Hello, I am trying a fedora 20 to fedora 21 for a DVD I launched fedup --device /mnt/sr0 --product=nonproduct Then I boot on fedup. The installation started fine. Then I lived. When I returned, the machine had reboot on the DVD. Hence I restarted the machine but there are non option to boot on the new installation. While https://fedoraproject.org/wiki/FedUp#How_Can_I_Upgrade_My_System_with_FedUp.3F says Once the upgrade process has completed, the system will reboot and an option to boot Fedora 21 will be on the grub menu while: fedup.log says [ 27.188] (II) fedup:message() WARNING: no new kernel will be installed during upgrade Then I try to boot on the kernel 20 The boot was OK, It booted in text mode. I run startx but no graphics ! I attach the log file Anyway I check on the installed packages. There is no kernel 21 installed ! Here is the end of the fedup.log: [ 27.188] (II) fedup:message() WARNING: no new kernel will be installed during upgrade [ 27.189] (II) fedup:<module>() /bin/fedup exiting cleanly at Sat Jan 31 17:15:57 2015 [ 0.160] (II) fedup:<module>() /usr/bin/fedup 0.9.0 starting at Sat Jan 31 17:48:51 2015 [ 0.266] (II) fedup.sysprep:remove_cache() removing /var/cache/system-upgrade [ 0.296] (II) fedup.sysprep:remove_cache() removing /var/lib/system-upgrade [ 0.297] (WW) fedup.util:rm_f() failed to remove /var/lib/system-upgrade: [Errno 30] Read-only file system: '/var/lib/system-upgrade/media/.discinfo' [ 0.297] (II) fedup.sysprep:remove_cache() removing /var/cache/system-upgrade [ 0.297] (II) fedup.sysprep:remove_cache() removing /var/lib/system-upgrade [ 0.297] (WW) fedup.util:rm_f() failed to remove /var/lib/system-upgrade: [Errno 30] Read-only file system: '/var/lib/system-upgrade/media/.discinfo' [ 0.297] (II) fedup.sysprep:misc_cleanup() removing symlink /system-upgrade [ 0.298] (II) fedup.sysprep:misc_cleanup() removing /system-upgrade-root [ 0.298] (II) fedup.sysprep:misc_cleanup() removing /lib/systemd/system/system-upgrade.target.requires [ 0.299] (II) fedup:<module>() /usr/bin/fedup exiting cleanly at Sat Jan 31 17:48:51 2015 upgrade.log seems OK Should I boot again on the fedup (21) kernel? Thank for your help. =========================================================================== Patrick DUPRÉ | | email: pdupre@xxxxxxx Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================
[ 54.681] X.Org X Server 1.14.4 Release Date: 2013-10-31 [ 54.681] X Protocol Version 11, Revision 0 [ 54.681] Build Operating System: 3.17.2-200.fc20.x86_64 [ 54.682] Current Operating System: Linux Teucidide 3.17.8-200.fc20.x86_64 #1 SMP Thu Jan 8 23:26:57 UTC 2015 x86_64 [ 54.682] Kernel command line: BOOT_IMAGE=/vmlinuz-3.17.8-200.fc20.x86_64 root=UUID=da1fb213-c138-4711-aba2-76a598506283 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=latarcyrheb-sun16 KEYTABLE=uk rd.luks=0 LANG=en_US.UTF-8 [ 54.682] Build Date: 11 December 2014 03:16:53AM [ 54.682] Build ID: xorg-x11-server 1.14.4-13.fc20 [ 54.682] Current version of pixman: 0.32.6 [ 54.682] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 54.682] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 54.683] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 31 20:03:24 2015 [ 54.683] (==) Using config file: "/etc/X11/xorg.conf" [ 54.683] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 54.683] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 54.684] (==) ServerLayout "single head configuration" [ 54.684] (**) |-->Screen "Screen0" (0) [ 54.684] (**) | |-->Monitor "Monitor0" [ 54.684] (**) | |-->Device "Videocard0" [ 54.684] (**) |-->Input Device "Keyboard0" [ 54.684] (==) Automatically adding devices [ 54.684] (==) Automatically enabling devices [ 54.684] (==) Automatically adding GPU devices [ 54.684] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 54.684] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 54.684] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 54.684] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 54.684] (WW) Disabling Keyboard0 [ 54.684] (II) Loader magic: 0x80dd00 [ 54.684] (II) Module ABI versions: [ 54.684] X.Org ANSI C Emulation: 0.4 [ 54.684] X.Org Video Driver: 14.1 [ 54.684] X.Org XInput driver : 19.2 [ 54.684] X.Org Server Extension : 7.0 [ 54.684] (II) xfree86: Adding drm device (/dev/dri/card0) [ 54.687] (--) PCI:*(0:0:2:0) 8086:2992:8086:4f43 rev 2, Mem @ 0xd0200000/1048576, 0xc0000000/268435456, I/O @ 0x00002468/8, BIOS @ 0x????????/131072 [ 54.687] Initializing built-in extension Generic Event Extension [ 54.687] Initializing built-in extension SHAPE [ 54.687] Initializing built-in extension MIT-SHM [ 54.687] Initializing built-in extension XInputExtension [ 54.687] Initializing built-in extension XTEST [ 54.687] Initializing built-in extension BIG-REQUESTS [ 54.687] Initializing built-in extension SYNC [ 54.687] Initializing built-in extension XKEYBOARD [ 54.687] Initializing built-in extension XC-MISC [ 54.687] Initializing built-in extension XINERAMA [ 54.687] Initializing built-in extension XFIXES [ 54.687] Initializing built-in extension RENDER [ 54.687] Initializing built-in extension RANDR [ 54.687] Initializing built-in extension COMPOSITE [ 54.687] Initializing built-in extension DAMAGE [ 54.687] Initializing built-in extension MIT-SCREEN-SAVER [ 54.688] Initializing built-in extension DOUBLE-BUFFER [ 54.688] Initializing built-in extension RECORD [ 54.688] Initializing built-in extension DPMS [ 54.688] Initializing built-in extension X-Resource [ 54.688] Initializing built-in extension XVideo [ 54.688] Initializing built-in extension XVideo-MotionCompensation [ 54.688] Initializing built-in extension SELinux [ 54.688] Initializing built-in extension XFree86-VidModeExtension [ 54.688] Initializing built-in extension XFree86-DGA [ 54.688] Initializing built-in extension XFree86-DRI [ 54.688] Initializing built-in extension DRI2 [ 54.688] (II) "glx" will be loaded by default. [ 54.688] (WW) "xwayland" is not to be loaded by default. Skipping. [ 54.688] (II) LoadModule: "dri2" [ 54.688] (II) Module "dri2" already built-in [ 54.688] (II) LoadModule: "glamoregl" [ 54.689] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 54.870] (II) Module glamoregl: vendor="X.Org Foundation" [ 54.870] compiled for 1.14.4, module version = 0.5.1 [ 54.870] ABI class: X.Org ANSI C Emulation, version 0.4 [ 54.870] (II) LoadModule: "glx" [ 54.870] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 54.870] (II) Module glx: vendor="X.Org Foundation" [ 54.870] compiled for 1.14.4, module version = 1.0.0 [ 54.870] ABI class: X.Org Server Extension, version 7.0 [ 54.870] (==) AIGLX enabled [ 54.870] Loading extension GLX [ 54.870] (II) LoadModule: "intel" [ 54.870] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 54.881] (II) Module intel: vendor="X.Org Foundation" [ 54.881] compiled for 1.14.4, module version = 2.21.15 [ 54.881] Module class: X.Org Video Driver [ 54.881] ABI class: X.Org Video Driver, version 14.1 [ 54.881] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 54.882] (++) using VT number 1 [ 54.884] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 54.884] (==) intel(0): RGB weight 888 [ 54.884] (==) intel(0): Default visual is TrueColor [ 54.884] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965Q [ 54.884] (**) intel(0): Relaxed fencing enabled [ 54.884] (**) intel(0): Wait on SwapBuffers? enabled [ 54.884] (**) intel(0): Triple buffering? enabled [ 54.884] (**) intel(0): Framebuffer tiled [ 54.884] (**) intel(0): Pixmaps tiled [ 54.884] (**) intel(0): 3D buffers tiled [ 54.884] (**) intel(0): SwapBuffers wait enabled [ 54.884] (==) intel(0): video overlay key set to 0x101fe [ 54.916] (II) intel(0): Output VGA-0 using monitor section Monitor0 [ 54.950] (II) intel(0): EDID for output VGA-0 [ 54.950] (II) intel(0): Manufacturer: SAM Model: 1ad Serial#: 1112683056 [ 54.950] (II) intel(0): Year: 2006 Week: 26 [ 54.950] (II) intel(0): EDID Version: 1.3 [ 54.950] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 54.950] (II) intel(0): Sync: Separate Composite SyncOnGreen [ 54.950] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 31 [ 54.950] (II) intel(0): Gamma: 2.20 [ 54.950] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 54.950] (II) intel(0): First detailed timing is preferred mode [ 54.950] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 54.950] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 54.950] (II) intel(0): Supported established timings: [ 54.950] (II) intel(0): 720x400@70Hz [ 54.950] (II) intel(0): 640x480@60Hz [ 54.950] (II) intel(0): 640x480@67Hz [ 54.950] (II) intel(0): 640x480@72Hz [ 54.950] (II) intel(0): 640x480@75Hz [ 54.950] (II) intel(0): 800x600@56Hz [ 54.950] (II) intel(0): 800x600@60Hz [ 54.950] (II) intel(0): 800x600@72Hz [ 54.950] (II) intel(0): 800x600@75Hz [ 54.950] (II) intel(0): 832x624@75Hz [ 54.950] (II) intel(0): 1024x768@60Hz [ 54.950] (II) intel(0): 1024x768@70Hz [ 54.950] (II) intel(0): 1024x768@75Hz [ 54.950] (II) intel(0): 1280x1024@75Hz [ 54.950] (II) intel(0): 1152x864@75Hz [ 54.950] (II) intel(0): Manufacturer's mask: 0 [ 54.950] (II) intel(0): Supported standard timings: [ 54.950] (II) intel(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 54.950] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 54.950] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 54.950] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 54.950] (II) intel(0): Supported detailed timing: [ 54.950] (II) intel(0): clock: 162.0 MHz Image Size: 408 x 306 mm [ 54.950] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0 [ 54.950] (II) intel(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0 [ 54.950] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz [ 54.950] (II) intel(0): Monitor name: SyncMaster [ 54.950] (II) intel(0): Serial No: HVYL606149 [ 54.950] (II) intel(0): EDID (in hex): [ 54.950] (II) intel(0): 00ffffffffffff004c2dad0130325242 [ 54.950] (II) intel(0): 1a1001030e291f782aee95a3544c9926 [ 54.950] (II) intel(0): 0f5054bfef80a94081808140714f0101 [ 54.950] (II) intel(0): 010101010101483f403062b0324040c0 [ 54.950] (II) intel(0): 130098321100001e000000fd00384b1e [ 54.951] (II) intel(0): 5111000a202020202020000000fc0053 [ 54.951] (II) intel(0): 796e634d61737465720a2020000000ff [ 54.951] (II) intel(0): 004856594c3630363134390a20200084 [ 54.951] (II) intel(0): Printing probed modes for output VGA-0 [ 54.951] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz UeP) [ 54.951] (II) intel(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz) [ 54.951] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 54.951] (II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz) [ 54.951] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 54.951] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 54.951] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 54.951] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 54.951] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 54.951] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 54.951] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 54.951] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 54.951] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 54.951] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 54.951] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 54.951] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 54.951] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 54.951] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 54.951] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 54.951] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 54.951] (II) intel(0): Output VGA-0 connected [ 54.951] (II) intel(0): Using user preference for initial modes [ 54.951] (II) intel(0): Output VGA-0 using initial mode 1600x1200 +0+0 [ 54.951] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 54.951] (II) intel(0): Kernel page flipping support detected, enabling [ 54.951] (==) intel(0): DPI set to (96, 96) [ 54.951] (II) Loading sub module "fb" [ 54.951] (II) LoadModule: "fb" [ 54.952] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 54.952] (II) Module fb: vendor="X.Org Foundation" [ 54.952] compiled for 1.14.4, module version = 1.0.0 [ 54.952] ABI class: X.Org ANSI C Emulation, version 0.4 [ 54.952] (II) Loading sub module "dri2" [ 54.952] (II) LoadModule: "dri2" [ 54.952] (II) Module "dri2" already built-in [ 54.952] (==) Depth 24 pixmap format is 32 bpp [ 54.952] (II) intel(0): [DRI2] Setup complete [ 54.952] (II) intel(0): [DRI2] DRI driver: i965 [ 54.952] (II) intel(0): Allocated new frame buffer 1600x1200 stride 6656, tiled [ 54.971] (II) UXA(0): Driver registered support for the following operations: [ 54.971] (II) solid [ 54.971] (II) copy [ 54.971] (II) composite (RENDER acceleration) [ 54.971] (II) put_image [ 54.971] (II) get_image [ 54.971] (==) intel(0): Backing store disabled [ 54.971] (==) intel(0): Silken mouse enabled [ 54.971] (II) intel(0): Initializing HW Cursor [ 54.971] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 54.971] (**) intel(0): DPMS enabled [ 54.971] (==) intel(0): Intel XvMC decoder enabled [ 54.971] (II) intel(0): Set up textured video [ 54.971] (II) intel(0): Set up overlay video [ 54.972] (II) intel(0): [XvMC] i965_xvmc driver initialized. [ 54.972] (II) intel(0): direct rendering: DRI2 Enabled [ 54.972] (==) intel(0): hotplug detection: "enabled" [ 55.011] (--) RandR disabled [ 55.023] (II) SELinux: Disabled by boolean [ 55.045] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 55.045] (II) AIGLX: enabled GLX_INTEL_swap_event [ 55.045] (II) AIGLX: enabled GLX_ARB_create_context [ 55.045] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 55.045] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 55.045] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 55.045] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 55.045] (II) AIGLX: Loaded and initialized i965 [ 55.045] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 55.046] (II) intel(0): Setting screen physical size to 423 x 317 [ 55.276] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 55.276] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 55.276] (**) Power Button: Applying InputClass "system-setup-keyboard" [ 55.276] (II) LoadModule: "evdev" [ 55.276] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 55.277] (II) Module evdev: vendor="X.Org Foundation" [ 55.277] compiled for 1.14.4, module version = 2.8.4 [ 55.277] Module class: X.Org XInput Driver [ 55.277] ABI class: X.Org XInput driver, version 19.2 [ 55.277] (II) Using input driver 'evdev' for 'Power Button' [ 55.277] (**) Power Button: always reports core events [ 55.277] (**) evdev: Power Button: Device: "/dev/input/event1" [ 55.277] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 55.277] (--) evdev: Power Button: Found keys [ 55.277] (II) evdev: Power Button: Configuring as keyboard [ 55.277] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 55.277] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 55.277] (**) Option "xkb_rules" "evdev" [ 55.277] (**) Option "xkb_model" "pc105" [ 55.277] (**) Option "xkb_layout" "gb" [ 55.277] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 55.323] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 55.323] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 55.323] (**) Sleep Button: Applying InputClass "system-setup-keyboard" [ 55.323] (II) Using input driver 'evdev' for 'Sleep Button' [ 55.323] (**) Sleep Button: always reports core events [ 55.323] (**) evdev: Sleep Button: Device: "/dev/input/event0" [ 55.323] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 55.323] (--) evdev: Sleep Button: Found keys [ 55.323] (II) evdev: Sleep Button: Configuring as keyboard [ 55.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 55.323] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 55.324] (**) Option "xkb_rules" "evdev" [ 55.324] (**) Option "xkb_model" "pc105" [ 55.324] (**) Option "xkb_layout" "gb" [ 55.324] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 55.324] (II) config/udev: Adding drm device (/dev/dri/card0) [ 55.325] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2) [ 55.325] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 55.325] (**) Logitech USB Keyboard: Applying InputClass "system-setup-keyboard" [ 55.325] (II) Using input driver 'evdev' for 'Logitech USB Keyboard' [ 55.325] (**) Logitech USB Keyboard: always reports core events [ 55.325] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2" [ 55.325] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c [ 55.325] (--) evdev: Logitech USB Keyboard: Found keys [ 55.325] (II) evdev: Logitech USB Keyboard: Configuring as keyboard [ 55.325] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/0003:046D:C31C.0001/input/input5/event2" [ 55.325] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8) [ 55.325] (**) Option "xkb_rules" "evdev" [ 55.325] (**) Option "xkb_model" "pc105" [ 55.325] (**) Option "xkb_layout" "gb" [ 55.325] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 55.326] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3) [ 55.326] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 55.326] (**) Logitech USB Keyboard: Applying InputClass "system-setup-keyboard" [ 55.326] (II) Using input driver 'evdev' for 'Logitech USB Keyboard' [ 55.326] (**) Logitech USB Keyboard: always reports core events [ 55.326] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event3" [ 55.326] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c [ 55.326] (--) evdev: Logitech USB Keyboard: Found absolute axes [ 55.326] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist. [ 55.326] (--) evdev: Logitech USB Keyboard: Found keys [ 55.326] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist. [ 55.326] (II) evdev: Logitech USB Keyboard: Configuring as mouse [ 55.326] (II) evdev: Logitech USB Keyboard: Configuring as keyboard [ 55.326] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/0003:046D:C31C.0002/input/input6/event3" [ 55.326] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9) [ 55.326] (**) Option "xkb_rules" "evdev" [ 55.326] (**) Option "xkb_model" "pc105" [ 55.326] (**) Option "xkb_layout" "gb" [ 55.326] (**) Option "xkb_options" "terminate:ctrl_alt_bksp," [ 55.326] (II) evdev: Logitech USB Keyboard: initialized for absolute axes. [ 55.326] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1 [ 55.326] (**) Logitech USB Keyboard: (accel) acceleration profile 0 [ 55.326] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000 [ 55.326] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4 [ 55.327] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7) [ 55.327] (II) No input driver specified, ignoring this device. [ 55.327] (II) This device may have been added with another device file. [ 55.327] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8) [ 55.327] (II) No input driver specified, ignoring this device. [ 55.327] (II) This device may have been added with another device file. [ 55.327] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5) [ 55.327] (II) No input driver specified, ignoring this device. [ 55.327] (II) This device may have been added with another device file. [ 55.328] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6) [ 55.328] (II) No input driver specified, ignoring this device. [ 55.328] (II) This device may have been added with another device file. [ 55.328] (II) config/udev: Adding input device Microsoft Basic Optical Mouse (/dev/input/event4) [ 55.328] (**) Microsoft Basic Optical Mouse: Applying InputClass "evdev pointer catchall" [ 55.328] (II) Using input driver 'evdev' for 'Microsoft Basic Optical Mouse' [ 55.328] (**) Microsoft Basic Optical Mouse: always reports core events [ 55.328] (**) evdev: Microsoft Basic Optical Mouse: Device: "/dev/input/event4" [ 55.328] (--) evdev: Microsoft Basic Optical Mouse: Vendor 0x45e Product 0x84 [ 55.328] (--) evdev: Microsoft Basic Optical Mouse: Found 3 mouse buttons [ 55.328] (--) evdev: Microsoft Basic Optical Mouse: Found scroll wheel(s) [ 55.328] (--) evdev: Microsoft Basic Optical Mouse: Found relative axes [ 55.328] (--) evdev: Microsoft Basic Optical Mouse: Found x and y relative axes [ 55.328] (II) evdev: Microsoft Basic Optical Mouse: Configuring as mouse [ 55.328] (II) evdev: Microsoft Basic Optical Mouse: Adding scrollwheel support [ 55.328] (**) evdev: Microsoft Basic Optical Mouse: YAxisMapping: buttons 4 and 5 [ 55.328] (**) evdev: Microsoft Basic Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 55.328] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:045E:0084.0003/input/input7/event4" [ 55.328] (II) XINPUT: Adding extended input device "Microsoft Basic Optical Mouse" (type: MOUSE, id 10) [ 55.329] (II) evdev: Microsoft Basic Optical Mouse: initialized for relative axes. [ 55.329] (**) Microsoft Basic Optical Mouse: (accel) keeping acceleration scheme 1 [ 55.329] (**) Microsoft Basic Optical Mouse: (accel) acceleration profile 0 [ 55.329] (**) Microsoft Basic Optical Mouse: (accel) acceleration factor: 2.000 [ 55.329] (**) Microsoft Basic Optical Mouse: (accel) acceleration threshold: 4 [ 55.329] (II) config/udev: Adding input device Microsoft Basic Optical Mouse (/dev/input/mouse0) [ 55.329] (II) No input driver specified, ignoring this device. [ 55.329] (II) This device may have been added with another device file. [ 77.467] (II) AIGLX: Suspending AIGLX clients for VT switch [ 78.434] (II) AIGLX: Resuming AIGLX clients after VT switch [ 78.490] (II) intel(0): EDID vendor "SAM", prod id 429 [ 78.490] (II) intel(0): Using EDID range info for horizontal sync [ 78.490] (II) intel(0): Using EDID range info for vertical refresh [ 78.490] (II) intel(0): Printing DDC gathered Modelines: [ 78.490] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 78.490] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 78.490] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 78.490] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 78.490] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 78.490] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 78.490] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 78.490] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 78.490] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 78.490] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 78.490] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 78.490] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 78.490] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 78.490] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 78.490] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 78.490] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 78.490] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 78.490] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 79.435] (II) AIGLX: Suspending AIGLX clients for VT switch [ 82.554] (II) AIGLX: Resuming AIGLX clients after VT switch [ 82.601] (II) intel(0): EDID vendor "SAM", prod id 429 [ 82.601] (II) intel(0): Using hsync ranges from config file [ 82.601] (II) intel(0): Using vrefresh ranges from config file [ 82.601] (II) intel(0): Printing DDC gathered Modelines: [ 82.601] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 82.601] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 82.601] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 82.601] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 82.601] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 82.601] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 82.601] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 82.601] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 82.601] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 82.601] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 82.601] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 82.601] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 82.601] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 82.601] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 82.601] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 82.601] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 82.601] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 82.601] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 83.389] (II) intel(0): EDID vendor "SAM", prod id 429 [ 83.389] (II) intel(0): Using hsync ranges from config file [ 83.389] (II) intel(0): Using vrefresh ranges from config file [ 83.389] (II) intel(0): Printing DDC gathered Modelines: [ 83.389] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 83.389] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 83.389] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 83.389] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 83.389] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 83.389] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 83.389] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 83.389] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 83.389] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 83.389] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 83.389] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 83.389] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 83.389] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 83.389] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 83.389] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 83.389] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 83.389] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 83.389] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 85.007] (II) AIGLX: Suspending AIGLX clients for VT switch [ 86.338] (II) AIGLX: Resuming AIGLX clients after VT switch [ 86.394] (II) intel(0): EDID vendor "SAM", prod id 429 [ 86.394] (II) intel(0): Using hsync ranges from config file [ 86.394] (II) intel(0): Using vrefresh ranges from config file [ 86.394] (II) intel(0): Printing DDC gathered Modelines: [ 86.394] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 86.394] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 86.394] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 86.394] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 86.394] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 86.394] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 86.394] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 86.394] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 86.394] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 86.394] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 86.394] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 86.394] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 86.394] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 86.394] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 86.394] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 86.394] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 86.394] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 86.394] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 87.559] (II) AIGLX: Suspending AIGLX clients for VT switch [ 88.626] (II) AIGLX: Resuming AIGLX clients after VT switch [ 88.681] (II) intel(0): EDID vendor "SAM", prod id 429 [ 88.681] (II) intel(0): Using hsync ranges from config file [ 88.681] (II) intel(0): Using vrefresh ranges from config file [ 88.681] (II) intel(0): Printing DDC gathered Modelines: [ 88.681] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 88.681] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 88.681] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 88.681] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 88.681] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 88.681] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 88.681] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 88.681] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 88.681] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 88.681] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 88.681] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 88.681] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 88.681] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 88.681] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 88.681] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 88.681] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 88.681] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 88.681] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 90.055] (II) AIGLX: Suspending AIGLX clients for VT switch [ 108.545] (II) AIGLX: Resuming AIGLX clients after VT switch [ 108.596] (II) intel(0): EDID vendor "SAM", prod id 429 [ 108.596] (II) intel(0): Using hsync ranges from config file [ 108.596] (II) intel(0): Using vrefresh ranges from config file [ 108.596] (II) intel(0): Printing DDC gathered Modelines: [ 108.596] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 108.596] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 108.596] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 108.596] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 108.596] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 108.596] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 108.596] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 108.596] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 108.596] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 108.596] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 108.596] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 108.596] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 108.596] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 108.596] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 108.596] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 108.596] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 108.596] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 108.596] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 109.884] (II) intel(0): EDID vendor "SAM", prod id 429 [ 109.884] (II) intel(0): Using hsync ranges from config file [ 109.884] (II) intel(0): Using vrefresh ranges from config file [ 109.884] (II) intel(0): Printing DDC gathered Modelines: [ 109.884] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 109.884] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 109.884] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 109.884] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 109.884] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 109.884] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 109.884] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 109.884] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 109.884] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 109.884] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 109.884] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 109.884] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 109.884] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 109.884] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 109.884] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 109.884] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 109.884] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 109.884] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 110.506] (II) AIGLX: Suspending AIGLX clients for VT switch [ 127.144] (II) AIGLX: Resuming AIGLX clients after VT switch [ 127.191] (II) intel(0): EDID vendor "SAM", prod id 429 [ 127.191] (II) intel(0): Using hsync ranges from config file [ 127.191] (II) intel(0): Using vrefresh ranges from config file [ 127.191] (II) intel(0): Printing DDC gathered Modelines: [ 127.191] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 127.191] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 127.191] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 127.191] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 127.191] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 127.191] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 127.191] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 127.191] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 127.191] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 127.191] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 127.191] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 127.191] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 127.191] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 127.191] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 127.191] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 127.191] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 127.191] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 127.191] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 128.852] (II) AIGLX: Suspending AIGLX clients for VT switch [ 130.527] (II) AIGLX: Resuming AIGLX clients after VT switch [ 130.584] (II) intel(0): EDID vendor "SAM", prod id 429 [ 130.584] (II) intel(0): Using hsync ranges from config file [ 130.584] (II) intel(0): Using vrefresh ranges from config file [ 130.584] (II) intel(0): Printing DDC gathered Modelines: [ 130.584] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP) [ 130.584] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 130.584] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 130.584] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 130.584] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 130.584] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 130.584] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 130.584] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 130.584] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 130.584] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 130.584] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 130.584] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 130.584] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 130.584] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 130.584] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 130.584] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 130.584] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 130.584] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 131.147] (II) AIGLX: Suspending AIGLX clients for VT switch [ 270.224] (II) evdev: Microsoft Basic Optical Mouse: Close [ 270.226] (II) UnloadModule: "evdev" [ 270.226] (II) evdev: Logitech USB Keyboard: Close [ 270.226] (II) UnloadModule: "evdev" [ 270.226] (II) evdev: Logitech USB Keyboard: Close [ 270.226] (II) UnloadModule: "evdev" [ 270.226] (II) evdev: Sleep Button: Close [ 270.226] (II) UnloadModule: "evdev" [ 270.226] (II) evdev: Power Button: Close [ 270.226] (II) UnloadModule: "evdev"
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
