-03-10 23:03 30 ***********
3 2015-03-11 00:02 ? -
4 2015-03-11 01:01 23 ****
5 2015-03-11 02:00 ? -
6 2015-03-11 02:59 20 *
7 2015-03-11 03:58 ? -
8 2015-03-11 04:57 27 ********
9 2015-03-11 05:56 ? -
10 2015-03-11 06:55 28 *********
11 2015-03-11 07:54 ? -
12 2015-03-11 08:53 28 *********
13 2015-03-11 09:52 29 **********
14 2015-03-11 10:51 29 **********
15 2015-03-11 11:50 29 **********
16 2015-03-11 12:49 ? -
17 2015-03-11 13:48 18 -
18 2015-03-11 14:47 ? -
19 2015-03-11 15:46 23 ****
20 2015-03-11 16:45 ? -
21 2015-03-11 17:44 26 *******
22 2015-03-11 18:43 ? -
23 2015-03-11 19:42 27 ********
24 2015-03-11 20:41 ? -
25 2015-03-11 21:40 28 *********
26 2015-03-11 22:39 ? -
27 2015-03-11 23:38 31 ************
28 2015-03-12 00:37 ? -
29 2015-03-12 01:36 31 ************
30 2015-03-12 02:35 ? -
31 2015-03-12 03:34 31 ************
32 2015-03-12 04:33 ? -
33 2015-03-12 05:32 31 ************
34 2015-03-12 06:31 ? -
35 2015-03-12 07:30 21 **
36 2015-03-12 08:29 ? -
37 2015-03-12 09:28 25 ******
38 2015-03-12 10:27 ? -
39 2015-03-12 11:26 26 *******
40 2015-03-12 12:25 ? -
41 2015-03-12 13:24 28 *********
42 2015-03-12 14:23 ? -
43 2015-03-12 15:22 28 *********
44 2015-03-12 16:21 ? -
45 2015-03-12 17:20 28 *********
46 2015-03-12 18:19 ? -
47 2015-03-12 19:18 29 **********
48 2015-03-12 20:17 ? -
49 2015-03-12 21:16 29 **********
50 2015-03-12 22:15 ? -
51 2015-03-12 23:14 29 **********
52 2015-03-13 00:13 ? -
53 2015-03-13 01:12 26 *******
54 2015-03-13 02:11 ? -
55 2015-03-13 03:10 28 *********
56 2015-03-13 04:09 ? -
57 2015-03-13 05:08 31 ************
58 2015-03-13 06:07 ? -
59 2015-03-13 07:06 30 ***********
60 2015-03-13 08:05 ? -
61 2015-03-13 09:04 21 **
62 2015-03-13 10:03 ? -
63 2015-03-13 11:02 21 **
64 2015-03-13 12:01 ? -
65 2015-03-13 13:00 21 **
66 2015-03-13 13:59 ? -
67 2015-03-13 14:58 21 **
68 2015-03-13 15:57 ? -
69 2015-03-13 16:56 22 ***
70 2015-03-13 17:55 ? -
71 2015-03-13 18:54 23 ****
72 2015-03-13 19:53 ? -
73 2015-03-13 20:52 25 ******
74 2015-03-13 21:51 ? -
75 2015-03-13 22:50 26 *******
76 2015-03-13 23:49 ? -
77 2015-03-14 00:48 26 *******
78 2015-03-14 01:47 ? -
79 2015-03-14 02:46 27 ********
80 2015-03-14 03:45 ? -
81 2015-03-14 04:44 29 **********
82 2015-03-14 05:43 ? -
83 2015-03-14 06:42 29 **********
84 2015-03-14 07:41 29 **********
85 2015-03-14 08:40 30 ***********
86 2015-03-14 09:39 29 **********
... ..( 4 skipped). .. **********
91 2015-03-14 14:34 29 **********
92 2015-03-14 15:33 28 *********
93 2015-03-14 16:32 29 **********
... ..( 4 skipped). .. **********
98 2015-03-14 21:27 29 **********
99 2015-03-14 22:26 28 *********
100 2015-03-14 23:25 29 **********
101 2015-03-15 00:24 29 **********
102 2015-03-15 01:23 28 *********
103 2015-03-15 02:22 29 **********
104 2015-03-15 03:21 28 *********
105 2015-03-15 04:20 28 *********
106 2015-03-15 05:19 29 **********
107 2015-03-15 06:18 29 **********
108 2015-03-15 07:17 29 **********
109 2015-03-15 08:16 30 ***********
110 2015-03-15 09:15 30 ***********
111 2015-03-15 10:14 30 ***********
112 2015-03-15 11:13 29 **********
... ..( 10 skipped). .. **********
123 2015-03-15 22:02 29 **********
124 2015-03-15 23:01 28 *********
125 2015-03-16 00:00 29 **********
126 2015-03-16 00:59 28 *********
127 2015-03-16 01:58 29 **********
0 2015-03-16 02:57 28 *********
1 2015-03-16 03:56 29 **********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
[root@localhost ~]#On Sun, Mar 15, 2015 at 11:07 AM, Chris Murphy <lists@xxxxxxxxxxxxxxxxx> wrote:On Sun, Mar 15, 2015 at 12:08 AM, Angelo Moreschini
<mrangelo.fedora@xxxxxxxxx> wrote:
> Hi Chris,
>
> I send you again this message
>
> I followed your suggestion:
> I tried efibootmgr -v
> and I got this output:
> "efibootmgr: EFI variables are not supported on this system."
This system isn't booting in UEFI mode.
What do you get for
# lsblk
Does it show your drive? If so,,
# smartctl -x /dev/sdX ##where X is probably a from the above command.
> ----------
> P.S. I cannot send you the content of dmesg.
> The moderator reject my message because to much size..
> but I can find inside it if you say me what to look for.
> -------------
This is the bug I filed before I realized my problem was hardware
related. Under "Additional info" you'll see the lines that are missing
from dmesg when the problem happens.
https://bugzilla.redhat.com/show_bug.cgi?id=1182387
--
Chris Murphy
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
