On 30.10.2014 22:44, jd1008 wrote: > > On 10/26/2014 09:53 PM, poma wrote: > >> Subscribe, >> http://vger.kernel.org/vger-lists.html#linux-wireless >> and Larry_dot_Finger_at_lwfinger_dot_net is your pal. >> >> When supported it shows like: >> >> $ rpm -qf /usr/lib/firmware/rtlwifi/rtl8712u.bin >> linux-firmware-20141013-41.git0e5f6377.fc20.noarch >> >> $ dmesg >> usb 2-3: new high-speed USB device number 3 using ehci-pci >> usb 2-3: New USB device found, idVendor=0bda, idProduct=8171 >> usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> usb 2-3: Product: RTL8188S WLAN Adapter >> usb 2-3: Manufacturer: Manufacturer Realtek >> usb 2-3: SerialNumber: 00e04c000001 >> r8712u: module is from the staging directory, the quality is unknown, you have been warned. >> r8712u: Staging version >> r8712u: register rtl8712_netdev_ops to netdev_ops >> usb 2-3: r8712u: USB_SPEED_HIGH with 4 endpoints >> usb 2-3: r8712u: Boot from EFUSE: Autoload OK >> usb 2-3: r8712u: CustomerID = 0x0000 >> usb 2-3: r8712u: MAC Address from efuse = 00:01:02:03:04:05 >> usb 2-3: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" >> usbcore: registered new interface driver r8712u >> r8712u 2-3:1.0 wlp0s4f1u3: renamed from wlan0 >> >> $ iwconfig wlp0s4f1u3 >> wlp0s4f1u3 unassociated Nickname:"rtl_wifi" >> Mode:Auto Access Point: Not-Associated Sensitivity:0/0 >> Retry:off RTS thr:off Fragment thr:off >> Power Management:off >> Link Quality:0 Signal level:0 Noise level:0 >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >> >> >> poma >> > Well, I decided to download and build > https://github.com/chunkeey/rtl8192su/archive/master.zip > and loaded the driver. > > It did not detect the presence of my wifi, as shown by iwconfig. > iwconfig only shows my built-in intel wireless card. > > dmesg shows: > > [15749.044546] usbcore: registered new interface driver rtl8192su <<< > Driver loaded > then I plugged in the usb wifi dongle: > [15780.770063] usb 2-2: new high-speed USB device number 3 using ehci-pci > [15780.886492] usb 2-2: New USB device found, idVendor=07d1, idProduct=3304 > [15780.886499] usb 2-2: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [15780.886503] usb 2-2: Product: 11n Adapter > [15780.886506] usb 2-2: Manufacturer: Manufacturer Realtek > [15780.886509] usb 2-2: SerialNumber: 00e04c000001 > > > $ iwconfig > virbr0 no wireless extensions. > > wlp12s0 IEEE 802.11abgn ESSID:"Busters Free Wifi" > Mode:Managed Frequency:2.462 GHz Access Point: > f8:07:37:49:77:20 > Bit Rate=14.4 Mb/s Tx-Power=15 dBm > Retry short limit:7 RTS thr:off Fragment thr:off > Encryption key:off > Power Management:off > Link Quality=57/70 Signal level=-53 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:717 Invalid misc:5741 Missed beacon:0 > > lo no wireless extensions. > > em1 no wireless extensions. > What are the actual steps you did for testing "D-Link FR-300USB 802.11bgn" & "rtl8192su.ko"? Particular firmware you engage? -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
