On Sat, 17 Jan 2015 23:08:42 +0100 Felix Schwarz <fschwarz@xxxxxxxxxxxxxxxxx> wrote: > > Am 17.01.2015 um 21:13 schrieb Ranjan Maitra: > > and the PyPDF2 is this one: > > > > https://mstamy2.github.io/PyPDF2/ > > There are a few requests for PyPDF2 in bugzilla. As I mentioned a couple of > times I'd like to see a new package for that instead of upgrading pypdf > itself. You should be able to find some spec file attempts in one of the open > bugs. > > If you are going to submit a pypdf2 package for review feel free to cc me in bz. Hi, I did successfully create a PyPDF2 rpm using the following spec file (it was a trial-and-error and it seems to "work"). $ fpaste PyPDF2.spec Uploading (2.7KiB)... http://ur1.ca/jqd0j -> http://paste.fedoraproject.org/185671/39788881 However, I did not have as much success with creating a RPM for stapler so I was wondering if someone could help me with the spec file (I have almost no experience with python and python spec files). Here is the spec file: $ fpaste pdfstapler.spec Uploading (2.2KiB)... http://ur1.ca/jqd0u -> http://paste.fedoraproject.org/185673/42397898 However, the rpmbuild gives me the following errors: $ rpmbuild -bb pdfstapler.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5bzBrf + umask 022 + cd /home/maitra/rpmbuild/BUILD + cd /home/maitra/rpmbuild/BUILD + rm -rf stapler-master + /usr/bin/unzip -qq /home/maitra/rpmbuild/SOURCES/master.zip + STATUS=0 + '[' 0 -ne 0 ']' + cd stapler-master + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ryc7by + umask 022 + cd /home/maitra/rpmbuild/BUILD + cd stapler-master + /usr/bin/python setup.py build running build running build_py creating build creating build/lib creating build/lib/staplelib copying staplelib/commands.py -> build/lib/staplelib copying staplelib/stapler.py -> build/lib/staplelib copying staplelib/tests.py -> build/lib/staplelib copying staplelib/iohelper.py -> build/lib/staplelib copying staplelib/__init__.py -> build/lib/staplelib running egg_info creating stapler.egg-info writing requirements to stapler.egg-info/requires.txt writing stapler.egg-info/PKG-INFO writing top-level names to stapler.egg-info/top_level.txt writing dependency_links to stapler.egg-info/dependency_links.txt writing entry points to stapler.egg-info/entry_points.txt writing manifest file 'stapler.egg-info/SOURCES.txt' reading manifest file 'stapler.egg-info/SOURCES.txt' writing manifest file 'stapler.egg-info/SOURCES.txt' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Iq93nR + umask 022 + cd /home/maitra/rpmbuild/BUILD + '[' /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 '!=' / ']' + rm -rf /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 ++ dirname /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 + mkdir -p /home/maitra/rpmbuild/BUILDROOT + mkdir /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 + cd stapler-master + rm -rf /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 + /usr/bin/python setup.py install -O1 --skip-build --root /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 running install running install_lib creating /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 creating /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr creating /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib creating /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7 creating /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages creating /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib copying build/lib/staplelib/commands.py -> /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib copying build/lib/staplelib/stapler.py -> /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib copying build/lib/staplelib/tests.py -> /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib copying build/lib/staplelib/iohelper.py -> /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib copying build/lib/staplelib/__init__.py -> /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib byte-compiling /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib/commands.py to commands.pyc byte-compiling /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib/stapler.py to stapler.pyc byte-compiling /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib/tests.py to tests.pyc byte-compiling /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib/iohelper.py to iohelper.pyc byte-compiling /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/staplelib/__init__.py to __init__.pyc writing byte-compilation script '/tmp/tmpSBKHMb.py' /usr/bin/python -O /tmp/tmpSBKHMb.py removing /tmp/tmpSBKHMb.py running install_egg_info running egg_info writing requirements to stapler.egg-info/requires.txt writing stapler.egg-info/PKG-INFO writing top-level names to stapler.egg-info/top_level.txt writing dependency_links to stapler.egg-info/dependency_links.txt writing entry points to stapler.egg-info/entry_points.txt reading manifest file 'stapler.egg-info/SOURCES.txt' writing manifest file 'stapler.egg-info/SOURCES.txt' Copying stapler.egg-info to /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info running install_scripts Installing stapler script to /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/bin + /usr/lib/rpm/find-debuginfo.sh --strict-build-id -m --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 /home/maitra/rpmbuild/BUILD/stapler-master /usr/lib/rpm/sepdebugcrcfix: Updated 0 CRC32s, 0 CRC32s did match. find: 'debug': No such file or directory + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 Bytecompiling .py files below /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64/usr/lib/python2.7 using /usr/bin/python2.7 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-java-repack-jars Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/maitra/rpmbuild/BUILDROOT/stapler-master-.fc21.x86_64 error: Installed (but unpackaged) file(s) found: /usr/bin/stapler /usr/lib/python2.7/site-packages/staplelib/__init__.py /usr/lib/python2.7/site-packages/staplelib/__init__.pyc /usr/lib/python2.7/site-packages/staplelib/__init__.pyo /usr/lib/python2.7/site-packages/staplelib/commands.py /usr/lib/python2.7/site-packages/staplelib/commands.pyc /usr/lib/python2.7/site-packages/staplelib/commands.pyo /usr/lib/python2.7/site-packages/staplelib/iohelper.py /usr/lib/python2.7/site-packages/staplelib/iohelper.pyc /usr/lib/python2.7/site-packages/staplelib/iohelper.pyo /usr/lib/python2.7/site-packages/staplelib/stapler.py /usr/lib/python2.7/site-packages/staplelib/stapler.pyc /usr/lib/python2.7/site-packages/staplelib/stapler.pyo /usr/lib/python2.7/site-packages/staplelib/tests.py /usr/lib/python2.7/site-packages/staplelib/tests.pyc /usr/lib/python2.7/site-packages/staplelib/tests.pyo /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/PKG-INFO /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/SOURCES.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/dependency_links.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/entry_points.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/not-zip-safe /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/requires.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/top_level.txt RPM build errors: Installed (but unpackaged) file(s) found: /usr/bin/stapler /usr/lib/python2.7/site-packages/staplelib/__init__.py /usr/lib/python2.7/site-packages/staplelib/__init__.pyc /usr/lib/python2.7/site-packages/staplelib/__init__.pyo /usr/lib/python2.7/site-packages/staplelib/commands.py /usr/lib/python2.7/site-packages/staplelib/commands.pyc /usr/lib/python2.7/site-packages/staplelib/commands.pyo /usr/lib/python2.7/site-packages/staplelib/iohelper.py /usr/lib/python2.7/site-packages/staplelib/iohelper.pyc /usr/lib/python2.7/site-packages/staplelib/iohelper.pyo /usr/lib/python2.7/site-packages/staplelib/stapler.py /usr/lib/python2.7/site-packages/staplelib/stapler.pyc /usr/lib/python2.7/site-packages/staplelib/stapler.pyo /usr/lib/python2.7/site-packages/staplelib/tests.py /usr/lib/python2.7/site-packages/staplelib/tests.pyc /usr/lib/python2.7/site-packages/staplelib/tests.pyo /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/PKG-INFO /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/SOURCES.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/dependency_links.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/entry_points.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/not-zip-safe /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/requires.txt /usr/lib/python2.7/site-packages/stapler-0.3.0-py2.7.egg-info/top_level.txt Any suggestions as to what I am doing wrong/how to correct it? Many thanks and best wishes, Ranjan ____________________________________________________________ FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on your desktop! Check it out at http://www.inbox.com/marineaquarium -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
